OEM 804470968 The XCMG Hose Assembly 804470968 is a genuine OEM high‑pressure hydraulic hose built to transfer fluid power reliably in XCMG excavators. Identified by part number 804470968, this assembly delivers leak‑free performance, strong pressure resistance, and long service life in demanding construction and mining work.
It is manufactured from oil‑resistant synthetic rubber with multiple layers of high‑tensile steel wire reinforcement. This structure gives the hose excellent pressure capacity, flexibility, and fatigue resistance under constant cycling.
The 804470968 hose assembly matches original OEM length, fitting orientation, and connector dimensions. It installs as a direct replacement without modification, preserving the machine’s hydraulic balance and safety.
The 804470968 hose assembly is designed for the high‑pressure lines that power boom, arm, bucket, and swing functions on XCMG excavators.
Each layer of construction is selected to handle pressure spikes, continuous cycling, and vibration without losing sealing integrity.
The synthetic rubber inner tube resists attack from hydraulic oil, preventing swelling, cracking, and contamination of the system.
Steel wire braid reinforcement provides strength while allowing the flexibility needed to route the hose through tight machine spaces.
A tough outer cover protects against abrasion, ozone, and sunlight, so the hose keeps performing even after long exposure to weather and dust.
Precision‑crimped fittings create a strong, leak‑free connection that stays tight under pressure and vibration.
Production of the 804470968 uses advanced extrusion, braiding, and crimping processes that hold tight tolerances on every critical dimension.
The rubber compound is mixed and extruded to a uniform thickness, ensuring consistent oil resistance and temperature performance.
Steel wire is braided at the correct angle and tension to deliver the right balance of strength and flexibility for the application.
Fittings are machined and crimped with computer‑controlled equipment, so every assembly has the same secure, leak‑free joint.
After crimping, each hose is pressure tested and visually inspected to confirm it meets XCMG quality requirements.
Batch samples are impulse tested to validate long‑term durability under repeated pressure cycles.
Hydraulic hoses are the conduits that carry pressurized oil between pump, valves, and actuators. Their reliability directly affects machine uptime.
A worn or damaged hose can leak, reduce pressure, and even burst, causing fluid loss and dangerous operating conditions.
The 804470968 assembly is built to resist these failures, keeping fluid contained and system pressure stable.
Its high‑temperature resistance protects against heat from engine and hydraulic components, which can degrade lesser hoses.
Field data from heavy excavation shows that genuine XCMG hoses reduce hydraulic‑related downtime and improve machine availability.
Regular inspection for cracks, abrasion, or leaks is recommended, and any damaged hose should be replaced with the genuine 804470968.
The 804470968 hose assembly is designed for straightforward installation with standard hand tools, reducing downtime during service.
Before fitting, inspect the hose for damage and confirm the routing path is free of sharp edges, heat sources, and moving parts.
Route the hose along the original path to avoid kinking, twisting, or excessive bending that can shorten service life.
Connect the fittings and tighten to the recommended torque, ensuring a secure seal without over‑compressing the connectors.
After installation, run the machine and check for leaks at both ends. Re‑tighten if needed and clean any spilled oil.
During routine maintenance, inspect the hose for wear, cracking, or fitting corrosion and replace it promptly if any issue is found.
Investing in the genuine 804470968 hose assembly helps prevent hydraulic failures that cause fluid loss and expensive downtime.
A single failed hose can spill oil, reduce pressure, and damage pumps, valves, and cylinders, leading to major repair costs.
Over a typical 10,000‑hour service life, hydraulic hoses endure constant pressure cycling and environmental stress.
The 804470968 is built with durable materials and tested to more than 1,000,000 pulse cycles, ensuring consistent performance.
By maintaining leak‑free fluid transfer, it also extends the life of hydraulic pumps, valves, and cylinders.
Field data shows that using genuine XCMG hose assemblies reduces hydraulic‑related downtime by up to twenty percent.
XCMG works to reduce the environmental impact of its products, and the 804470968 reflects that effort through durable design.
The hose typically exceeds 8,000 hours of service in normal conditions, reducing waste from frequent replacements.
By preventing hydraulic fluid leaks, it helps avoid soil and water contamination on job sites.
Materials used in the assembly comply with RoHS and REACH restrictions on hazardous substances.
Choosing genuine XCMG parts supports responsible equipment management and long‑term operational safety.
The 804470968 hose assembly is stocked in XCMG distribution centres across North America, Europe, Asia, and Australia.
Each assembly is packed in protective material and custom cartons to prevent damage and contamination during transit and storage.
For fleet orders, volume pricing and consolidated shipping help reduce procurement costs and simplify inventory planning.
Real‑time inventory visibility supports fast fulfilment of urgent requirements, minimising downtime for active machines.
With XCMG’s global aftermarket network, customers can rely on consistent quality and availability for their fleets.
Every 804470968 hose assembly is produced in an ISO 9001 and ISO 14001 certified facility with full material traceability.
Incoming rubber, steel wire, and fittings are tested for composition, strength, and dimensional accuracy before use.
During production, hose diameter, wall thickness, and crimp compression are monitored continuously.
A one hundred percent pressure test is performed on every finished assembly to confirm sealing integrity.
Sample units from each batch undergo impulse testing to validate durability under repeated pressure cycling.
Only assemblies that pass all checks are released, ensuring reliable performance in the field.
Aftermarket hoses may use lower‑grade rubber, thinner wire, or poor crimping that leads to early failure and leaks.
The genuine 804470968 is engineered to XCMG standards for correct fit, reliable sealing, and long service life.
Its superior materials and precision manufacturing reduce the risk of costly hydraulic failures and unplanned downtime.
Genuine XCMG parts preserve warranty coverage and help maintain the resale value of the machine.
Backed by global quality standards and technical support, this hose assembly is a trusted choice for critical hydraulic systems.
The XCMG 804470968 Hose Assembly is an essential hydraulic component for XCMG excavators, ensuring reliable fluid power transfer.
Its precision design, high‑quality materials, and robust manufacturing deliver dependable performance in harsh conditions.
By preventing leaks and failures, it reduces downtime, lowers maintenance costs, and extends machine service life.
Always source genuine XCMG parts through authorised channels to guarantee authenticity and quality.
Choose the 804470968 hose assembly for dependable hydraulic performance and lasting operational peace of mind.
Partner with XCMG for heavy equipment hydraulic components that deliver real value.
OEM 804470968 – XCMG Hose Assembly – the definitive hydraulic hose solution for your excavator’s fluid power system. Engineered for durability, designed for reliable high‑pressure performance, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
