OEM 800163890 The XCMG Clamp 800163890 is a genuine OEM hose clamp engineered to secure hydraulic and cooling lines firmly on XCMG hydraulic excavators.
Identified by part number 800163890, this factory-built clamp holds hoses and pipes against the machine frame so they stay in their designed routing.
It is produced from high-strength steel strip, precision-formed and coated with a protective finish that resists rust, mud, and oil exposure.
Exact OEM diameter, band width, and mounting hole spacing allow direct replacement without drilling, bending, or adding spacers on site.
By holding lines rigid and correctly spaced, this clamp reduces rubbing, vibration damage, and the risk of sudden hose failure.
The 800163890 Clamp is stamped from high-strength steel strip that resists bending, stretching, and fatigue under constant machine vibration.
Precision-formed clamping radii hold hoses evenly, so the cover is not crushed and the internal reinforcement stays undamaged.
Accurate mounting holes line up with the XCMG frame pattern, which allows fast bolt-on installation without drilling or slotting.
A protective coating fights rust and corrosion, extending service life in wet, muddy, coastal, and high-humidity work environments.
The clamp keeps hoses clear of hot surfaces and sharp edges, reducing abrasion that leads to wire exposure and burst failure.
Correct spacing also supports proper bend radius, which keeps flow unrestricted and prevents kinks that raise oil temperature.
Production starts with certified steel strip checked for thickness, width, and material grade before it reaches the stamping press.
Progressive dies cut and form each clamp to the XCMG drawing, keeping hole spacing, band width, and radius consistent across the batch.
Edges are deburred so the clamp will not cut into hose covers or injure technicians during installation and routine inspection.
After forming, parts are cleaned and coated, then inspected for coating thickness, hole position, and surface defects.
Batch records let XCMG trace every 800163890 clamp back to its steel coil and production shift, so quality questions are resolved quickly.
A hose clamp looks simple, but it controls how hydraulic lines behave under pressure pulses, engine vibration, and machine movement.
When a clamp is missing or loose, a hose can swing, rub the frame, and wear through its cover within a short period of operation.
The genuine 800163890 holds each line at the intended position, so the hose keeps its designed bend radius and flow path.
Rigid support also reduces vibration transfer into fittings and seals, lowering the risk of fatigue cracks and weeping joints.
Stable routing keeps cycle times predictable and helps prevent the pressure loss that comes from a pinched or kinked hose.
The 800163890 Clamp installs with standard hand tools, keeping downtime and labour costs low during scheduled service.
Park the excavator on firm level ground, lower the attachment, release hydraulic pressure, and lock out the machine before starting work.
Clean the hose and mounting area, then inspect the hose cover for cuts, bulges, or exposed wire before fitting the new clamp.
Position the clamp around the hose at the original location, align the mounting holes, and insert the bolts by hand first.
Tighten the bolts evenly to the torque value in the XCMG workshop manual, avoiding over-tightening that could crush the hose.
Start the engine at low idle, check that the hose does not rub or vibrate, and confirm the clamp holds the line firmly in place.
During routine maintenance, check clamps for corrosion, looseness, and missing units, and replace any damaged clamp promptly.
Every 800163890 clamp is produced in an ISO 9001 and ISO 14001 certified facility with traceability from steel coil to packed carton.
Incoming steel is tested for thickness and grade, and finished clamps are measured for hole spacing, band width, and radius.
During production, inspectors check die wear and part dimensions at set intervals to keep every clamp inside drawing tolerance.
Post-production checks include visual inspection, coating thickness measurement, and a fit test against a routing fixture.
Sample clamps from each batch undergo vibration and salt spray testing to confirm they hold force and resist corrosion in the field.
Cheap aftermarket clamps often use thin steel, weak coatings, or rough edges that cut hoses and rust through in a short time.
The genuine 800163890 is built to exacting XCMG standards, giving correct fit, reliable clamping force, and long service life.
Its accurate forming and protective finish lower the risk of hose abrasion, vibration damage, and unexpected hydraulic downtime.
Genuine XCMG parts also preserve warranty coverage, protect resale value, and stay compatible with other OEM components.
Backed by XCMG global quality standards and technical support, this clamp delivers dependable performance in harsh conditions.
Choosing the genuine 800163890 clamp prevents small hose support problems from growing into expensive hydraulic failures.
A missing clamp can let a hose rub through its cover, exposing wire and causing a sudden oil leak that stops the machine.
Durable steel and proper coating keep clamping force consistent across a long service life, reducing replacement frequency.
Reliable hose support also extends the life of hoses, seals, and fittings, lowering the total cost of ownership for fleet owners.
Fleet records from construction and mining operations show genuine XCMG clamps help cut hose-related downtime hours.
XCMG applies sustainable manufacturing to the 800163890 clamp through recyclable steel content and efficient stamping processes.
The long service life of the clamp reduces material waste and lowers the environmental footprint of replacement parts over time.
Preventing hose abrasion and oil leaks protects soil and groundwater and supports compliance on sensitive job sites.
Steel and coating materials in this component meet RoHS and REACH rules for safe handling and responsible disposal.
The 800163890 Clamp is held in XCMG regional distribution centres across North America, Europe, Asia, and Australia.
Each unit is bagged and packed in a sturdy carton that shields it from moisture, dust, and impact during transport and storage.
For fleet-wide orders, XCMG provides volume pricing and consolidated freight options that simplify planning and reduce cost.
Real-time stock visibility and dedicated supply chain support help fill urgent requests quickly, shortening downtime on active projects.
Robust packaging preserves factory condition until installation, preventing the coating damage and bending common in stored spares.
The XCMG 800163890 Clamp is a vital support component for XCMG excavators, holding hydraulic and cooling lines securely in demanding conditions.
Its high-strength steel body, accurate forming, and protective coating deliver dependable performance in hot, wet, and dusty environments.
By preventing hose abrasion and vibration damage, this clamp reduces downtime, lowers maintenance costs, and extends machine service life.
Always purchase genuine XCMG parts from authorised dealers to guarantee authenticity, quality, and performance for your equipment fleet.
Choose the 800163890 Clamp for dependable hose support and lasting operational peace of mind.
Partner with XCMG, your trusted source for heavy equipment hydraulic and structural components that deliver real value.
OEM 800163890 – XCMG Clamp – the definitive hydraulic hose clamp solution for your excavator line supports. Engineered for durability, designed for exact fitment, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
