OEM 329901655 The XCMG Bucket Nameplate 329901655 is a genuine identification plate that carries the bucket model, capacity and serial data on XCMG hydraulic excavators.
Issued under the official part number 329901655, the plate gives the operator, the service team and the buyer the correct specification stamped at the factory.
The plate is formed from corrosion-resistant metal sheet, then printed or etched with the model data and fixed with rivets or adhesive.
Lettering, layout and plate dimensions follow the XCMG drawing, so the data lines up with the marks used across the machine range.
A clear protective finish keeps the print readable in wet, dusty and salty working conditions where plain labels would fade.
Every plate is checked for print sharpness, size, hole position and surface finish before the batch is packed for shipment.
Fitted to the bucket shell near the mounting ears, this nameplate supports parts ordering, warranty claims and safe loading decisions.
The 329901655 nameplate is produced to the XCMG drawing, so the plate size, layout and printed data match the original fitted at the factory.
The marking method is chosen for long outdoor life, so the bucket model and capacity stay readable through years of digging.
A clear protective finish keeps water, mud and wash chemicals away from the print, so the data does not fade or blister.
The base material resists corrosion and impact, so the plate survives contact with rock, spoil and the bucket teeth.
Holes or adhesive zones follow the drawing, so the plate fixes to the bucket shell with standard rivets or the original bonding method.
Because the part carries the OEM number, a technician replaces a worn or missing plate with the correct data for that bucket.
Correct data on the plate speeds up parts ordering, because the buyer and the dealer read the same model and capacity figures.
A legible nameplate also supports safe operation, since the load limit and bucket type stay visible to the operator and the site team.
Production starts with certified aluminium or stainless sheet, checked for grade, thickness and surface freedom from scratches.
Plates are cut and punched in hardened tooling, so the outline, corner radii and fixing holes repeat exactly from batch to batch.
Marking uses stable inks or etching, and the protective laminate is applied under controlled pressure to avoid bubbles and lifting edges.
Inspectors check size, hole position, print sharpness and finish on a gauge built for this exact part number.
Batch records trace every 329901655 plate to its sheet lot and marking run, so a quality question is settled quickly.
A bucket nameplate records the model, capacity and serial data, so the bucket can be identified even when it is stored apart from the machine.
A missing or unreadable plate makes it hard to confirm the bucket specification, which slows parts ordering and can cause a wrong fitment.
The genuine 329901655 restores the original data, so the workshop, the dealer and the owner all read the same information.
Correct capacity data also helps the operator avoid overloading, which protects the bucket, the linkage and the machine structure.
A sound plate supports warranty claims, because the serial and model data can be verified against the XCMG records.
The 329901655 nameplate is fitted with a rivet gun, a drill and a cleaning cloth during bucket service or refurbishment.
Remove the old plate carefully, then clean the bucket surface of mud, rust, paint and oil so the new plate can sit flat.
Check the surface for dents and weld spatter, because a high spot will bend the plate and make the data hard to read.
Position the plate at the drawing location, mark the holes and drill them to the correct size for the rivets supplied.
Set the rivets evenly, or apply the specified adhesive where the drawing calls for bonding, and press the plate down fully.
Wipe the plate clean and confirm the text is readable from ground level before the machine returns to work.
At service intervals, check for loose rivets, lifting laminate or worn print and renew the plate before the data is lost.
Every 329901655 plate is produced in an ISO 9001 and ISO 14001 certified plant with traceability from sheet to carton.
Incoming sheet is checked for grade and thickness, and finished plates are gauged for size, hole position and thickness.
Each batch is inspected for voids, smears, scratches and edge lifting, since these defects make the data unclear.
Post-production checks include visual review, dimensional verification and a trial fixing on the XCMG bucket fixture.
Sample plates from each batch undergo UV exposure and wash tests to confirm the print and finish stay intact.
Cheap copies often use thin sheet and weak print, so the plate bends easily and the data fades within a season outdoors.
A plate with the wrong data or layout misleads the buyer, which can lead to the wrong bucket parts being ordered.
The genuine 329901655 is produced to the XCMG drawing, so size, holes, material and printed data match the original plate.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps records accurate.
Backed by XCMG global quality standards and technical support, this nameplate performs reliably in harsh conditions.
Choosing the genuine 329901655 plate prevents a wrong parts order, which costs both freight and workshop hours.
A legible plate also prevents overload damage, because the operator can confirm the bucket capacity before filling it.
A durable plate lasts through years of outdoor service, so the bucket stays identifiable without frequent renewal.
Accurate records also speed up resale and fleet audits, which lowers the total cost of ownership across the fleet.
Service records from construction and mining fleets show genuine XCMG identification parts keep data reliable and machines working.
XCMG produces the 329901655 plate with efficient cutting and marking runs that keep production waste low.
A long service life means fewer replacements, which reduces the metal and energy tied to each plate.
Accurate bucket data helps operators avoid overload, which reduces structural damage and wasted material.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 329901655 bucket nameplate is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each plate is packed flat in a protective sleeve and boxed in a strong carton that guards against damp and bending.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the print and finish clean until fitting, avoiding the damage seen in loose storage.
The XCMG Bucket Nameplate 329901655 is a key identification part on XCMG excavators, recording the bucket model, capacity and serial data.
Its accurate marking, corrosion-resistant base and protective finish deliver dependable legibility in mud, rain and dust.
By keeping the data readable, this plate speeds up parts ordering, supports safe loading and protects the resale value.
Purchase only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 329901655 bucket nameplate for dependable identification and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 329901655 – XCMG Bucket Nameplate – the definitive identification plate for accurate bucket data and correct parts ordering on your excavator. Printed to the drawing, finished for long outdoor life, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
