OEM 319007623 The XCMG Bracket 319007623 is a genuine OEM mounting bracket that holds, aligns and reinforces the components bolted to the frame of XCMG hydraulic excavators.
Issued under the official part number 319007623, this bracket gives the technician a correctly shaped support that matches the mounting face, hole pattern and load direction it was designed for.
The part is cut, bent, drilled and welded to the XCMG drawing, so the fixing points and support angle line up with the frame without filing, shimming or re-drilling.
A properly formed bracket spreads vibration and load across the full contact face, which keeps the mounted component steady and protects the bolts from loosening.
A protective coating resists water, dust and corrosion, so the bracket keeps its shape and finish through wash-down and long outdoor duty on site.
Every unit is checked for hole position, angle, weld quality, flatness of the fixing lands and surface finish before it is packed for shipment.
Fitted to hose guides, panel supports, guards and pipe clamps, this bracket keeps routed lines tidy, fixed and easy to service.
The 319007623 bracket is produced to the XCMG drawing, so the fixing holes and support angle follow the frame profile on the first attempt.
A rigid formed body spreads load across the whole contact face, so the bracket resists bending and fatigue better than a thin flat strap.
The support geometry keeps hoses, pipes and panels at the correct distance from moving parts, which prevents rubbing and chafing.
The coating resists water, dust and wash chemicals, so the part does not rust through or flake apart in outdoor service.
Because the part matches the OEM number, a fitter installs it straight from the box without bending, grinding or adding spacers.
Correct thickness keeps the bracket stiff under vibration, so the mounting bolts do not work loose or oval the frame holes.
A sound bracket also shields wiring and hoses behind it, which keeps routing clean and service intervals predictable.
Keeping a spare bracket on the shelf shortens repair time, so a bent or cracked support does not leave lines loose and exposed.
Each lot begins with certified steel plate tested for thickness, chemistry and coating adhesion before it reaches the cutting line.
Brackets are cut and formed in controlled tooling, so the bend angle, hole pattern and overall size stay uniform from batch to batch.
Deburring removes sharp edges from the holes and rim, so the bracket seats flat and does not cut hands, hoses or wiring.
Inspectors measure hole spacing, bend angle, weld size and flatness of the fixing lands against a gauge for this part number.
Batch records trace every 319007623 bracket to its steel lot and production run, so a quality question is settled quickly.
A bracket holds a component in place, so hoses, cables and guards stay clear of moving parts during digging and travel.
A bent or missing bracket lets a line hang loose, which leads to rubbing, leaks and unexpected downtime on site.
The genuine 319007623 keeps the routing fixed, so internal parts stay clean and the structure stays stiff.
Correct hole spacing avoids both a bracket that will not bolt down and one that is forced into place and cracks at the holes.
A sound bracket protects the guards and covers around it, which keeps service intervals predictable and extends machine life.
The 319007623 bracket is installed with a cleaning cloth, a spanner set and a torque wrench during body or service work.
Remove the old bracket, clean the frame face and check the holes so no dirt or old paint sits under the new part.
Check the frame and fixing points for cracks, rust or bent metal, since a damaged face will stop the bracket sitting flush.
Lift the bracket into place, align the holes by hand, start the bolts finger tight and check the support angle before final tightening.
Tighten to the torque in the service data, so the bracket holds firmly without distorting the frame or crushing the fixing lands.
Run the machine and check for rattles, movement or chafed lines near the bracket, then confirm the routed parts are still clear.
At service intervals, look for loose bolts, a bent arm or worn coating and renew the part before hoses are exposed.
Every 319007623 bracket is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel to carton.
Incoming steel is tested for thickness and chemistry, and finished brackets are gauged for hole spacing and bend angle.
Each batch is screened for dents, cracks and coating defects, since these flaws let the bracket fail or the frame rust.
Post-production checks include visual review, dimensional verification and a trial fit on the XCMG frame fixture.
Sample brackets from each batch undergo vibration and salt spray tests to confirm strength and corrosion performance.
Cheap copies often use thin steel and a rough bend, so the bracket flexes, rattles or cracks at the mounting holes.
A bracket with the wrong hole spacing can sit crooked, rub a hose or leave a routed line hanging loose.
The genuine 319007623 is made to the XCMG drawing, so hole position, angle, thickness and material match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM frames.
Backed by XCMG global quality standards and technical support, this bracket performs reliably in harsh conditions.
Choosing the genuine 319007623 bracket prevents a small crack from turning into a broken line or a damaged component.
A failed bracket lets hoses and cables swing free, which wears parts and shortens component life.
A correctly made bracket holds its angle firmly, so it does not need repeated tightening and does not wear out the frame holes.
Reliable brackets also keep the body layout neat, which improves machine appearance and lowers ownership cost.
Service records from construction and mining fleets show genuine XCMG parts cut unplanned downtime.
XCMG produces the 319007623 bracket with efficient cutting and forming runs that keep production scrap low.
A long service life means fewer replacements, which lowers the material and energy tied to each bracket.
Keeping hoses and wiring fixed prevents leaks and chafing, which protects soil, groundwater and internal parts.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 319007623 bracket is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each unit is wrapped to protect the coating and boxed in a strong carton that guards against dust, damp and impact.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the bend and hole lands undistorted until fitting, avoiding the flattened arms seen in loose storage.
The XCMG Bracket 319007623 is a small but important body part on XCMG excavators, holding and reinforcing a mounted component on the frame.
Its accurate holes, rigid form and durable coating deliver dependable support in rain, dust and heat.
By keeping routed lines fixed, this bracket cuts downtime, protects internal parts and extends the life of the assembly.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 319007623 bracket for dependable support and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 319007623 – XCMG Bracket – the definitive formed support for clean, secure component routing on your excavator. Made to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
