XCMG Grader Exhaust Pipe OEM 380900985 – Heavy Duty Emission Component

• High-temperature alloy construction – prevents warping and cracking under heavy load cycles.
• Precision mandrel bends – smooth internal surface reduces soot accumulation.
• OE-grade gasket included – ensures leak-free connection to turbocharger and muffler.
• Vibration dampening design – flexible bellows section (pre-installed) absorbs engine movement.

The 380900985 exhaust pipe is specifically developed for XCMG motor graders used in infrastructure projects, mining haul roads, and agricultural land forming. It directly replaces the original exhaust routing on GR2003, GR215, and GR180 series, and is backward compatible with earlier GR models (2008–present) that share the same manifold flange pattern.

This component is critical for maintaining DPF regeneration temperatures and exhaust backpressure within manufacturer specifications. Fleet operators worldwide trust genuine part number 380900985 to avoid aftermarket fitment errors that cause engine overheating or increased fuel consumption.

Every XCMG Exhaust Pipe 380900985 undergoes thermal shock testing (from ambient to 700°C within 90 seconds, repeated 1000 cycles), vibration endurance on a 6-axis shaker table simulating 2000 hours of grader operation, and salt fog corrosion testing per ASTM B117. The welded seams are inspected by magnetic particle and dye penetrant methods to guarantee zero porosity.

With a designed service life exceeding 12,000 operating hours, the 380900985 pipe maintains structural integrity even in high-sulfur fuel environments. XCMG’s rigorous quality control ensures each exhaust pipe meets original assembly line tolerances within ±0.5 mm.

Before installing OEM 380900985, inspect the turbo outlet flange for flatness and clean any carbon deposits. Use new gaskets (recommended XCMG part #GASK-EXH-01) and apply anti-seize compound on the three mounting bolts. Torque the flange nuts to 35–40 Nm in a star pattern. After installation, run the engine at idle for 10 minutes and re-check for leaks.

Routine inspection every 500 hours: check for external cracks, loose hangers, or discoloration indicating excessive heat. The stainless steel construction rarely requires replacement unless physically damaged. Always store spare exhaust pipes in dry, covered areas to protect the coating.

XCMG manufactures the 380900985 exhaust pipe using recycled stainless steel and low-emission welding techniques. The component is 100% recyclable at end-of-life, supporting circular economy principles. Its efficient exhaust flow reduces engine fuel consumption by up to 3%, directly lowering CO₂ emissions per machine hour.

Certified to meet EU Stage V and EPA Tier 4 emission compatibility requirements, the 380900985 pipe ensures your grader remains compliant in regulated markets. By choosing genuine XCMG parts, you contribute to sustainable construction practices while maximizing equipment uptime.

Non-genuine exhaust pipes often use inferior mild steel that rusts within months, causing exhaust leaks that damage turbochargers and increase cab noise. The OEM 380900985 delivers exact fit, superior heat resistance, and factory-backed reliability. Every genuine pipe comes laser-engraved with the OEM number and production batch for full traceability.

With XCMG’s global parts network, the 380900985 exhaust pipe is available for rapid shipment to job sites worldwide. Protect your grader’s engine performance and residual value by insisting on authentic XCMG components.

In summary, the XCMG Exhaust Pipe OEM 380900985 is the definitive solution for maintaining peak exhaust system performance in XCMG motor graders. From its 409 stainless steel body to precision flanges, every detail is optimized for durability and efficiency. Workshop managers and owner-operators can rely on the 380900985 to eliminate downtime caused by cracked or corroded pipes. Upgrade your maintenance inventory with the industry-proven 380900985 – the exhaust pipe that keeps your grader working strong in the toughest conditions.