OEM 800175460 The XCMG Engine Oil Fill Hose 800175460 is a genuine OEM oil fill hose engineered to carry engine oil safely from the fill point into the crankcase on XCMG hydraulic excavators.
Identified by part number 800175460, this factory-made engine oil fill hose gives technicians a flexible, sealed path for adding oil during scheduled service.
It is produced from oil-resistant EPDM or NBR rubber, reinforced with synthetic fiber, and covered with a tough outer layer that resists oil, heat, and abrasion.
Exact OEM inner diameter, length, and molded bend allow direct replacement without cutting, adding adapters, or rerouting the fill line.
By keeping the oil fill path sealed and clean, this hose prevents dirt ingress and protects the engine from contamination during oil changes.
The 800175460 Engine Oil Fill Hose uses oil-resistant EPDM or NBR rubber that stays flexible and sealed when exposed to hot engine oil.
Synthetic fiber reinforcement keeps the hose from ballooning or collapsing when oil is poured quickly during service.
The molded shape follows the OEM route, so the hose clears rocker covers, brackets, and hot engine parts without rubbing.
A tough outer cover resists abrasion from vibration and frame contact, which is a common cause of oil seepage on excavators.
Exact inner diameter and length let the original clamps seat correctly, so the hose seals without extra sealant or adapters.
Flexible construction absorbs engine movement, which reduces stress on filler necks, breather fittings, and nearby joints.
Production starts with certified EPDM or NBR compound tested for hardness, tensile strength, oil swell, and heat aging before building.
The hose is built on a mandrel that matches the OEM bend path, so the finished part keeps its shape and full inner diameter.
Vulcanization bonds tube, reinforcement, and cover into one strong wall, and trimming removes flash from both ends.
Inspectors check inner diameter, length, wall thickness, bend angle, and surface quality on samples from every batch.
Batch records let XCMG trace each 800175460 hose back to its compound lot and curing press, so quality questions are resolved quickly.
The engine oil fill hose provides a sealed path for adding oil and for connecting the filler neck to the crankcase or breather system.
A cracked or loose fill hose lets dirt enter the oil, which accelerates wear on bearings, pistons, and the injection pump.
The genuine 800175460 keeps the fill path sealed, so contaminants stay out and the oil stays inside the engine during service.
Correct routing away from heat sources prevents the hose from hardening and cracking, which extends service life and avoids leaks.
Clean oil and stable lubrication protect the engine, which keeps hydraulic performance and machine uptime predictable.
The 800175460 engine oil fill hose installs with hose clamp pliers and standard hand tools during scheduled engine service.
Let the engine cool completely, and place a drain pan under the filler area before loosening any connection.
Loosen the clamps, twist and pull the old hose free, then clean both fittings and check for corrosion or cracked necks.
Slide the new hose onto both fittings without twisting it, and position the clamps behind the bead at each end.
Refill with the specified engine oil, run the engine to operating temperature, and check for leaks at both connections.
During routine maintenance, squeeze the hose to check for softness or cracking, and replace it before it bursts on site.
Every 800175460 hose is produced in an ISO 9001 and ISO 14001 certified plant with traceability from compound to packed carton.
Incoming rubber is tested for hardness and oil swell, and finished hoses are measured for bore, length, and bend angle.
During production, curing time, temperature, and mandrel condition are monitored so every hose keeps its molded shape.
Post-production checks include visual inspection, dimensional verification, and a trial fit on the XCMG oil fill fixture.
Sample hoses from each batch undergo pressure, heat aging, and oil soak tests to confirm long-term performance.
Low-cost aftermarket oil fill hoses often use low-grade rubber that hardens, swells, or cracks from heat and oil additives.
A hose with the wrong bend or diameter can kink after installation, which blocks oil flow and causes messy refills.
The genuine 800175460 is molded to the XCMG drawing, so bore, length, bend path, and material match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value, and maintains compatibility with other OEM components.
Backed by XCMG global quality standards and technical support, this engine oil fill hose delivers dependable flow in harsh conditions.
Choosing the genuine 800175460 hose prevents a small oil weep from turning into an expensive engine repair.
A burst fill hose can drain oil quickly, which starves bearings and damages internal engine parts within minutes.
Durable rubber and proper reinforcement keep the hose functional across a long service life, reducing replacement frequency.
Reliable oil delivery also extends engine, seal, and oil life, lowering the total cost of ownership for fleet operators.
Fleet records from construction and mining operations show genuine XCMG engine parts cut engine-related downtime.
XCMG applies sustainable manufacturing to the 800175460 hose through efficient mandrel building and reduced material waste.
The long service life of the hose reduces material consumption and lowers the environmental footprint of replacement parts.
Preventing oil leaks protects soil and groundwater and supports compliance on environmentally sensitive sites.
Rubber materials in this component comply with RoHS and REACH rules for safe handling and responsible disposal.
The 800175460 engine oil fill hose is held in XCMG regional distribution centres across North America, Europe, Asia, and Australia.
Each hose is sleeved and packed in a sturdy carton that protects it from kinking, dust, and ultraviolet exposure in transit.
For fleet-wide orders, XCMG provides volume pricing and consolidated freight options that simplify planning and reduce cost.
Real-time stock visibility and dedicated supply chain support help fill urgent requests quickly, shortening downtime on active projects.
Robust packaging preserves factory condition until installation, preventing the deformation and cracking common in stored hoses.
The XCMG Engine Oil Fill Hose 800175460 is a vital connection component for XCMG excavators, linking the filler neck and breather system.
Its oil-resistant EPDM or NBR tube, reinforcement, and molded shape deliver dependable flow in hot, wet, and dusty environments.
By preventing kinks and leaks, this engine oil fill hose reduces downtime, lowers maintenance costs, and extends engine service life.
Always purchase genuine XCMG parts from authorised dealers to guarantee authenticity, quality, and performance for your equipment fleet.
Choose the 800175460 engine oil fill hose for dependable connections and lasting operational peace of mind.
Partner with XCMG, your trusted source for heavy equipment engine and hydraulic components that deliver real value.
OEM 800175460 – XCMG Engine Oil Fill Hose – the definitive engine oil fill hose solution for your excavator engine service circuit. Engineered for oil resistance, designed for exact fitment, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
