OEM 800167147 The XCMG Lubricating Oil Pump Cover 800167147 is a genuine OEM cover engineered to seal and protect the engine lubricating oil pump on XCMG excavators.
Identified by part number 800167147, this cover closes the pump housing and holds the drive shaft, gears and bearings in correct alignment.
It is machined from high-strength cast iron and finished with precise mating surfaces that prevent oil leakage under continuous pressure.
Exact OEM bolt hole spacing, flange geometry and bore dimensions guarantee a direct replacement without modification during overhaul.
By sealing the pump tightly, this cover maintains stable oil pressure and protects the engine from lubrication failure and premature wear.
The 800167147 Lubricating Oil Pump Cover is machined from high-strength cast iron for excellent rigidity and long-term dimensional stability.
Its ground mating face provides a tight seal against the pump body, preventing oil leakage and maintaining stable lubrication pressure.
Exact OEM bolt hole spacing and flange geometry allow a direct replacement without modification, so the cover fits correctly.
The precision bearing bore holds the drive shaft and gears in correct alignment, reducing vibration and wear inside the pump.
An anti-rust coating protects the casting from corrosion during storage and operation in humid or dusty environments.
Because the cover is a genuine XCMG component, it preserves warranty coverage and maintains compatibility with other OEM parts.
Production starts with certified cast iron blanks that are checked for chemical composition, hardness and internal soundness before release.
Covers are machined on computer-controlled centres that hold flange flatness, bolt hole positions and bore diameters to exact tolerances.
Mating surfaces are ground and inspected for flatness and surface finish to guarantee a leak-free seal under oil pressure.
After finishing, every cover is checked for dimensions, bore roundness and coating quality before packing.
Batch records let XCMG trace each 800167147 cover back to its raw material lots, so any quality issue can be identified quickly.
A lubricating oil pump cover closes the pump housing and keeps the internal gears, shaft and bearings correctly positioned.
The 800167147 cover maintains a tight seal at both low and high engine speeds, keeping oil pressure stable and consistent.
Stable oil pressure ensures that bearings, pistons and turbochargers receive consistent lubrication, reducing wear and heat.
By preventing oil leakage, the cover also reduces oil consumption and keeps the engine bay clean and safe.
When the cover works correctly, the pump runs cooler and more efficiently, saving fuel and repair costs over time.
Inspect the cover during engine overhaul for cracks, gasket damage or bore wear, and replace any worn unit with a genuine 800167147 cover.
The 800167147 Lubricating Oil Pump Cover installs with standard hand tools during engine overhaul or pump repair.
Park the excavator on firm level ground, shut down the engine, and allow the lubricating system to cool and drain.
Remove the oil pump assembly, take off the old cover, inspect the housing and gears for wear, and clean all mating surfaces.
Fit a new gasket or O-ring, position the cover on the pump body, and align the bolt holes carefully.
Install the mounting bolts by hand, then tighten them evenly in a cross pattern to the specified torque value.
Refill the engine with the correct lubricating oil, start at low idle, and check for leaks and oil pressure before returning to work.
Choosing the genuine 800167147 Lubricating Oil Pump Cover pays back over time by preventing oil leaks and pump failure.
A cracked or warped cover can cause loss of oil pressure, leading to seized bearings and costly engine repairs.
The durable construction of this cover keeps sealing performance consistent over a long service life, reducing replacement frequency.
Reliable sealing also extends the life of connected components such as bearings, pistons, turbochargers and the engine block.
Field data from large construction and mining fleets shows genuine XCMG pump components reduce lubrication-related downtime significantly.
The cover remains serviceable for thousands of hours under normal operating conditions, removing the need for premature replacement and lowering inventory costs.
XCMG applies sustainable manufacturing principles to the 800167147 cover through recyclable cast iron content and energy-efficient processes.
The extended service life, often exceeding 10,000 hours in normal conditions, cuts material waste and lowers the environmental footprint.
Preventing oil leakage also avoids secondary damage and fluid loss, which supports regulatory compliance and responsible site management.
Cast iron materials are free from restricted substances and comply with RoHS and REACH rules for safe handling and disposal.
Selecting genuine XCMG pump components supports responsible equipment management while delivering superior operational reliability.
The precision-engineered design allows long, dependable service, which minimises resource consumption across the working life of the machine.
The 800167147 Lubricating Oil Pump Cover is stocked in XCMG regional distribution centres across North America, Europe, Asia and Australia.
Every unit is wrapped with anti-rust protection inside a fitted carton, shielding it from impact and moisture during transit.
For fleet-wide orders, XCMG offers volume pricing and consolidated freight options that reduce procurement costs and simplify inventory planning.
Real-time stock visibility and dedicated supply chain support help fulfil urgent requests quickly, shortening downtime and keeping excavators productive.
Sturdy packaging preserves the factory condition of the cover until installation, preventing damage that can occur with poorly stored spare parts.
With the XCMG global aftermarket network behind it, you can depend on consistent quality and availability to keep your fleet at full capacity.
Every 800167147 Lubricating Oil Pump Cover comes from an ISO 9001 and ISO 14001 certified plant with full material traceability from raw stock to packed product.
Incoming cast iron blanks are tested for chemical composition, hardness and internal soundness before release to production lines.
During manufacturing, flange flatness, bolt hole positions, bore diameters and surface finish are monitored continuously by trained operators.
Post-production checks include dimensional verification, flatness testing and pressure testing to confirm each cover meets specification.
Sample covers from each batch undergo pressure cycling and thermal cycling to prove long-term durability and stable sealing performance.
Only covers that pass every quality gate are released, so you receive a dependable, high-performance pump housing component every time.
Cheap aftermarket covers often use lower-grade castings, poor machining or inaccurate bolt patterns that lead to leaks and rapid failure.
Those shortcuts lead to oil pressure loss, gear misalignment and poor reliability in demanding construction and mining conditions.
The genuine 800167147 is built to exacting XCMG standards, delivering correct fit, reliable sealing and durable performance in the field.
Its robust cast iron body and precise machining provide consistent results, lowering the chance of expensive engine failures and machine downtime.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and maintains compatibility with other OEM systems on the machine.
Backed by XCMG global quality standards and technical support, this lubricating oil pump cover offers performance you can rely on in the harshest conditions.
The XCMG 800167147 Lubricating Oil Pump Cover is a vital engine component for XCMG hydraulic excavators, sealing the oil pump in demanding conditions.
Its precision-engineered design, robust cast iron construction and fine machining deliver dependable performance in harsh environments.
By maintaining stable oil pressure and preventing leaks, this cover reduces downtime, lowers maintenance costs and extends machine service life.
Always purchase genuine XCMG parts from authorised dealers to guarantee authenticity, quality and performance for your equipment fleet.
Choose the 800167147 Lubricating Oil Pump Cover for dependable engine lubrication and lasting operational peace of mind.
Partner with XCMG, your trusted source for heavy equipment engine components that deliver real value.
OEM 800167147 – XCMG Lubricating Oil Pump Cover – the definitive pump housing seal solution for your excavator engine. Engineered for durability, designed for reliable oil containment, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
