OEM 800372522 The XCMG Filter Element (800372522) is a genuine OEM precision‑engineered filtration component designed for hydraulic, lubrication, and fuel systems on XCMG articulated dump trucks. This advanced filter element, identified by part number 800372522, ensures the continuous removal of particulate contaminants, water, and degradation by‑products from critical fluid streams, delivering consistently clean fluid, superior component protection, and exceptional durability in the most demanding mining, quarrying, and heavy construction environments worldwide.
Manufactured using high‑efficiency synthetic micro‑glass or cellulose media with a robust perforated steel core, precision‑formed end caps, and integrated bypass valve technology, the 800372522 filter element delivers consistent filtration efficiency (β10 ≥ 200), excellent dirt‑holding capacity, and exceptional resistance to fluid degradation, pressure pulsation, and temperature extremes (-40°C to +120°C). Its precision‑engineered dimensions and sealing interfaces guarantee a perfect, leak‑free fit without modification.
The 800372522 filter element features a high‑strength centre tube that prevents media collapse, a pleated media design that maximises surface area for contaminant capture, and a corrosion‑resistant finish, making it an essential component for maintaining fluid cleanliness, preventing premature wear of pumps, valves, and actuators, and maximising uptime in your ADT fleet.
The 800372522 Filter Element is manufactured with high‑efficiency synthetic micro‑glass media, precision‑pleated to maximise filtration surface area and dirt‑holding capacity while minimising flow restriction across every unit.
Its advanced multi‑layer media construction captures abrasive particulates as small as 10 microns with β10 ≥ 200, preventing them from circulating through hydraulic systems and causing wear to pumps, valves, cylinders, and other precision components.
The integrated bypass valve opens at 2.5 bar to allow fluid flow when the element becomes excessively clogged, ensuring that the system always receives fluid, albeit unfiltered, to prevent cavitation and component starvation.
The high‑strength perforated steel centre tube prevents media collapse under high differential pressure, maintaining filter integrity and ensuring reliable performance even during cold starts and pressure surges.
The epoxy‑bonded end caps provide a secure seal between the media and the centre tube, eliminating bypass paths and ensuring that all fluid passes through the filter media.
In demanding applications such as open‑pit mines, aggregate quarries, and heavy construction sites, the 800372522 delivers reliable, long‑lasting filtration performance for your ADT’s fluid power systems.
The 800372522 filter element is produced using advanced pleating, bonding, and assembly technologies, achieving tight tolerances on media pleat count, end‑cap adhesion, and bypass valve calibration.
The synthetic micro‑glass media is precisely pleated and heat‑bonded to the centre tube and end caps, ensuring uniform flow distribution and preventing media migration or bypass under high differential pressure.
The bypass valve is calibrated on dedicated test equipment to ensure accurate opening pressure, providing reliable protection against excessive pressure drop while maintaining filtration efficiency.
After assembly, each filter element undergoes 100% leak testing, burst pressure testing, and flow‑rate verification to ensure it meets the required performance standards.
Sample units from each production batch are subjected to multi‑pass filtration efficiency testing, dirt‑holding capacity testing, and fatigue testing to confirm long‑term durability and performance.
All materials are RoHS compliant and free from hazardous substances, meeting stringent environmental standards.
Articulated dump trucks operate in some of the harshest environments on earth, with hydraulic and lubricating fluids constantly exposed to dust, water, and thermal stress, making effective filtration essential for component longevity and system reliability.
The 800372522 filter element serves as the primary defence against fluid‑borne contaminants, ensuring that the system’s pumps, valves, and actuators receive clean, contaminant‑free fluid at all times.
A substandard or clogged filter element can allow abrasive particles to circulate through the system, accelerating wear on precision components and leading to catastrophic failure — risks that are eliminated by using genuine XCMG filter elements.
Field data from mining operations shows that ADTs equipped with genuine XCMG filter elements experience 45% fewer hydraulic component failures and a 30% reduction in fluid contamination events, directly improving machine availability and lowering operating costs.
The filter element’s high dirt‑holding capacity and efficient media design allow it to maintain low pressure drop throughout the service interval, ensuring that the system’s pumps do not have to work harder than necessary.
Regular replacement of the filter element at the recommended service interval is essential; any element showing signs of damage, excessive restriction, or media failure should be replaced promptly with genuine 800372522 components.
The 800372522 filter element features a high‑efficiency synthetic micro‑glass media that provides exceptional particle capture efficiency while maintaining low flow resistance, ensuring optimal fluid flow even under high‑load conditions.
The media’s three‑dimensional structure provides a high surface area for particle capture, with a dirt‑holding capacity of ≥ 25 grams, allowing the element to maintain its efficiency throughout the entire service interval.
The high‑strength steel centre tube prevents media collapse under high differential pressure, ensuring that the filter element maintains its structural integrity even during cold‑start conditions when fluid viscosity is highest.
The epoxy‑bonded end caps provide a robust seal that prevents bypass and ensures that all fluid is properly filtered, protecting downstream components from contamination.
The bypass valve is precision‑set to open only when necessary, ensuring that the system maintains adequate flow while still providing maximum filtration under normal conditions.
With proper installation and routine replacement, the 800372522 filter element can provide reliable service for the entire lifespan of the ADT, reducing the need for premature component overhauls.
The 800372522 filter element is specifically designed to fit XCMG’s full range of articulated dump trucks, including the XDA30, XDA40, XDA45, XDA45U, XDA60, and TA30 models, as well as their respective variants and hydraulic/lubrication system configurations.
Its dimensions, sealing interface, and bypass valve setting are identical to the original factory‑fitted component, ensuring a direct, drop‑in replacement without the need for adapters or modifications.
The filter element is compatible with XCMG’s standard hydraulic and lubrication systems, simplifying inventory management and reducing the risk of incorrect filter selection for fleet operators.
Whether used in standard ADT applications or in severe‑duty mining operations, the 800372522 filter element provides consistent filtration performance across all system types, backed by XCMG’s engineering expertise.
For operators with mixed fleets, this filter element offers the assurance of OEM quality and fitment, reducing the risk of mismatched components and system contamination issues.
Always verify the specific application and fluid system requirements for your ADT model to ensure the correct filter element selection.
The 800372522 filter element is designed for quick and simple replacement using standard hand tools, minimising downtime and labour costs during routine fluid and filter changes.
Before installation, carefully clean the filter housing to remove any old gasket material, dirt, or debris that could compromise the seal or contaminate the new element.
Inspect the new element for any signs of damage, deformation, or contamination that may have occurred during storage or transport, and ensure that the sealing surfaces are clean and intact.
Lubricate the sealing O‑ring or gasket with clean system fluid to ensure proper seating and prevent damage during installation, then carefully insert the element into the housing, ensuring it is fully seated.
After installation, start the system and check for any leaks around the filter housing, and verify that the system pressure and flow are within normal operating parameters.
Always replace the filter element at the recommended service interval (typically 500–1000 hours) and whenever the system fluid is changed, to maintain optimal system cleanliness and performance.
Investing in the genuine 800372522 filter element delivers significant long‑term savings by preventing component wear, reducing fluid degradation, and avoiding costly system failures that can result from inadequate filtration.
A single hydraulic pump or valve failure due to contamination can cost over $5,000 in parts, labour, and lost production — a risk that is virtually eliminated with OEM‑quality filtration.
Over a typical 15,000‑hour service life, an ADT’s fluid systems can circulate hundreds of thousands of litres of fluid. The 800372522 filter element’s high efficiency and dirt‑holding capacity ensure consistent fluid cleanliness throughout.
By maintaining fluid cleanliness, the filter element also extends fluid life and reduces the frequency of oil changes, saving on lubricant costs and disposal fees.
Field data from large‑scale mining operations shows that using genuine XCMG filter elements reduces fluid‑related downtime by up to 35%.
The filter element’s robust construction and high‑quality materials ensure it remains serviceable even after years of exposure to harsh conditions, eliminating the need for premature replacement and reducing lifecycle costs.
XCMG is committed to sustainable manufacturing practices, and the 800372522 filter element reflects this through its use of recyclable materials and energy‑efficient production processes.
The filter element’s long service life and high dirt‑holding capacity reduce the frequency of filter changes, minimising waste generation and the environmental impact associated with used filter disposal.
By preventing fluid contamination and component wear, the filter element also helps reduce oil consumption and the release of harmful by‑products, supporting environmental stewardship and regulatory compliance.
The materials used are free from heavy metals and comply with RoHS and REACH regulations, ensuring safe handling and disposal at end‑of‑life.
Choosing genuine XCMG filtration components supports responsible equipment management while delivering superior operational reliability and performance.
The filter element’s robust, simple design allows for easy inspection and replacement, minimising resource consumption and waste generation.
The 800372522 filter element is stocked in XCMG’s regional distribution centres across North America, Europe, Asia, and Australia, ensuring rapid availability to support your maintenance schedules and minimise downtime.
Each filter element is individually packaged in protective anti‑corrosion bags and bulk‑packed in cartons to prevent damage and contamination during transit and warehousing.
For large fleet orders, XCMG offers volume‑based pricing and consolidated shipping options to optimise procurement costs and simplify inventory management.
Real‑time inventory visibility and dedicated supply chain support ensure that urgent requirements are fulfilled with minimal lead times, reducing downtime and keeping your ADT fleet productive.
The robust packaging protects the filter element from corrosion and physical damage during storage, preserving its condition until installation.
With XCMG’s global aftermarket network, you can rely on consistent product quality and availability to keep your fleet running smoothly.
Every 800372522 filter element is manufactured in an ISO 9001 and ISO 14001 certified facility with full material traceability from raw media to finished product.
Incoming filter media is tested for basis weight, thickness, air permeability, and burst strength to ensure it meets the required specifications.
During production, critical dimensions such as media pleat count, end‑cap bond integrity, and bypass valve calibration are continuously monitored using automated inspection systems, and a 100% functional test is performed on every finished filter element.
After assembly, each filter element undergoes a leak test and burst pressure test to verify its structural integrity and sealing performance.
Sample units from each production batch are subjected to multi‑pass filtration efficiency testing, dirt‑holding capacity testing, and temperature cycling to validate long‑term durability and performance.
Only elements that pass all quality checks are released, ensuring that you receive a reliable, high‑performance fluid protection component.
Aftermarket filter elements often use inferior media, imprecise dimensions, or poor bypass valve calibration that lead to premature clogging, media failure, or inadequate filtration efficiency.
The genuine 800372522 is engineered to XCMG’s exacting standards, ensuring correct fit, reliable filtration efficiency, and long‑lasting durability for optimal system protection.
Its superior media quality and precision manufacturing deliver consistent performance, reducing the risk of costly breakdowns and unplanned downtime.
Genuine XCMG parts preserve warranty coverage, maintain equipment resale value, and ensure compatibility with other OEM systems and components.
Backed by XCMG’s global quality standards and technical support, you can trust the performance and reliability of this filter element.
Choose genuine XCMG for uncompromising fluid filtration in the toughest operating conditions.
The XCMG 800372522 Filter Element is an essential fluid protection component for any articulated dump truck, ensuring reliable contaminant removal, system cleanliness, and long service life.
Its precision‑engineered design, high‑efficiency media, and robust construction deliver consistent filtration performance, enabling safe and productive operation in the harshest environments.
By safeguarding fluid systems, this filter element reduces downtime, lowers maintenance costs, and extends machine service life.
Always source genuine XCMG parts from authorised dealers to guarantee authenticity, quality, and performance.
Choose the 800372522 filter element for dependable fluid filtration and lasting operational peace of mind.
Partner with XCMG – your trusted source for heavy equipment filtration components that deliver real value.
OEM 800372522 – XCMG Filter Element – the definitive fluid filtration component for your ADT’s hydraulic and lubrication systems. Engineered for durability, designed for simplicity, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
