OEM 800159869 The XCMG Guard Plate 800159869 is a genuine formed steel shield that protects hydraulic lines, wiring and structure on XCMG hydraulic excavators.
Issued under the official part number 800159869, the plate gives the fitter a correctly shaped panel that bolts to the machine frame without cutting or drilling.
The panel is formed from steel sheet, then bent, drilled and deburred so the profile clears the parts it shields and matches the mounting points.
Length, width, bend angle and hole positions follow the XCMG drawing, so the guard sits flush and does not rub against hoses or harnesses.
A protective coating resists corrosion, which keeps the panel sound in mud, rain and wash-down conditions on site.
Every guard plate is checked for outline, bend angle, hole spacing and finish before the batch is packed for shipment.
Fitted around the undercarriage and body panels, this guard plate deflects rock, spoil and impact away from sensitive components.
The 800159869 guard plate is formed to the XCMG drawing, so the outline, bend angle and mounting holes match the machine frame exactly.
The steel panel takes impact from rock and spoil without cracking, so hoses, wiring and sensors behind it stay intact.
Correct bend geometry keeps the panel clear of moving parts, so the guard does not rub, rattle or foul the track frame.
Holes are drilled and deburred to the drawing, so the fasteners start by hand and the panel pulls down flush.
A painted or plated finish resists rust, so the guard keeps its strength and appearance through wet and muddy working conditions.
Because the part matches the OEM number, a fitter installs it straight from the pack without cutting, bending or drilling on the machine.
A sound guard plate also keeps mud and debris out of the undercarriage, which reduces cleaning time and wear on components.
Keeping the original profile protects the machine structure, which preserves resale value and keeps the bodywork looking correct.
Production starts with certified steel sheet, checked for grade, thickness and surface condition before blanking begins.
Blanks are cut and bent in hardened tooling to the drawing profile, so each panel repeats the same shape from batch to batch.
Holes are drilled on a fixed pattern and deburred, so fasteners seat flat and the guard pulls down evenly on the frame.
Inspectors measure outline, bend angle, thickness and hole spacing against a gauge for this exact part number.
Batch records trace every 800159869 plate to its steel coil and forming run, so a quality question is settled quickly.
A guard plate sits between the working environment and the components it shields, so debris strikes metal instead of a hose or wire.
Without a proper guard, rock and spoil can cut a hydraulic line, break a sensor or bend a harness, which stops the machine.
The genuine 800159869 keeps the original coverage, so the protected zone stays as wide and as deep as the design intends.
Correct fit also stops the guard from vibrating loose, which is a common cause of cracked panels and rattling on site.
A sound guard protects hoses, wiring and structure, which keeps service intervals predictable and extends machine life.
The 800159869 guard plate is fitted with a torque wrench, a socket set and a lifting aid during body or undercarriage service.
Clean the frame mounting area and check the tapped holes for damage, rust or old thread lock before fitting the panel.
Lift the guard into place and start all fasteners by hand, so the panel lines up without forcing or cross threading.
Tighten the fasteners in a cross pattern to the torque in the service data, so the panel seats flat on the frame.
Check that the guard clears the hoses, harness and moving parts, and that no edge rubs against a tyre or track.
Run the machine and listen for rattles, then recheck the torque on the fasteners after the first working hours.
At service intervals, look for dents, cracks, loose bolts or heavy rust and renew the plate before the protection is lost.
Every 800159869 plate is produced in an ISO 9001 and ISO 14001 certified plant with traceability from coil to carton.
Incoming sheet is checked for grade and thickness, and finished plates are gauged for outline, holes and bend angle.
Each batch is inspected for cracks, laps and edge burrs, since these defects weaken the panel or cut nearby hoses.
Post-production checks include visual review, dimensional verification and a trial fit on the XCMG frame fixture.
Sample plates from each batch undergo coating and impact tests to confirm corrosion performance and resistance to stone strikes.
Cheap copies often use thin sheet or a wrong bend, so the guard flexes, rattles or leaves part of the hose run exposed.
A plate with wrong hole spacing cannot be bolted flat, which leaves it standing proud and easy to tear off on site.
The genuine 800159869 is formed to the XCMG drawing, so outline, thickness, bend and holes match the original panel.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM bodywork.
Backed by XCMG global quality standards and technical support, this guard plate performs reliably in harsh conditions.
Choosing the genuine 800159869 guard plate prevents a stone strike from becoming a cut hose and a lost working day.
A missing guard exposes wiring and sensors to damage, which can cause electrical faults and unexpected shutdowns.
A correctly formed plate stays tight and keeps its coverage, so the protected components reach their design life.
Reliable guards also reduce cleaning and inspection time in the undercarriage, which keeps the machine productive.
Service records from construction and mining fleets show genuine XCMG structural parts cut unplanned downtime.
XCMG produces the 800159869 plate with efficient blanking and forming runs that keep production scrap low.
A long service life means fewer replacements, which reduces the steel and energy tied to each guard.
Protecting hoses and wiring prevents oil spills and electrical faults, which helps operators meet environmental rules.
The steel in this part complies with RoHS and REACH requirements for safe handling and responsible recycling.
The 800159869 guard plate is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each plate is bagged to protect the coating and boxed in a strong carton that guards against damp and distortion.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the panel flat and the edges undamaged until fitting, avoiding the dents seen in loose storage.
The XCMG Guard Plate 800159869 is a key protective part on XCMG excavators, shielding hoses, wiring and structure from impact and debris.
Its accurate profile, correct thickness and protective coating deliver dependable coverage in mud, rain and rough ground.
By keeping the protected zone intact, this guard plate cuts downtime, protects components and extends machine life.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 800159869 guard plate for dependable protection and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 800159869 – XCMG Guard Plate – the definitive steel guard for dependable component protection on your excavator. Formed to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
