OEM 860173984 The XCMG Plate 860173984 is a genuine steel plate that provides a flat, rigid base for mounting components on XCMG hydraulic excavators.
Issued under the official part number 860173984, the plate gives the technician a correctly sized base that matches the frame holes, component footprint and clearance it is designed for.
The plate is cut, drilled and folded to the XCMG drawing, so the outline, mounting holes and edge flange line up with the chassis without drilling or slotting.
A flat machined face spreads the clamping load, so the mounted part sits square and does not rock on a high spot.
A protective coating resists water, dust and corrosion, so the plate keeps its strength and finish through wash-down and long outdoor duty.
Every unit is checked for hole spacing, flatness, thickness and surface finish before the batch is packed for shipment.
Fitted to covers, brackets, guards and accessory mounts, this plate keeps supported parts aligned, secure and easy to service.
The 860173984 plate is produced to the XCMG drawing, so the holes and outline line up with the chassis on the first attempt.
A flat, even face spreads the bolt load, so the mounted part sits square and does not rock or stress the fasteners.
Correct thickness keeps the plate rigid under load, so it does not bow or crack at the mounting points.
The coating resists water, dust and wash chemicals, so the plate does not rust through or flake apart in outdoor service.
Because the part matches the OEM number, a fitter installs it straight from the box without drilling, bending or adding spacers.
Even hole spacing spreads the clamping force, so the plate seats flat and does not cock sideways when tightened down.
A sound plate also keeps hoses and harnesses clear of hot or moving parts, which protects them from damage.
Keeping a spare plate on the shelf shortens repair time, so a bent base does not leave a component unsupported.
Each lot begins with certified steel plate tested for thickness, chemistry and tensile strength before it reaches the fabrication line.
Plates are cut and drilled in controlled fixtures, so the outline, hole pattern and thickness stay uniform from batch to batch.
Deburring removes sharp edges from the holes and rim, so the plate seats flat and does not cut hands or the mounted part.
Inspectors measure hole spacing, length, width, thickness and flatness against a gauge made for this exact part number.
Batch records trace every 860173984 plate to its steel lot and production run, so a quality question is settled quickly.
A plate gives a component a flat, rigid base, so the part stays fixed while the machine works and travels.
A bent or cracked plate lets the mounted part shift, which rubs hoses, cracks fittings and causes unexpected failure.
The genuine 860173984 keeps the base flat, so the supported part stays aligned and the mounting points stay intact.
Correct fit avoids both a plate that rocks on a rough frame face and one that sits too close to a hot or moving part.
A sound plate protects hoses, wiring and components, which keeps service intervals predictable and extends machine life.
The 860173984 plate is installed with a cleaning cloth, a spanner set and a torque wrench during body or component service work.
Remove the mounted part, clean the frame face and check the threads so no dirt or metal chips enter during the repair.
Check the chassis and frame for cracks, rust or bent metal, since a damaged face will stop the plate sitting flat.
Lift the plate into place, start the bolts by hand and confirm the holes align before tightening any fastener.
Tighten to the torque in the service data, so the plate stays put without crushing the base or stripping the thread.
Refit the supported part, run the machine slowly and check the plate for movement, rubbing or noise after the first cycles.
At service intervals, look for loose bolts, a bent plate or a worn coating and renew the part before the component shifts.
Every 860173984 plate is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel to carton.
Incoming steel is tested for thickness and chemistry, and finished plates are gauged for hole spacing, length and flatness.
Each batch is screened for dents, cracks and coating defects, since these flaws let the plate fail or the frame rust.
Post-production checks include visual review, dimensional verification and a trial fit on the XCMG chassis fixture.
Sample plates from each batch undergo load, vibration and salt spray tests to confirm strength and corrosion performance.
Cheap copies often use thin sheet and rough holes, so the plate bends, cracks or sits crooked soon after installation.
A plate with the wrong hole spacing or outline can sit crooked, rub a hose or fail to hold the component square.
The genuine 860173984 is made to the XCMG drawing, so outline, holes, thickness and material match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM chassis points.
Backed by XCMG global quality standards and technical support, this plate performs reliably in harsh conditions.
Choosing the genuine 860173984 plate prevents a small bend from turning into a damaged component or a cracked fitting.
A failed plate lets the mounted part shift, which rubs hoses and wiring and shortens the life of the parts around it.
A correctly made plate holds firmly, so it does not need repeated tightening and does not wear out the frame holes.
Reliable plates also keep components in place, which improves machine performance and lowers ownership cost.
Service records from construction and mining fleets show genuine XCMG parts cut unplanned downtime.
XCMG produces the 860173984 plate with efficient cutting and drilling runs that keep production scrap low.
A long service life means fewer replacements, which lowers the material and energy tied to each plate.
Supporting components correctly prevents leaks and damage, which protects soil, groundwater and internal parts.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 860173984 plate is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each unit is wrapped to protect the coating and boxed in a strong carton that guards against dust, damp and impact.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the plate flat and the edges undamaged until fitting, avoiding the distortion seen in loose storage.
The XCMG Plate 860173984 is a small but important structural part on XCMG excavators, giving components a flat, rigid base.
Its accurate size, flat face and durable coating deliver dependable support in rain, dust and heat.
By keeping parts in place, this plate cuts downtime, protects nearby hoses and wiring and extends the life of the assembly.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 860173984 plate for dependable component support and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 860173984 – XCMG Plate – the definitive mounting base for steady, protected components on your excavator. Formed to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
