OEM 319006326 The XCMG Transition Plate 319006326 is a genuine machined adapter plate that bridges two different mounting patterns on XCMG excavators.
Issued under the official part number 319006326, the plate gives the fitter a correctly drilled interface that joins one bolt pattern to another.
The body is machined from steel plate, then faced and drilled so both faces sit flat and both hole sets line up.
Plate thickness, hole centres and bore size follow the XCMG drawing, so the adapter seats square without shims.
A protective coating resists corrosion, which keeps the machined faces clean and stops rust bleeding onto the castings.
Every plate is checked for hole pattern, face flatness, bore size and thickness before the batch is packed for shipment.
Used between pumps, motors, valves and hose blocks, this transition plate lets components of different standards bolt together.
The 319006326 plate is machined to the XCMG drawing, so both hole patterns and the centre bore line up with the two components.
Both faces are flat and parallel, so the plate seats squarely and does not tip the pump, motor or valve it carries.
Holes are drilled and deburred to the drawing, so the fasteners slide in on both sides and clamp without reaming.
Correct thickness sets the mounting distance, so the shaft, coupling and seal stay at the designed engagement.
The steel plate takes full bolt torque without distorting, so the joint stays tight through pressure pulses and vibration.
A coated surface resists rust, so the faces stay clean and the fasteners come out easily at the next service.
Because the number matches the OEM part, a fitter installs it straight from the bag without machining or fitting shims.
A sound adapter plate keeps the two components square, which reduces vibration and extends seal and bearing life.
Production starts with certified steel plate, checked for grade, thickness and surface condition before machining begins.
Blanks are machined on CNC equipment, so the outline, centre bore and both hole patterns are cut true to the drawing.
Holes are drilled on fixed patterns and deburred, so fasteners seat flat on both faces and the plate pulls down evenly.
Inspectors measure hole spacing, hole size, bore, thickness and face flatness on a gauge for this exact part number.
Batch records trace every 319006326 plate to its steel lot and machining run, so a quality question is settled quickly.
A transition plate lets a component with one bolt pattern mount onto a housing with a different pattern, without modifying either.
A plate of wrong thickness or offset holes tilts the component, which puts side load on the shaft and wears the seal.
The genuine 319006326 holds the two parts concentric and square, so the coupling and seal run exactly as designed.
Correct flatness and thickness avoid both a rocking mount and a shaft that sits too deep or too shallow in its housing.
A sound plate protects pumps, motors and valves, which keeps service intervals predictable and extends assembly life.
The 319006326 plate is fitted with a torque wrench, socket set and a new seal kit during hydraulic service work.
Release system pressure, drain the affected unit and clean the joint so no dirt enters the circuit during the repair.
Clean both mounting faces and check for burrs, paint or old gasket, since any high spot will tilt the plate.
Fit the seal, locate the plate on its bore and start the fasteners on both sides by hand before tightening any of them.
Tighten in a cross pattern to the torque in the service data, so the plate and component pull down evenly.
Refill with the specified oil, run the machine slowly and check the joint for weeping after the first pressure cycles.
At service intervals, check for oil film, loose fasteners, rust or a tilted component and renew the plate early.
Every 319006326 plate is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel to carton.
Incoming steel is checked for grade and thickness, and finished plates are gauged for holes, bore, thickness and flatness.
Each batch is inspected for burrs, cracks and machining marks, since these defects damage seals and mating faces.
Post-production checks include visual review, dimensional verification and a trial fit on the XCMG mounting fixture.
Sample plates from each batch undergo coating and pressure checks to confirm sealing and corrosion performance.
Cheap copies often have offset holes or a warped face, so the plate cannot be pulled down evenly and the joint leaks.
A plate with the wrong thickness changes the shaft engagement, which puts load on the coupling and wears the seal.
The genuine 319006326 is machined to the XCMG drawing, so holes, bore, thickness and finish match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM housings.
Backed by XCMG global quality standards and technical support, this transition plate performs reliably in harsh conditions.
Choosing the genuine 319006326 plate prevents a small mounting fault from turning into a damaged pump or motor housing.
A misaligned plate wears the coupling and seal, which can stop the machine and contaminate the whole oil circuit.
A coated, correctly machined plate comes apart cleanly at the next service, so fasteners and threads survive reuse.
Reliable mounting also extends seal and bearing life, which lowers the total cost of ownership for fleet operators.
Service records from construction and mining fleets show genuine XCMG hydraulic parts cut unplanned downtime.
XCMG produces the 319006326 plate with efficient machining runs and tight material control that keep scrap low.
A long working life means fewer replacements, which lowers the steel and energy tied to each plate.
Stopping joint leaks protects soil and groundwater, helping operators meet rules on environmentally sensitive sites.
The steel in this part complies with RoHS and REACH requirements for safe handling and responsible recycling.
The 319006326 plate is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each plate is bagged to protect the machined faces and boxed in a strong carton that guards against damp and impact.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps faces flat and edges undamaged until fitting, avoiding the burrs seen in loose storage.
The XCMG Transition Plate 319006326 is a key adapter on XCMG excavators, letting two different mounting patterns join without machining.
Its accurate holes, true faces and correct thickness deliver dependable alignment in hot, wet and dusty conditions.
By keeping components square and tight, this plate cuts downtime, protects seals and bearings and extends assembly life.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 319006326 transition plate for dependable mounting and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 319006326 – XCMG Transition Plate – the definitive adapter plate for a square, tight mounting joint on your excavator. Machined to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
