OEM 800175461 The XCMG Coolant Fill Hose 800175461 is a genuine OEM coolant fill hose engineered to carry coolant safely from the fill point into the cooling system on XCMG hydraulic excavators.
Identified by part number 800175461, this factory-made coolant fill hose gives technicians a flexible, sealed path for topping up coolant during scheduled service.
It is produced from heat-resistant EPDM rubber, reinforced with synthetic fiber, and covered with a tough outer layer that resists coolant, heat and abrasion.
Exact OEM inner diameter, length and molded bend allow direct replacement without cutting, adding adapters or rerouting the fill line on the machine.
By keeping the coolant fill path sealed and clean, this hose prevents air ingress, stops spillage and protects the cooling system from contamination.
Every unit is dimensionally checked and pressure tested before packing, so the part you receive matches the XCMG drawing specification exactly.
The 800175461 Coolant Fill Hose uses heat-resistant EPDM rubber that stays flexible and sealed when exposed to hot coolant under pressure.
Synthetic fiber reinforcement keeps the hose from ballooning or collapsing when coolant is poured quickly during service work.
The molded shape follows the OEM route, so the hose clears radiator necks, brackets and hot engine parts without rubbing.
A tough outer cover resists abrasion from vibration and frame contact, which is a common cause of coolant seepage on excavators.
Exact inner diameter and length let the original clamps seat correctly, so the hose seals without extra sealant or adapters.
Flexible construction absorbs engine movement, which reduces stress on filler necks, overflow fittings and nearby joints.
Clean coolant delivery also helps the water pump and thermostat work as designed, keeping operating temperatures within the normal range.
Production starts with certified EPDM compound tested for hardness, tensile strength, coolant swell and heat aging before building.
The hose is built on a mandrel that matches the OEM bend path, so the finished part keeps its shape and full inner diameter.
Vulcanization bonds tube, reinforcement and cover into one strong wall, and trimming removes flash from both ends.
Inspectors check inner diameter, length, wall thickness, bend angle and surface quality on samples from every batch.
Batch records let XCMG trace each 800175461 hose back to its compound lot and curing press, so quality questions are resolved quickly.
The coolant fill hose provides a sealed path for adding coolant and for connecting the filler neck to the cooling system or overflow bottle.
A cracked or loose fill hose lets air into the system, which causes overheating, poor heater performance and pump cavitation.
The genuine 800175461 keeps the fill path sealed, so coolant stays inside the system and spillage on hot surfaces is avoided.
Correct routing away from exhaust and turbo heat prevents the hose from hardening and cracking, extending service life.
Stable coolant flow protects the radiator, water pump and cylinder head, which keeps engine performance and uptime predictable.
The 800175461 coolant fill hose installs with hose clamp pliers and standard hand tools during scheduled engine service.
Let the engine cool completely, and place a drain pan under the filler area before loosening any connection.
Loosen the clamps, twist and pull the old hose free, then clean both fittings and check for corrosion or cracked necks.
Slide the new hose onto both fittings without twisting it, and position the clamps behind the bead at each end.
Refill with the specified coolant mix, run the engine to operating temperature, and check for leaks at both connections.
Bleed trapped air from the system, top up to the correct level, and recheck after the first full heat cycle.
During routine maintenance, squeeze the hose to check for softness or cracking, and replace it before it fails on site.
Every 800175461 hose is produced in an ISO 9001 and ISO 14001 certified plant with traceability from compound to packed carton.
Incoming rubber is tested for hardness and coolant swell, and finished hoses are measured for bore, length and bend angle.
During production, curing time, temperature and mandrel condition are monitored so every hose keeps its molded shape.
Post-production checks include visual inspection, dimensional verification and a trial fit on the XCMG coolant fill fixture.
Sample hoses from each batch undergo pressure, heat aging and coolant soak tests to confirm long-term performance.
Low-cost aftermarket coolant hoses often use low-grade rubber that hardens, swells or cracks from heat and coolant additives.
A hose with the wrong bend or diameter can kink after installation, which blocks coolant flow and causes overheating.
The genuine 800175461 is molded to the XCMG drawing, so bore, length, bend path and material match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and maintains compatibility with other OEM components.
Backed by XCMG global quality standards and technical support, this coolant fill hose delivers dependable flow in harsh conditions.
Choosing the genuine 800175461 hose prevents a small coolant weep from turning into an expensive engine repair.
A burst fill hose can drain the cooling system quickly, which overheats the engine and can warp the cylinder head.
Durable rubber and proper reinforcement keep the hose functional across a long service life, reducing replacement frequency.
Reliable coolant delivery also extends radiator, pump and seal life, lowering the total cost of ownership for fleet operators.
Fleet records from construction and mining operations show genuine XCMG engine parts cut engine-related downtime.
XCMG applies sustainable manufacturing to the 800175461 hose through efficient mandrel building and reduced material waste.
The long service life of the hose reduces material consumption and lowers the environmental footprint of replacement parts.
Preventing coolant leaks protects soil and groundwater and supports compliance on environmentally sensitive sites.
Rubber materials in this component comply with RoHS and REACH rules for safe handling and responsible disposal.
The 800175461 coolant fill hose is held in XCMG regional distribution centres across North America, Europe, Asia and Australia.
Each hose is sleeved and packed in a sturdy carton that protects it from kinking, dust and ultraviolet exposure in transit.
For fleet-wide orders, XCMG provides volume pricing and consolidated freight options that simplify planning and reduce cost.
Real-time stock visibility and dedicated supply chain support help fill urgent requests quickly, shortening downtime on active projects.
Robust packaging preserves factory condition until installation, preventing the deformation and cracking common in stored hoses.
The XCMG Coolant Fill Hose 800175461 is a vital connection component for XCMG excavators, linking the filler neck and the cooling system.
Its heat-resistant EPDM tube, reinforcement and molded shape deliver dependable flow in hot, wet and dusty environments.
By preventing kinks and leaks, this coolant fill hose reduces downtime, lowers maintenance costs and extends engine service life.
Always purchase genuine XCMG parts from authorised dealers to guarantee authenticity, quality and performance for your equipment fleet.
Choose the 800175461 coolant fill hose for dependable connections and lasting operational peace of mind.
Partner with XCMG, your trusted source for heavy equipment engine and hydraulic components that deliver real value.
OEM 800175461 – XCMG Coolant Fill Hose – the definitive coolant fill hose solution for your excavator engine cooling circuit. Engineered for heat and coolant resistance, designed for exact fitment, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
