The 803175024 O‑Ring (90 mm × 3.55 mm) is a genuine OEM elastomeric sealing component manufactured by XCMG for motor graders and heavy construction equipment. This precision‑molded seal is designed to prevent hydraulic fluid leakage in static and dynamic applications, ensuring reliable operation of XCMG GR series motor graders. The 90 mm inner diameter and 3.55 mm cross‑sectional diameter follow ISO 3601‑1 standard dimensions, making this O‑Ring fully interchangeable with OEM specifications.
Engineered from premium nitrile rubber (NBR) with a Shore A hardness of 70±5, the 803175024 O‑Ring offers excellent resistance to mineral oils, hydraulic fluids, diesel, and grease. It operates reliably across a temperature range of -40°C to +120°C, matching the demanding thermal conditions of motor grader hydraulic systems. The 3.55 mm cross‑section provides optimal compression characteristics for both static sealing applications (such as manifold and flange joints) and dynamic sealing applications (including piston and rod seals in hydraulic cylinders).
This genuine XCMG O‑Ring 90×3.55 mm directly replaces worn, flattened, or cracked seals on XCMG GR135, GR165, GR180, GR215, GR260, GR300, and GR350 motor graders. It is a critical component in hydraulic cylinder rebuilds, valve block servicing, and general hydraulic system maintenance.
| Parameter | Specification |
|---|---|
| OEM Number | 803175024 |
| Brand | XCMG (Genuine Original Equipment) |
| Product Type | Hydraulic O‑Ring / Elastomeric Seal |
| Inner Diameter (ID) | 90.0 mm (±0.30 mm per ISO 3601‑1 Class A) |
| Cross‑Section (CS) | 3.55 mm (±0.09 mm per ISO 3601‑1 Class A) |
| Material | Nitrile Butadiene Rubber (NBR) |
| Hardness (Shore A) | 70 ±5 (ISO 48‑2 compliant) |
| Tensile Strength | ≥ 14 MPa (2,030 psi) (ISO 37) |
| Elongation at Break | ≥ 200% (ISO 37) |
| Compression Set (100h at 100°C) | ≤ 25% (ISO 815 Method B) |
| Temperature Range (Continuous) | -40°C to +100°C (-40°F to +212°F) |
| Temperature Range (Intermittent) | -40°C to +120°C (-40°F to +248°F) |
| Maximum Operating Pressure | 16 MPa (160 bar / 2,320 psi) static |
| Compatible Fluids | Mineral oil, hydraulic fluid (ISO VG 46/68), diesel, gasoline, grease |
| Standard | ISO 3601‑1 (Class A dimensional tolerances) |
| Color | Black |
| Compatible Models | XCMG GR135, GR165, GR180, GR215, GR260, GR300, GR350 motor graders |
| Superseded Part Numbers | 803175001, 803175045, 803175012 |
The XCMG 803175024 O‑Ring 90×3.55 mm is a fundamental sealing component in the motor grader hydraulic system. An O‑Ring functions by being compressed between two mating surfaces; this initial compression creates a primary seal. When system pressure rises, the hydraulic fluid forces the O‑Ring further into the groove, increasing the sealing contact pressure proportionally to the system pressure—a principle known as pressure‑activated sealing.
This 90×3.55 mm O‑Ring is specified for ISO 3601‑1 Class A dimensional tolerances, ensuring it fits precisely in the corresponding groove. The 3.55 mm cross‑section is a standard metric size used throughout XCMG GR series motor graders. Typical applications include port sealing on large hydraulic control valves, piston and rod sealing in blade lift cylinders, cover sealing on gearboxes and filter housings, and manifold sealing in hydraulic pump assemblies.
When a seal fails—through compression set (flattening), chemical degradation (swelling or hardening), extrusion, or physical damage—hydraulic fluid escapes. A leaking seal not only wastes oil but also reduces system pressure, resulting in sluggish implement response, reduced lifting capacity, and erratic blade control. Replacing a failed O‑Ring with the genuine XCMG 803175024 restores full hydraulic integrity.
The 803175024 O‑Ring is manufactured from premium nitrile butadiene rubber (NBR), the most common and cost‑effective elastomer for hydraulic sealing applications. NBR offers excellent resistance to petroleum‑based oils, mineral hydraulic fluids, diesel fuel, and grease. With a Shore A hardness of 70, this O‑Ring provides an ideal balance between conformability (the ability to fill microscopic surface irregularities) and resistance to extrusion under pressure.
The material formulation meets ISO 9001:2015 quality standards, with a tensile strength exceeding 14 MPa and elongation at break exceeding 200%. The compression set—a measure of an O‑Ring’s ability to recover its original shape after being compressed—is ≤25% after 100 hours at 100°C. This low compression set ensures the seal maintains its sealing force over extended service intervals, even when subjected to high temperatures.
The temperature range of -40°C to +120°C covers all normal operating conditions for motor graders, from arctic cold starts to desert summer operation. However, NBR has limitations: it degrades when exposed to ozone, UV radiation, and brake fluids (DOT). For applications involving phosphate ester hydraulic fluids or extreme chemical exposure, XCMG offers FKM (Viton®) O‑Rings as alternative materials.
Proper installation of the 803175024 O‑Ring is essential for achieving a leak‑free seal. Before installation, clean the groove and mating surfaces thoroughly, removing any old seal fragments, dirt, or corrosion. Inspect the groove for nicks, burrs, or sharp edges that could damage the O‑Ring during assembly. Lightly lubricate the O‑Ring with clean hydraulic oil to ease installation and prevent twisting.
Never use sharp tools to install an O‑Ring; use rounded plastic or brass tools to avoid cutting the rubber. Ensure the O‑Ring is not twisted in the groove. When assembling the mating parts, apply steady, even pressure—do not force components together. If resistance is felt, stop and verify that the O‑Ring is correctly seated in the groove.
After installation, pressure‑test the hydraulic circuit before returning the grader to service. If a leak persists after O‑Ring replacement, check for groove damage, incorrect gland dimensions, or the wrong O‑Ring size. The 90×3.55 mm size is not interchangeable with 89×3.55 mm or 91×3.55 mm; always verify the size before installation.
Aftermarket O‑Rings are often manufactured from lower‑grade rubber compounds with incorrect hardness or poor compression set resistance. The genuine XCMG 803175024 is compounded to meet XCMG’s specific material specifications, ensuring compatibility with the grader’s hydraulic fluid and operating conditions. Aftermarket seals may also have inconsistent dimensional tolerances, leading to either insufficient compression (causing leaks) or excessive compression (causing extrusion and seal failure).
Counterfeit O‑Rings may appear identical but often lack proper post‑curing, resulting in rapid compression set and seal failure within weeks or months. The genuine XCMG seal is fully post‑cured and batch‑tested to guarantee long service life. Additionally, genuine XCMG O‑Rings are individually traceable to their production batch, allowing quality audits if needed.
XCMG provides a 12‑month warranty against manufacturing defects. Each O‑Ring is supplied in genuine XCMG packaging with the part number and lot information clearly marked. This supersedes older numbers 803175001 and 803175045, with improved material formulation for better low‑temperature flexibility and reduced compression set.
Common signs of O‑Ring failure include external oil leakage around the seal location, reduced hydraulic system pressure or sluggish implement response, visible flattening of the O‑Ring when removed, hardening or cracking of the rubber, and swelling or softening from chemical incompatibility. If any of these signs are observed, the O‑Ring should be replaced immediately.
Preventive replacement of O‑Rings is recommended during major hydraulic component rebuilds (cylinders, valves, pumps). The cost of a genuine XCMG O‑Ring is negligible compared to the cost of downtime caused by a hydraulic leak. For critical applications, consider replacing all O‑Rings in a component during overhaul rather than reusing old seals.
Store spare O‑Rings in a cool, dry environment away from direct sunlight, ozone sources (electric motors, welding equipment), and solvents. NBR O‑Rings have a shelf life of approximately 5 years when stored properly. Rotate stock to use older inventory first and maintain a supply of 803175024 O‑Rings in your parts inventory for rapid field repairs.
The 803175024 O‑Ring 90×3.55 mm is stocked in XCMG regional warehouses in North America (Houston), Europe (Rotterdam), Middle East (Dubai), and Asia (Shanghai). Standard air freight delivers within 3‑7 business days worldwide. Expedited shipping (1‑2 days) is available for urgent repairs.
Bulk orders (50+ O‑Rings) receive volume discounts and can be shipped via sea freight. Each O‑Ring is individually packaged in sealed anti‑static bags to prevent contamination and ozone exposure. For large fleets, consignment stock programs are available to ensure immediate availability and reduced downtime.
Don’t let a failed O‑Ring cause hydraulic leaks, oil waste, and costly downtime. Order the genuine XCMG 803175024 O‑Ring 90×3.55 mm today and restore reliable sealing in your motor grader’s hydraulic system.
The 803175024 O‑Ring 90×3.55 mm is a small but critical component in your motor grader’s hydraulic system. A single leaking O‑Ring can cause loss of pressure, reduced implement speed, and messy oil spills that harm the environment and create slip hazards. Keep spare O‑Rings in your service truck for every repair, and always replace with genuine XCMG parts.
Upgrade your motor grader’s hydraulic reliability with the XCMG genuine O‑Ring. Engineered for precision, chemical resistance, and long service life – order now and experience the quality that keeps your grader productive and leak‑free.
