OEM 801144401 The XCMG Cover 801144401 is a genuine protective panel that closes and shields an internal compartment on XCMG hydraulic excavators.
Issued under the official part number 801144401, the cover gives the technician a correctly sized panel that matches the opening, bolt pattern and clearance it is designed for.
The panel is formed to the XCMG drawing, so the outline, mounting holes and folded edge line up with the housing without forcing.
A folded rim stiffens the panel, so the cover holds its shape and does not flex against nearby hoses, brackets or harnesses.
A protective coating resists oil, water and corrosion, so the cover keeps its finish through wash-down and long outdoor duty.
Every unit is checked for hole spacing, flatness, edge finish and fit before the batch is packed for shipment.
Fitted to engine bays, hydraulic compartments and access openings, this cover keeps dust and water away from sensitive parts.
The 801144401 cover is produced to the XCMG drawing, so the outline and bolt holes line up with the frame on the first attempt.
A flat, even rim closes against the seal face, so dust, water and debris stay out of the protected compartment.
The coating resists oil, water and wash chemicals, so the panel does not rust through or flake apart in outdoor service.
Correct thickness and folded edges keep the panel stiff, so it does not flex and rub against nearby hoses or wiring.
Because the part matches the OEM number, a fitter installs it straight from the box without drilling, bending or adding spacers.
Correct material stiffness keeps the fixing points intact under vibration, so the cover does not rattle loose on rough ground.
A sound cover also stops dirt and moisture reaching bearings, wiring and hydraulic parts, which protects expensive components.
Keeping a spare cover on the shelf shortens repair time, so a bent or missing panel does not leave internals exposed.
Each lot begins with certified steel sheet or polymer tested for thickness, strength and coating adhesion before forming.
Panels are formed in controlled tooling, so the outline, hole pattern and folded edge stay uniform from batch to batch.
Deburring removes sharp edges from the rim and holes, so the cover does not cut hands, hoses or the seal face during fitting.
Inspectors measure hole spacing, length, width, flatness and finish against a gauge made for this exact part number.
Batch records trace every 801144401 cover to its material lot and production run, so a quality question is settled quickly.
A cover closes an opening in the machine so dust, water and debris cannot reach the parts inside.
A missing or bent cover lets contamination reach bearings, wiring and hydraulic lines, which causes wear and unexpected failure.
The genuine 801144401 keeps the compartment closed, so internal parts stay clean and protected from the environment.
Correct fit avoids both a cover that rattles loose under vibration and one that sits proud and rubs against nearby parts.
A sound cover protects the engine bay, hydraulic compartment and access openings, which keeps service intervals predictable.
The 801144401 cover is installed with a cleaning cloth, a spanner set and a screwdriver during body or service work.
Open the compartment, remove the old cover and clean the frame face so no dirt or old sealant sits under the new panel.
Check the frame and mounting points for cracks, rust or bent metal, since a damaged face will stop the cover sitting flat.
Lift the panel into place, start the bolts by hand and align the holes before tightening any fastener.
Tighten to the torque in the service data, so the cover seals without distorting the panel or crushing the frame face.
Open and close the cover or latch slowly, then check that the rim meets the frame evenly along its whole edge.
At service intervals, look for loose bolts, a bent panel or a worn seal and renew the part before internals are exposed.
Every 801144401 cover is produced in an ISO 9001 and ISO 14001 certified plant with traceability from material to carton.
Incoming material is tested for thickness and strength, and finished covers are gauged for hole spacing, length and flatness.
Each batch is screened for dents, cracks and coating defects, since these flaws let the cover fail or the frame rust.
Post-production checks include visual review, dimensional verification and a trial fit on the XCMG frame fixture.
Sample covers from each batch undergo impact, vibration and salt spray tests to confirm strength and corrosion performance.
Cheap copies often use thin sheet or low-grade polymer that dents, cracks or warps soon after the machine starts working.
A cover with the wrong hole spacing or outline can leave a gap at the frame, rattle loose or rub through a nearby hose.
The genuine 801144401 is made to the XCMG drawing, so outline, holes, thickness and material match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM frames.
Backed by XCMG global quality standards and technical support, this cover performs reliably in harsh conditions.
Choosing the genuine 801144401 cover prevents a small opening from letting dust into bearings or hydraulic components.
A missing cover lets dust and water reach machined surfaces, which wears parts and shortens component life.
A correctly made cover seats firmly, so it does not rattle loose and does not need repeated tightening or replacement.
Reliable covers also keep the engine bay and hydraulics clean, which improves performance and lowers ownership cost.
Service records from construction and mining fleets show genuine XCMG parts cut unplanned downtime.
XCMG produces the 801144401 cover with efficient forming runs that keep production scrap low.
A long service life means fewer replacements, which lowers the material and energy tied to each cover.
Closing compartments prevents oil leaks and contamination, which protects soil, groundwater and internal parts.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 801144401 cover is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each unit is bagged to protect the finish and boxed in a strong carton that guards against dust, damp and crushing.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the panel flat and the edge undamaged until fitting, avoiding the distortion seen in loose storage.
The XCMG Cover 801144401 is a small but important body part on XCMG excavators, closing and protecting internal compartments.
Its accurate size, correct edge form and durable material deliver dependable protection in rain, dust and heat.
By keeping compartments closed, this cover cuts downtime, protects internal parts and extends the life of the assembly.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 801144401 cover for dependable protection and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 801144401 – XCMG Cover – the definitive protective panel for clean, protected compartments on your excavator. Formed to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
