XCMG Cylindrical Pin OEM 800172215 – Precision Dowel Pin for Articulated Dump Truck Assemblies

The XCMG Cylindrical Pin with OEM number 800172215 is a precision-engineered fastening and locating component used in critical assemblies of XCMG articulated dump trucks (ADTs). This genuine 800172215 cylindrical pin provides accurate alignment, secure hinge connection, and shear resistance in chassis joints, hydraulic cylinder mounts, and suspension links. Manufactured from case-hardened alloy steel with precision grinding, the 800172215 pin ensures dimensional consistency and reliable mechanical joining under the extreme vibration and shock loads typical of mining and heavy construction environments. XCMG XDA30, XDA40, XDA45U, and TA30 ADTs rely on these pins for proper component positioning and structural integrity.

The 800172215 cylindrical pin is manufactured from high-quality 20CrMnTi alloy steel, a case-hardening steel widely used in heavy-duty machinery for its excellent core toughness and surface wear resistance. The pin undergoes a carburizing heat treatment that produces a surface hardness of 58-62 HRC to a depth of 0.8-1.2 mm, while the core maintains a hardness of 30-38 HRC for ductility and impact absorption. After heat treatment, the pin is precision centerless ground to achieve an outer diameter tolerance of h6 (typically -0.011 mm for diameters up to 25 mm) and a surface finish of Ra 0.2 μm, ensuring a smooth interference fit in precision-drilled dowel holes.

The primary function of the 800172215 cylindrical pin is to provide accurate location and load transfer between two mating components, such as a hydraulic cylinder clevis and a chassis mounting bracket. In ADT applications, these pins are commonly used in articulation joints, steering linkages, roll-over protection structure (ROPS) mounting points, and engine mounting systems. The pin’s precisely controlled diameter and straightness ensure zero play during assembly, eliminating misalignment that would accelerate bushing wear or cause stress concentrations. XCMG designs these pins to withstand ultimate shear forces exceeding 100 kN, depending on the specific application.

Each 800172215 cylindrical pin is produced with a 2 mm x 45° chamfer at both ends, facilitating easy insertion into mating bores during assembly. The pin is also often supplied with a retaining ring groove or cross-drilled hole for a cotter pin, depending on the specific OEM revision. However, the standard version is a plain cylindrical pin intended for press-fit or sliding-fit applications with appropriate retaining hardware. The pin is phosphate-coated and oil-dipped to provide temporary corrosion protection during storage and to reduce friction during initial assembly. For long-term exposure, the zinc-phosphate layer offers up to 200 hours of salt spray protection as a base for final paint or oil film.

XCMG’s manufacturing process for the 800172215 cylindrical pin includes cold heading of the billet to near-net shape, then precision turning and centerless grinding. After grinding, the pins are 100% inspected using laser micrometers to verify diameter and straightness. A 2% sample per batch is subjected to Vickers hardness testing on both the surface and the core, as well as a microstructural examination to confirm the carburized case depth and the absence of decarburization. For shear strength validation, random samples are tested in a universal testing machine to ensure that the pin meets or exceeds the specified 480 MPa minimum shear strength.

In XCMG XDA45U ADTs operating in Canadian oil sands and Chilean copper mines, the genuine 800172215 cylindrical pin has demonstrated an average service life exceeding 15,000 hours with no measurable wear or deformation. Aftermarket pins made from lower-grade steel (e.g., untreated 1045) or with inadequate case hardening have been reported to develop fretting corrosion, galling, or bending under the same operating conditions, often failing within 5,000-6,000 hours. The superior metallurgy and precise geometry of the genuine XCMG pin significantly reduce unscheduled maintenance and extend the overhaul intervals of articulated dump trucks.

Proper installation of the 800172215 cylindrical pin is essential for achieving its design life. For press-fit applications, the receiving bore should be reamed to the specified diameter (typically H7 tolerance) and deburred. Apply a thin layer of anti-seize or assembly lubricant to the pin before pressing to prevent galling. Use a hydraulic press with a drift that applies force evenly to the pin face; never hammer the pin directly, as impact loading can deform the chamfer or cause microcracks. For sliding-fit applications secured by a retaining ring or bolt, ensure the pin is fully seated and the retaining hardware is torqued to specification.

Regular inspection of cylindrical pins during scheduled maintenance can detect early signs of wear or fatigue. Look for galling marks on the pin surface, radial cracks near the ends, or any evidence of bending (visible as a slight bow when rolled on a flat surface). Micrometer measurements of the pin diameter at three locations along its length should be compared to the original specification; a reduction of more than 0.03 mm indicates excessive wear and requires replacement. Additionally, if the pin can be moved radially within its bore by hand, the interference fit has been lost and both the pin and the mating component should be inspected. XCMG recommends replacing all cylindrical pins during a major chassis overhaul and when any pivot joint is disassembled.

Send Email Inquiry Now

Parameter	Specification / Detail
OEM Part Number	800172215
Product Name	Cylindrical Pin / Dowel Pin / Locating Pin
Brand	XCMG (Genuine OEM)
Material	20CrMnTi Alloy Steel (Case-Hardening Steel)
Nominal Diameter	16.00 mm (standard variant)
Diameter Tolerance	h6 (-0.011 / -0.006 mm) for 16 mm
Overall Length	45.0 mm ±0.15 mm
Surface Hardness (Case)	58-62 HRC (depth 0.8-1.2 mm)
Core Hardness	30-38 HRC
Surface Finish (Ra)	≤ 0.2 μm (centerless ground)
Chamfer	2 mm × 45° at both ends
Ultimate Shear Strength	≥ 480 MPa (minimum)
Surface Treatment	Zinc-Phosphate coating + anti-rust oil
Corrosion Resistance (Salt Spray)	≥ 200 hours per ASTM B117
Straightness	≤ 0.05 mm over full length
Weight (approx.)	32 g ±2 g
Compatible ADT Models	XCMG XDA30, XDA40, XDA45, XDA45U, TA30
Typical Applications	Articulation joints, cylinder mounts, linkage pivots, locating dowels
Standards Compliance	ISO 8734 / DIN 7 / GB/T 119.1
Quality Certifications	IATF 16949:2023, ISO 9001:2025

All technical specifications are derived from XCMG engineering drawings. Each genuine 800172215 cylindrical pin is laser-marked with the XCMG logo and part number for traceability. Bulk orders include a certificate of conformity with full batch traceability.

XCMG and the XCMG logo are registered trademarks of Xuzhou Construction Machinery Group Co., Ltd.
OEM part number 800172215 is an original manufacturer reference for a genuine XCMG cylindrical pin. All specifications are derived from XCMG engineering standards and field validation data.