Tail Light Inner Mounting Plate
Внутренняя монтажная пластина заднего фонаря
Placa de montaje interna de luz trasera
The 332115580 Tail Light Inner Mounting Plate is a precision‑fabricated bracket designed to provide a secure and rigid mounting foundation for the inner tail light assembly on XCMG articulated dump trucks. This essential component ensures that the tail light remains firmly positioned, maintaining correct visibility and alignment for safe vehicle operation in low‑light conditions. Manufactured from high‑strength carbon steel with a corrosion‑resistant zinc‑nickel plating and a durable powder‑coat finish, the 332115580 tail light inner mounting plate delivers exceptional strength, fatigue resistance, and long‑term durability, making it an indispensable part for preserving rear lighting integrity and road safety in the most demanding mining, quarrying, and heavy construction environments.
The 332115580 Tail Light Inner Mounting Plate is a precision‑fabricated bracket designed to provide a secure and rigid mounting foundation for the inner tail light assembly on XCMG articulated dump trucks.
This essential component ensures that the tail light remains firmly positioned, maintaining correct visibility and alignment for safe vehicle operation in low‑light conditions.
The tail light is a critical safety feature, and its mounting must be absolutely secure to prevent vibration‑induced loosening or misalignment that could compromise the effectiveness of the vehicle’s rear lighting.
The 332115580 plate is engineered to provide a stable, rigid platform that holds the tail light assembly firmly against the vehicle’s rear structure, absorbing road shocks and vibrations.
Manufactured from high‑strength carbon steel with a corrosion‑resistant zinc‑nickel plating and a durable powder‑coat finish, this plate delivers exceptional strength, fatigue resistance, and long‑term durability.
This component is a direct OEM replacement, restoring original tail light positioning and stability after damage or wear, ensuring that the vehicle remains safe and compliant with road safety regulations.
The 332115580 Tail Light Inner Mounting Plate is essential for ensuring the reliability and visibility of the vehicle’s rear lighting system.
Tail lights are vital for communicating the vehicle’s presence, direction, and braking intentions to other road users, especially in poor visibility conditions such as dust, fog, or darkness.
A loose or misaligned tail light can result in reduced visibility, confusing signals, or complete lamp failure, increasing the risk of rear‑end collisions and accidents.
The mounting plate eliminates movement by providing a rigid, positive lock that holds the tail light securely in its adjusted position, even when the vehicle traverses rough terrain.
By ensuring that the tail light remains correctly aligned and free from vibration, this plate directly contributes to safer operation and helps prevent costly accidents.
The 332115580 Tail Light Inner Mounting Plate features a carefully engineered design that balances strength, adjustability, and ease of installation.
The plate is laser‑cut from high‑strength steel and then formed on a CNC press brake to achieve the precise contours required for a perfect fit against the rear structure.
Reinforcement ribs and embossed stiffening patterns are integrated into the plate’s surface, increasing its bending stiffness and resistance to deformation under vibration.
Four precision‑located mounting holes (10.5 mm diameter) on the chassis side allow for secure attachment to the vehicle structure using M10 bolts.
Two slotted holes (6.5 mm diameter) on the lamp side allow for fine adjustment of the tail light position, ensuring optimal alignment with the vehicle’s rear profile and other lighting elements.
The plate’s edges are deburred and radiused to prevent injury during handling and to protect the tail light wiring and connectors from chafing.
All fasteners and mounting points are designed to be accessible with standard tools, making installation and removal straightforward and efficient.
The 332115580 Tail Light Inner Mounting Plate is protected by a dual‑layer coating system that ensures exceptional resistance to corrosion and mechanical wear.
The base layer is a zinc‑nickel electroplating that provides cathodic protection and offers over 500 hours of salt spray resistance (ASTM B117), far exceeding standard zinc plating.
The top coat is a black powder coating that is baked on to form a tough, abrasion‑resistant finish. This coating provides excellent resistance to stone chipping, UV degradation, and chemical exposure.
The combination of these coatings ensures that the mounting plate retains its protective properties and appearance even after years of service in aggressive mining and construction environments.
The black finish also blends seamlessly with the vehicle’s rear structure, maintaining a professional and uniform appearance.
The 332115580 Tail Light Inner Mounting Plate is fabricated from premium Q345B carbon steel, a material that offers an excellent balance of strength, toughness, and weldability.
Q345B provides a minimum yield strength of 345 MPa and excellent impact toughness at low temperatures, ensuring reliable performance in cold climates.
The material’s low carbon equivalent ensures good formability and weldability, making it suitable for the laser‑cutting and forming processes used in the plate’s manufacture.
Each plate is produced in ISO 9001 and ISO 14001 certified facilities, with strict process controls at every stage – from raw material verification to final inspection.
The chemical composition is verified using spectrometer analysis, ensuring it meets the specified requirements for carbon, manganese, silicon, and other alloying elements.
Dimensional accuracy is verified using precision measurement tools, with critical hole positions, hole diameters, and flatness checked against the engineering drawings to ensure a perfect fit.
The result is a mounting plate that delivers consistent, reliable performance, with a service life that matches or exceeds that of the original equipment.
The 332115580 Tail Light Inner Mounting Plate is a critical component for ensuring the overall safety and operational efficiency of XCMG articulated dump trucks.
The tail light is the primary source of rearward visibility for other road users, and any failure of the mounting can result in a loss of lighting, increasing the risk of collision with following vehicles or equipment.
A damaged or worn plate can allow the tail light to vibrate excessively, causing the bulbs to fail prematurely or the lens to crack, making it difficult to see clearly.
The 332115580 plate prevents these failures by providing a robust, fatigue‑resistant mounting that withstands the constant shocks and vibrations of off‑road operation.
Regular inspection of the tail light mounting plate is recommended during routine maintenance to check for signs of corrosion, cracking, or loosening of fasteners. Any damaged plates should be replaced immediately.
Using a genuine XCMG 332115580 plate ensures that the replacement part meets the original design specifications, providing the intended level of support and stability.
The 332115580 Tail Light Inner Mounting Plate is specifically designed for use in XCMG articulated dump trucks, including the XDA30, XDA40, XDA45, XDA45U, XDA60, and TA30 series models.
These vehicles are deployed in a wide range of demanding applications, including open‑pit mining, quarrying, heavy construction, water conservancy, harbour operations, and large‑scale earthmoving projects.
The plate is mounted on the inner side of the rear chassis, providing a secure base for the tail light assembly, ensuring that it is correctly oriented and protected.
Beyond articulated dump trucks, this plate can also be used in other XCMG equipment that shares similar tail light mounting configurations, such as wheel loaders, excavators, and motor graders.
The plate’s standard mounting hole pattern and adjustable slots make it a versatile replacement part for a wide range of heavy machinery, offering flexibility for maintenance and repair.
When replacing a worn or damaged plate, using the genuine 332115580 part ensures correct fitment, material strength, and coating quality, safeguarding the tail light and the safety of the operator.
It is always recommended to inspect the tail light housing and wiring when installing a new plate, and to use new fasteners to ensure a secure installation.
Installing the 332115580 Tail Light Inner Mounting Plate is a straightforward process that can be completed with basic hand tools, minimizing downtime and installation effort.
Before installation, thoroughly clean the mounting surface on the rear chassis to remove any dirt, rust, or debris that could affect the plate’s seating or alignment.
Position the plate against the mounting area, aligning the four 10.5 mm holes with the corresponding threaded holes or studs on the chassis.
Insert the M10 bolts and hand‑tighten them to engage the threads. Then, using a torque wrench, tighten the bolts to the recommended torque of 40–50 N·m, following a diagonal pattern to ensure even clamping pressure.
Once the plate is securely attached, mount the tail light assembly onto the plate’s slotted holes using M6 bolts, adjusting the position to achieve the desired alignment and visibility.
Tighten the tail light bolts to a snug fit, ensuring that the lamp is held firmly but can still be adjusted if necessary.
During routine maintenance, inspect the plate for signs of corrosion, deformation, or loosening of fasteners. Re‑tighten bolts to the recommended torque as needed.
If any damage or significant wear is detected, replace the plate immediately. Keeping a spare 332115580 plate on hand can help minimize downtime during unexpected repairs.
The 332115580 Tail Light Inner Mounting Plate is manufactured in ISO 9001 and ISO 14001 certified facilities, adhering to the highest quality and environmental management standards.
The raw material, Q345B steel, is sourced from approved mills and undergoes rigorous incoming inspection, including chemical analysis, tensile testing, and impact testing.
The laser‑cutting process is precisely controlled, with regular tooling maintenance and dimensional checks to ensure consistent part geometry and hole positioning.
The zinc‑nickel plating and powder coating processes are carefully monitored, with coating thickness and adhesion verified using non‑destructive testing methods.
Each mounting plate is 100% inspected for visual defects, dimensional accuracy, flatness, and coating integrity. A sample from each production batch is subjected to salt spray testing and load‑deflection testing.
These rigorous quality assurance measures guarantee that every 332115580 plate delivers the reliability, strength, and durability expected from a genuine XCMG component.
Using genuine XCMG 332115580 plates guarantees proper fit, optimal tail light stability, and compatibility with the vehicle’s lighting systems.
The 332115580 Tail Light Inner Mounting Plate is an essential component for maintaining the stability, visibility, and safety of XCMG articulated dump trucks.
As a non‑engine mounting accessory, this plate provides a robust, vibration‑resistant support that ensures the tail light remains firmly positioned, offering clear and reliable rear lighting.
Its high‑strength steel construction, advanced corrosion‑resistant coating, and precision engineering ensure exceptional durability and long‑term performance in the most demanding mining, quarrying, and construction environments.
With its precise OEM fitment and uncompromising quality, this plate offers outstanding value and peace of mind for fleet operators, maintenance professionals, and equipment owners alike.
Choosing the genuine XCMG 332115580 tail light inner mounting plate protects your lighting system, reduces the risk of accidents, and ensures that your articulated dump truck remains productive, reliable, and safe.
Always source genuine XCMG parts from authorised distributors to guarantee authenticity, compliance with OEM specifications, and long‑term performance.
Whether for planned maintenance or emergency repairs, the 332115580 plate is the trusted choice of professionals who demand the highest standards of quality and reliability in their heavy equipment.
