OEM 801973858 The XCMG Rubber Strip L=155 801973858 is a genuine OEM rubber sealing strip that closes, cushions and seals a mounting gap on XCMG hydraulic excavators.
Issued under the official part number 801973858, this strip gives the technician a correctly sized rubber section with a working length of 155 mm for its mounting location.
The strip is molded or extruded to the XCMG drawing, so the cross section, length and edge profile follow the channel or frame it seals against.
A rubber body absorbs vibration and takes up small gaps, so panels, covers and guards do not rattle or leave an open seam.
The rubber compound resists water, dust, oil and ozone, so the strip keeps its shape and sealing ability through wash-down and long outdoor duty.
Every unit is checked for length, cross section, hardness, surface finish and edge quality before it is packed for shipment.
Fitted to cab doors, engine covers, panel edges and guard lips, this rubber strip keeps the machine body sealed, quiet and easy to service.
The 801973858 rubber strip is produced to the XCMG drawing, so the cross section and length fit the channel on the first attempt.
A rubber body absorbs vibration and takes up small gaps, so panels and covers do not rattle against the frame.
The strip closes seams tightly, so dust, water and debris cannot reach the parts behind the mounting face.
The rubber compound resists ozone, UV and ageing, so the strip does not harden or crack in outdoor service.
Because the part matches the OEM number, a fitter installs it straight from the box without cutting or trimming.
Correct hardness keeps the strip springy, so it seals firmly without crushing flat or losing grip over time.
A sound strip also protects panel edges and wiring behind it, which keeps service intervals predictable.
Keeping a spare strip on the shelf shortens repair time, so a worn seal does not leave the cab or cover exposed.
Each lot begins with certified rubber compound tested for hardness, tensile strength and ageing resistance before molding or extrusion.
Strips are molded or extruded in controlled tooling, so the cross section, length and edge profile stay uniform from batch to batch.
Trimming removes ragged edges and flash, so the strip seats cleanly in the channel and does not tear during installation.
Inspectors measure length, section, hardness and surface finish against a gauge for this part number.
Batch records trace every 801973858 rubber strip to its compound lot and production run, so a quality question is settled quickly.
A rubber strip seals a gap or edge, so dust, water and debris cannot reach the parts behind it.
A worn or missing strip leaves an open seam, which lets contamination reach wiring, bearings and hydraulic lines.
The genuine 801973858 keeps the mounting face sealed, so internal parts stay clean and the structure stays quiet.
Correct cross section avoids both a strip that stands proud of the surface and one that is forced into a gap and tears.
A sound strip protects cab doors, covers and panel edges, which keeps service intervals predictable and extends machine life.
The 801973858 rubber strip is installed with a cleaning cloth, a trim tool and a screwdriver during body or service work.
Remove the old strip, clean the channel and check for rust or old adhesive so the new strip seats fully.
Check the panel or frame for cracks, dents or sharp edges, since a damaged face will stop the strip sealing properly.
Press the strip into the channel or along the edge, work it round corners and check that the section sits evenly before final fitting.
Run the machine and check for rattles, gaps or loose sections, then confirm the strip still seals after the panel is closed.
At service intervals, look for hardened rubber, tears or a loose strip and renew the part before water or dust gets in.
Every 801973858 rubber strip is produced in an ISO 9001 and ISO 14001 certified plant with traceability from compound to carton.
Incoming compound is tested for hardness and tensile strength, and finished strips are gauged for length, section and finish.
Each batch is screened for tears, bubbles and surface defects, since these flaws let the strip leak or fail early.
Post-production checks include visual review, dimensional verification and a trial fit in the XCMG channel fixture.
Sample strips from each batch undergo ageing and salt spray tests to confirm sealing and weather performance.
Cheap copies often use hard rubber and rough edges, so the strip will not sit flat and tears at the corners.
A strip with the wrong section or length can leave a gap, rub on the panel or fall out of the channel after a short time.
The genuine 801973858 is made to the XCMG drawing, so section, length, hardness and material match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM panels.
Backed by XCMG global quality standards and technical support, this rubber strip performs reliably in harsh conditions.
Choosing the genuine 801973858 strip prevents a small gap from turning into water damage or a rusted fitting.
A failed strip lets dust and water reach internals, which wears parts and shortens component life.
A correctly made strip holds its shape firmly, so it does not need repeated refitting and does not wear out the channel.
Reliable strips also keep the body line clean, which improves machine appearance and lowers ownership cost.
Service records from construction and mining fleets show genuine XCMG parts cut unplanned downtime.
XCMG produces the 801973858 rubber strip with efficient molding and extrusion runs that keep production scrap low.
A long service life means fewer replacements, which lowers the material and energy tied to each strip.
A good seal prevents water and dust ingress, which protects internal parts and keeps fluids in their circuits.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 801973858 rubber strip is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each unit is bagged to protect the surface and boxed in a strong carton that guards against dust, damp and impact.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the strip straight and the section undistorted until fitting, avoiding the kinks seen in loose storage.
The XCMG Rubber Strip L=155 801973858 is a small but important body part on XCMG excavators, sealing and cushioning a mounting gap.
Its accurate section, springy rubber and durable finish deliver dependable sealing in rain, dust and heat.
By keeping the body line sealed, this strip cuts downtime, protects internal parts and extends the life of the assembly.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 801973858 rubber strip for dependable sealing and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 801973858 – XCMG Rubber Strip L=155 – the definitive sealing strip for clean, protected panel edges on your excavator. Made to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
