OEM 801100224 The XCMG Fan Pedal 801100224 is a genuine foot-operated control that lets the operator switch the cab cooling fan on and off while working.
Issued under the official part number 801100224, the pedal gives the technician a correctly sized control that matches the floor bracket, pivot pin and switch position it is designed for.
The pad, arm and hinge are formed to the XCMG drawing, so the pedal mounts on the cab floor without drilling or adding spacers.
A spring return lifts the pedal when the operator lifts their foot, so the switch releases cleanly and does not stay engaged.
A non-slip surface and plated frame resist dust, mud and corrosion, so the pedal keeps its grip through wash-down and long outdoor duty.
Every unit is checked for pivot action, spring return, switch travel and surface finish before the batch is packed for shipment.
Fitted to the cab floor beside the travel pedals, this fan pedal lets the operator ventilate the cab with a simple foot movement.
The 801100224 pedal is produced to the XCMG drawing, so the mounting holes and pivot line up with the cab floor on the first attempt.
A non-slip rubber pad gives the operator a firm grip, so the foot does not slip off when the floor is muddy or wet.
The spring return lifts the pedal when the foot is lifted, so the fan switch releases and does not stay engaged.
The plated frame resists water, dust and wash chemicals, so the pedal does not corrode, seize or stain the cab floor.
Because the part matches the OEM number, a fitter installs it straight from the bag without drilling, bending or adding spacers.
Correct pivot size keeps the pedal square, so it moves freely without wobbling on the pin or binding at the bracket.
A sound pedal also keeps the cab fan working, which improves operator comfort on hot or dusty sites.
Keeping a spare pedal on the shelf shortens repair time, so a broken hinge does not leave the fan unusable.
Each lot begins with certified steel sheet and rubber pad stock tested for thickness, hardness and coating adhesion before forming.
Pedals are formed and welded in controlled fixtures, so the outline, hole pattern and arm angle stay uniform from batch to batch.
Deburring removes sharp edges from the frame and holes, so the pedal seats flat and does not cut hands or the floor mat.
Inspectors measure hole spacing, arm length, pad size and pivot bore against a gauge made for this exact part number.
Batch records trace every 801100224 pedal to its material lot and production run, so a quality question is settled quickly.
A fan pedal lets the operator switch the cab fan on and off with a foot, so the hands stay on the controls.
A broken pedal or spring leaves the fan stuck on or off, which drains the battery or leaves the operator in a hot cab.
The genuine 801100224 keeps the switch working, so the operator can ventilate the cab whenever dust or heat builds up.
Correct fit avoids both a pedal that sits too high and trips the operator and one that sits too low and cannot be reached.
A sound pedal protects the fan switch and wiring, which keeps the cab comfortable and extends the life of the assembly.
The 801100224 pedal is installed with a cleaning cloth, a spanner set and a screwdriver during cab service work.
Remove the old pedal, clean the floor bracket and check the switch so no dirt or broken parts sit under the new unit.
Check the bracket and floor for cracks, rust or bent metal, since a damaged face will stop the pedal sitting flat.
Fit the pedal with the correct bolts, start the threads by hand and connect the switch or linkage before tightening.
Tighten to the torque in the service data, so the pedal stays put without crushing the frame or stripping the thread.
Press the pedal slowly and confirm the fan switches on and off, then check that the spring returns the pedal fully.
At service intervals, look for a loose pedal, a worn pad or a weak spring and renew the part before the switch jams.
Every 801100224 pedal is produced in an ISO 9001 and ISO 14001 certified plant with traceability from material to carton.
Incoming material is tested for thickness and hardness, and finished pedals are gauged for holes, arm length and pivot bore.
Each batch is screened for cracks, weld defects and coating flaws, since these defects let the pedal break or jam under foot load.
Post-production checks include visual review, dimensional verification and a trial fit on the XCMG cab floor fixture.
Sample pedals from each batch undergo cycle, load and salt spray tests to confirm spring return and corrosion performance.
Cheap copies often use thin steel or weak springs, so the pedal bends or stays down and keeps the fan running.
A pedal with the wrong hole spacing or arm length can sit too high, foul the floor mat or fail to reach the switch.
The genuine 801100224 is made to the XCMG drawing, so outline, holes, arm and material match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM cab floors.
Backed by XCMG global quality standards and technical support, this fan pedal performs reliably in harsh conditions.
Choosing the genuine 801100224 pedal prevents a stuck switch from draining the battery or burning out the fan motor.
A failed pedal leaves the fan stuck on or off, which wears the motor or leaves the operator in an uncomfortable cab.
A correctly made pedal returns firmly, so it does not need repeated adjustment and does not wear out the switch.
Reliable pedals also keep the cab comfortable, which improves operator focus and lowers overall ownership cost.
Service records from construction and mining fleets show genuine XCMG parts cut unplanned downtime.
XCMG produces the 801100224 pedal with efficient forming and welding runs that keep production scrap low.
A long service life means fewer replacements, which lowers the material and energy tied to each pedal.
Keeping the cab ventilated protects the operator and the controls, which keeps the machine usable for its full life.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 801100224 pedal is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each unit is bagged to protect the finish and boxed in a strong carton that guards against dust, damp and crushing.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the frame and pad undamaged until fitting, avoiding the distortion seen in loose storage.
The XCMG Fan Pedal 801100224 is a small but important cab control on XCMG excavators, letting the operator switch the cooling fan by foot.
Its accurate size, firm spring return and durable finish deliver dependable ventilation control in rain, dust and heat.
By keeping the fan switch working, this pedal cuts downtime, protects the fan motor and keeps the operator comfortable.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 801100224 pedal for dependable fan control and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 801100224 – XCMG Fan Pedal – the definitive foot control for a comfortable, ventilated cab on your excavator. Formed to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
