OEM 800162313 The XCMG Dust Collection Cup Clamp 800162313 is a genuine OEM clamp engineered to secure the dust collection cup on XCMG hydraulic excavators.
Identified by part number 800162313, this clamp holds the dust cup tightly to the air cleaner housing, preventing unfiltered air from entering the engine.
It is manufactured from high-strength steel with a corrosion-resistant coating that withstands vibration, dust and temperature changes.
Exact OEM diameter, band width and locking geometry guarantee a direct replacement without modification during repair.
By locking the cup firmly in place, this clamp protects the engine from dust and extends the service life of the air intake system.
The 800162313 Dust Collection Cup Clamp is made from high-strength steel that resists bending and deformation under vibration.
Its T-bolt design with a nylon lock nut holds the cup firmly without loosening, even on rough ground and continuous operation.
Exact OEM clamping diameter and band width allow a direct replacement without modification, so the clamp fits correctly.
The clamp seals the dust cup tightly against the air cleaner, preventing dust from bypassing the filter and entering the engine.
A zinc-plated finish protects the steel from rust and chemical attack, extending service life in dusty and humid environments.
Because the clamp is a genuine XCMG component, it preserves warranty coverage and maintains compatibility with other OEM parts.
Production starts with certified steel strip that is checked for thickness, hardness and tensile strength before release.
Clamps are stamped, formed and threaded on computer-controlled machines that hold dimensions and angles to exact tolerances.
After forming, each clamp is deburred, zinc plated and inspected for thread quality, band flatness and coating thickness.
Batch records let XCMG trace each 800162313 clamp back to its raw material lots, so any quality issue can be identified quickly.
Sample clamps from each batch undergo tightening torque testing and salt spray testing to prove long-term durability and stable performance.
A dust collection cup clamp holds the dust cup tightly to the air cleaner housing so dust cannot bypass the filter.
The 800162313 clamp maintains consistent clamping force at both low and high engine speeds, keeping the joint sealed.
A tight seal protects the engine from abrasive dust that would wear pistons, rings and turbocharger blades.
By keeping the dust cup in place, the clamp also prevents the cup from falling off during rough operation and causing air leaks.
When the clamp works correctly, the air intake system stays clean and the engine runs efficiently, saving fuel and repair costs.
Inspect the clamp during routine service for corrosion, thread damage or loss of tension, and replace any worn unit with a genuine 800162313 clamp.
The 800162313 Dust Collection Cup Clamp installs with standard hand tools, keeping downtime and labour costs low.
Park the excavator on firm level ground, shut down the engine, and allow the air intake system to cool.
Remove the old clamp, inspect the dust cup and air cleaner housing for damage, and clean all mating surfaces.
Fit the new clamp around the cup and housing, insert the T-bolt, and hand-tighten the lock nut.
Tighten the clamp to the specified torque, then check that the cup is seated correctly and the clamp is secure.
Start the engine at low idle, check for air leaks or unusual noise, and run through full function cycles before returning to work.
Choosing the genuine 800162313 Dust Collection Cup Clamp pays back over time by preventing dust ingestion and engine wear.
A loose or broken clamp can allow dust to bypass the filter, causing piston wear, turbo damage and costly repairs.
The durable construction of this clamp keeps clamping force consistent over a long service life, reducing replacement frequency.
Reliable sealing also extends the life of connected components such as the air filter, turbocharger and engine block.
Field data from large construction and mining fleets shows genuine XCMG intake components reduce dust-related downtime significantly.
The clamp remains serviceable for years under normal operating conditions, removing the need for premature replacement and lowering inventory costs.
XCMG applies sustainable manufacturing principles to the 800162313 clamp through recyclable steel content and energy-efficient processes.
The extended service life, often exceeding 10,000 hours in normal conditions, cuts material waste and lowers the environmental footprint.
Preventing dust ingestion also avoids secondary engine damage and excess fuel consumption, which supports regulatory compliance.
Steel materials are free from restricted substances and comply with RoHS and REACH rules for safe handling and disposal.
Selecting genuine XCMG intake components supports responsible equipment management while delivering superior operational reliability.
The precision-engineered design allows long, dependable service, which minimises resource consumption across the working life of the machine.
The 800162313 Dust Collection Cup Clamp is stocked in XCMG regional distribution centres across North America, Europe, Asia and Australia.
Every unit is wrapped with anti-rust protection inside a fitted carton, shielding it from impact and moisture during transit.
For fleet-wide orders, XCMG offers volume pricing and consolidated freight options that reduce procurement costs and simplify inventory planning.
Real-time stock visibility and dedicated supply chain support help fulfil urgent requests quickly, shortening downtime and keeping excavators productive.
Sturdy packaging preserves the factory condition of the clamp until installation, preventing damage that can occur with poorly stored spare parts.
With the XCMG global aftermarket network behind it, you can depend on consistent quality and availability to keep your fleet at full capacity.
Every 800162313 Dust Collection Cup Clamp comes from an ISO 9001 and ISO 14001 certified plant with full material traceability.
Incoming steel strip is tested for chemical composition, hardness and tensile strength before release to production lines.
During manufacturing, band dimensions, thread quality, lock nut torque and coating thickness are monitored continuously by trained operators.
Post-production checks include dimensional verification, tightening torque testing and salt spray testing to confirm each clamp meets specification.
Sample clamps from each batch undergo vibration testing and thermal cycling to prove long-term durability and stable clamping performance.
Only clamps that pass every quality gate are released, so you receive a dependable, high-performance intake component every time.
Cheap aftermarket clamps often use lower-grade steel, thinner bands or poor lock nuts that lead to loosening and rapid failure.
Those shortcuts lead to dust ingestion, engine wear and unreliable performance in demanding construction and mining conditions.
The genuine 800162313 is built to exacting XCMG standards, delivering correct fit, reliable clamping and durable performance in the field.
Its robust steel band and lock nut provide consistent results, lowering the chance of expensive engine failures and machine downtime.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and maintains compatibility with other OEM systems on the machine.
Backed by XCMG global quality standards and technical support, this dust collection cup clamp offers performance you can rely on in the harshest conditions.
The XCMG 800162313 Dust Collection Cup Clamp is a vital intake component for XCMG hydraulic excavators, securing the dust cup in demanding conditions.
Its precision-engineered design, robust steel construction and zinc plating deliver dependable performance in harsh environments.
By sealing the dust cup tightly and preventing air leaks, this clamp reduces downtime, lowers maintenance costs and extends machine service life.
Always purchase genuine XCMG parts from authorised dealers to guarantee authenticity, quality and performance for your equipment fleet.
Choose the 800162313 Dust Collection Cup Clamp for dependable dust sealing and lasting operational peace of mind.
Partner with XCMG, your trusted source for heavy equipment intake components that deliver real value.
OEM 800162313 – XCMG Dust Collection Cup Clamp – the definitive dust cup sealing solution for your excavator air intake system. Engineered for durability, designed for reliable clamping, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
