OEM 319007673 The XCMG Curved Plate 319007673 is a genuine formed steel panel with a controlled radius that closes, reinforces or guides a curved section of the machine body on XCMG hydraulic excavators.
Issued under the official part number 319007673, the plate gives the technician a correctly shaped part that matches the frame profile, bolt pattern and bend radius it is designed for.
The panel is cut, rolled and drilled to the XCMG drawing, so the curved outline, mounting holes and edge trim follow the housing without hammering or re-forming.
A uniform radius spreads stress along the curve, so the plate resists denting and fatigue better than a flat panel forced into place.
A protective coating resists water, dust and corrosion, so the plate keeps its shape and finish through wash-down and long outdoor duty.
Every unit is checked for radius, arc length, hole spacing, flatness of the fixing lands and surface finish before packing.
Fitted to fenders, wheel arches, covers and curved guards, this plate keeps the machine body closed, stiff and easy to service.
The 319007673 plate is produced to the XCMG drawing, so the radius and fixing holes follow the housing profile on the first attempt.
A controlled radius spreads stress along the curve, so the panel resists denting and fatigue better than a flat sheet forced into place.
The curved form matches the body line, so the plate closes the opening without gaps that let dust or water past the edge.
The coating resists water, dust and wash chemicals, so the panel does not rust through or flake apart in outdoor service.
Because the part matches the OEM number, a fitter installs it straight from the box without rolling, hammering or adding spacers.
Correct thickness keeps the curve rigid under vibration, so the plate does not oil-can or crack at the mounting holes.
A sound plate also shields wiring, hoses and bearings behind the curve, which keeps service intervals predictable.
Keeping a spare plate on the shelf shortens repair time, so a dented panel does not leave internals exposed.
Each lot begins with certified steel sheet tested for thickness, chemistry and coating adhesion before it reaches the rolling line.
Panels are rolled and drilled in controlled tooling, so the radius, arc length and hole pattern stay uniform from batch to batch.
Deburring removes sharp edges from the holes and rim, so the plate seats flat and does not cut hands, hoses or wiring.
Inspectors measure radius, arc length, hole spacing, flatness of the fixing lands and finish against a gauge for this part number.
Batch records trace every 319007673 plate to its steel lot and production run, so a quality question is settled quickly.
A curved plate closes or reinforces a rounded section of the body, so dust, water and debris cannot reach the parts behind it.
A dented or missing panel leaves a gap at the curve, which lets contamination reach bearings, wiring and hydraulic lines.
The genuine 319007673 keeps the body line closed, so internal parts stay clean and the structure stays stiff.
Correct radius avoids both a plate that stands off the frame and one that is forced flat and cracks at the fixing lands.
A sound plate protects the wheel arch, fender and covers, which keeps service intervals predictable and extends machine life.
The 319007673 plate is installed with a cleaning cloth, a spanner set and a screwdriver during body or service work.
Remove the old panel, clean the frame face and check the holes so no dirt or old sealant sits under the new plate.
Check the frame and fixing points for cracks, rust or bent metal, since a damaged face will stop the curved plate sitting flush.
Lift the plate into place, follow the curve against the frame, start the bolts by hand and align the holes before tightening.
Tighten to the torque in the service data, so the plate seals without distorting the curve or crushing the fixing lands.
Run the machine and check for rattles or air gaps along the curve, then confirm the internals are still clear of debris.
At service intervals, look for loose bolts, a dented curve or worn coating and renew the part before internals are exposed.
Every 319007673 plate is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel to carton.
Incoming steel is tested for thickness and chemistry, and finished plates are gauged for radius, arc length and hole spacing.
Each batch is screened for dents, cracks and coating defects, since these flaws let the plate fail or the frame rust.
Post-production checks include visual review, dimensional verification and a trial fit on the XCMG body fixture.
Sample plates from each batch undergo vibration and salt spray tests to confirm strength and corrosion performance.
Cheap copies often use thin sheet and a rough radius, so the plate stands off the frame, rattles or cracks at the holes.
A plate with the wrong radius or hole spacing can sit crooked, rub a hose or leave the curved opening exposed.
The genuine 319007673 is made to the XCMG drawing, so radius, holes, thickness and material match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM frames.
Backed by XCMG global quality standards and technical support, this curved plate performs reliably in harsh conditions.
Choosing the genuine 319007673 plate prevents a small dent from turning into a blocked component or a rusted fitting.
A failed plate lets dust and water reach internals, which wears parts and shortens component life.
A correctly made plate holds its curve firmly, so it does not need repeated tightening and does not wear out the frame holes.
Reliable plates also keep the body line clean, which improves machine appearance and lowers ownership cost.
Service records from construction and mining fleets show genuine XCMG parts cut unplanned downtime.
XCMG produces the 319007673 plate with efficient rolling and forming runs that keep production scrap low.
A long service life means fewer replacements, which lowers the material and energy tied to each plate.
Protecting compartments prevents fluid leaks and contamination, which protects soil, groundwater and internal parts.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 319007673 plate is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each unit is wrapped to protect the coating and boxed in a strong carton that guards against dust, damp and impact.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the curve undistorted until fitting, avoiding the flattened radius seen in loose storage.
The XCMG Curved Plate 319007673 is a small but important body part on XCMG excavators, closing and reinforcing a curved section of the machine.
Its accurate radius, rigid form and durable coating deliver dependable protection in rain, dust and heat.
By keeping the body line closed, this plate cuts downtime, protects internal parts and extends the life of the assembly.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 319007673 plate for dependable protection and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 319007673 – XCMG Curved Plate – the definitive formed panel for clean, protected curved sections on your excavator. Rolled to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
