XCMG Filter Housing OEM 800195314 – Heavy Duty Filtration for Articulated Dump Trucks
Filter Housing
Корпус фильтра
Carcasa del filtro
The genuine XCMG Filter Housing with OEM number 800195314 is a mission-critical component engineered specifically for XCMG articulated dump trucks operating in mining, quarrying, and heavy construction.
This high-precision housing guarantees optimal filtration performance, effectively protecting hydraulic systems, lubrication circuits, and fuel lines from abrasive contaminants and debris.
Engineered to withstand extreme loads, vibration, and harsh environments, the 800195314 Filter Housing delivers extended service life and maximizes equipment uptime for fleet operators worldwide.
Manufactured under strict XCMG quality standards, the housing features heavy-duty cast iron construction with precision-machined sealing surfaces that prevent any leakage or pressure drops.
Using genuine OEM 800195314 ensures perfect compatibility with XCMG original filter elements, reducing unplanned maintenance and lowering total ownership cost for your ADT fleet.
The Filter Housing 800195314 is cast from high-grade nodular cast iron (EN-GJS-450-10) with a minimum tensile strength of 450 MPa, ensuring outstanding resistance to impact and fatigue under heavy-duty cycles.
Precision CNC machining achieves sealing surface flatness within 0.05 mm, eliminating any risk of by-pass leakage and guaranteeing a perfect mating with the filter head and gasket.
All mounting threads follow ISO metric standard M12x1.75, providing exact fitment for XCMG ADT series including XDA40, XDA45, XDA50, and newer XDA60 models without any adapter.
The housing integrates seamlessly with XCMG’s original bypass valve system, which is calibrated at 1.8 bar cracking pressure to protect the filter element during cold starts or clogging conditions.
Maximum continuous operating pressure is rated at 2.5 MPa (360 psi), while intermittent spikes up to 3.8 MPa are safely absorbed without structural deformation or cracking.
Thermal stability spans from -40°C to +150°C, making the housing reliable in arctic mining sites as well as desert environments where extreme temperature variations are common.
Application Scope & Vehicle Compatibility
This filter housing is specifically designed for XCMG articulated dump trucks used in surface mining, underground excavation, large-scale earthmoving, and aggregate transportation projects globally.
It serves as the core component of the full-flow filtration system, protecting engine lube oil circuits, hydraulic return lines, and fuel pre-filtration modules from premature wear due to particle contamination.
The housing supports both spin-on type filter elements and cartridge-style inserts depending on the specific XCMG ADT model year and configuration, offering flexible maintenance options.
Beyond XCMG original equipment, the 800195314 housing cross-references with several global filtration standards, but for guaranteed reliability we strongly recommend using only XCMG genuine filter kits.
Ideal for mining fleets operating XCMG ADTs in high-silica dust environments where fine abrasive particles rapidly degrade aftermarket housings and cause catastrophic filter failure.
Extreme Condition Performance Data
Field validation tests on XCMG XDA45 dump trucks show that the 800195314 housing maintains leak-free operation after 3,000 hours in high-vibration mining roads with zero seal extrusion or thread loosening.
The housing passed 1,000 hours of salt spray testing per ASTM B117, demonstrating outstanding corrosion resistance even in coastal mines or regions where road deicing chemicals are heavily used.
Vibration endurance according to ISO 16750-3 (random vibration profile for off-highway vehicles) confirmed no fatigue cracks after 500 hours of continuous simulation of severe haul road conditions.
Thermal shock cycling from -40°C to +150°C for 200 cycles (dwell time 2 hours each extreme) resulted in no visible material degradation, gasket extrusion, or dimensional changes beyond 0.02 mm.
Technical Data – Cab Assembly 380603830 (Related Component)
Parameter
Specification (Cab Assembly 380603830)
Part Name
Cab Assembly (Complete ROPS/FOPS certified cab)
OEM Number
380603830
Compatible Models
XCMG ADT XDA40, XDA45, XDA50, XDA60 Series
Weight
1250 kg (complete assembly with interior trim, HVAC, seats)
Integrated HVAC, adjustable suspension seat, digital dashboard, roll-over protection structure
Certification
ISO 3449 (FOPS Level II), ISO 3471 (ROPS), ECE R29
Proper Installation & Maintenance Guide for 800195314
Before installing the new Filter Housing 800195314, thoroughly clean the engine or hydraulic block mounting surface to remove any old gasket residue, dirt, or oil that could compromise sealing.
Always replace the O-ring or gasket with the new one supplied in the genuine XCMG kit – never reuse old seals because they harden and lose elasticity, leading to external leakage.
Tighten the four mounting bolts in a diagonal cross pattern to 45 Nm using a calibrated torque wrench, avoiding over-tightening which could distort the housing flange or strip threads.
After installation, run the engine or hydraulic system for two minutes, then re-check for any signs of leakage around the housing mating face and the filter element connection port.
Inspect the housing externally every 500 operating hours for signs of impact damage, corrosion, or weeping from the seals – early detection prevents costly fluid loss and component starvation.
The housing itself typically lasts over 10,000 hours under normal service conditions when genuine XCMG filter elements and gaskets are used consistently throughout the equipment life.
Failure to use genuine OEM 800195314 may result in improper filter seating, internal bypass leakage, unfiltered oil circulation, and eventual catastrophic failure of pumps, injectors, or bearings.
Aftermarket filter housings often use inferior gray cast iron or even aluminum alloys, which suffer from thermal expansion mismatch, leading to seal extrusion and sudden cracking under load.
Genuine XCMG 800195314 is backed by a full factory warranty and undergoes 100% non-destructive testing including X-ray inspection for porosity and magnetic particle inspection for surface cracks.
The OEM housing features a specially designed internal flow geometry that reduces pressure drop by 12% compared to generic copies, improving fuel economy and hydraulic response time.
Aftermarket units typically skip the integrated bypass valve or use low-quality springs that cause premature opening, allowing unfiltered oil to circulate and damage sensitive components quickly.
By choosing genuine 800195314 you avoid costly downtime due to premature housing failure – each unit is traceable with laser-etched OEM number and batch code for full accountability.
Global logistics support ensures that the 800195314 is stocked in regional warehouses for rapid delivery to mining sites, reducing wait times compared to non-OEM suppliers with uncertain stock.
Advanced Material & Manufacturing Precision
The housing is produced using high-pressure die casting followed by artificial aging heat treatment to relieve residual stresses, ensuring dimensional stability over the entire service life.
All critical sealing surfaces are ground to Ra 0.8 μm surface finish, which guarantees an optimal interface with the elastomeric O-ring, preventing any micro-leakage even under high pulsation.
Laser marking on each housing includes the OEM number 800195314, manufacturing date, and a unique QR code that allows instant verification of authenticity via XCMG’s parts portal.
The housing also incorporates an integrated magnetic drain plug port (M22x1.5) for easy and clean oil sampling or draining during filter changes, a feature absent in most aftermarket copies.
Quality Assurance & Compliance Certifications
Every Filter Housing 800195314 is 100% pressure tested at 3.0 MPa for five minutes using helium mass spectrometry, ensuring zero detectable leakage before leaving the factory.
Material certificates comply with EN 1563:2018 for nodular cast iron grade EN-GJS-450-10, and full chemical analysis reports are available upon request for quality audits.
Dimensional inspection using coordinate measuring machines (CMM) guarantees that all critical tolerances conform to ISO 286-2 class IT8, ensuring interchangeability across all XCMG ADTs.
The manufacturing facility is IATF 16949 certified (automotive quality management) and ISO 14001 for environmental management, reflecting XCMG’s commitment to excellence and sustainability.
Each production batch undergoes a 500-hour accelerated endurance test on a dynamometer-simulated ADT duty cycle to validate structural integrity and sealing performance before batch release.
Genuine XCMG OEM 800195314 Filter Housing — Engineered for durability, tested for performance, and built to keep your articulated dump trucks operating at peak productivity. Choose original XCMG parts for uncompromised reliability.
Hot Sale Genuine XCMG Articulated Dump Truck Parts
