Mounting Bracket
Монтажный кронштейн
Soporte de montaje
The 332113283 Mounting Bracket is a precision‑engineered structural support designed to provide secure and reliable attachment points for hydraulic valves, electronic control units, sensors, and auxiliary components on XCMG articulated dump trucks. As a non‑engine essential part, this bracket ensures that critical systems remain firmly positioned, reducing vibration‑induced wear and maintaining precise alignment in the most challenging mining and construction environments. Manufactured from high‑strength carbon steel with a corrosion‑resistant zinc‑nickel plating and a durable powder‑coat finish, the 332113283 mounting bracket delivers exceptional rigidity, fatigue resistance, and long‑term durability, making it an indispensable component for system integrity and machine reliability in heavy‑duty operations.
The 332113283 Mounting Bracket is a precision‑engineered structural support designed to provide secure and reliable attachment points for hydraulic valves, electronic control units, sensors, and auxiliary components on XCMG articulated dump trucks.
As a non‑engine essential part, this bracket ensures that critical systems remain firmly positioned, reducing vibration‑induced wear and maintaining precise alignment in the most challenging mining and construction environments.
Its robust construction and precise dimensions make it an essential element for maintaining the integrity of hydraulic circuits, electrical harnesses, and sensor networks.
Manufactured from high‑strength carbon steel with a corrosion‑resistant zinc‑nickel plating and a durable powder‑coat finish, this bracket delivers exceptional rigidity, fatigue resistance, and long‑term durability.
The plate’s flat, parallel faces are held to tight tolerances, ensuring consistent spacing and load distribution.
This component is a direct OEM replacement, restoring original mounting integrity and preventing costly failures due to improper attachment or misalignment.
The 332113283 Mounting Bracket is engineered to provide precise positioning and even load distribution, which is crucial for the correct operation of attached components.
Its uniform thickness and flatness ensure that loads are evenly distributed across the mating surfaces, reducing stress concentrations and minimising the risk of component deformation.
This precision is essential for the longevity of hydraulic and electronic systems, where even minor misalignment can lead to accelerated wear and reduced efficiency.
By maintaining correct preload and alignment, the bracket contributes to quieter operation and improved system reliability.
The 332113283 Mounting Bracket features a simple yet robust design that prioritises dimensional accuracy, surface finish, and ease of installation.
The plate is precision‑laser cut and then formed on a CNC press brake to achieve the specified outer dimensions and hole locations, with a controlled thickness of 8 mm.
The faces are ground to a flatness of ≤ 0.10 mm, ensuring a stable, even contact surface. The edges are deburred to prevent sharp edges that could damage seals or other components.
The zinc‑nickel plating provides excellent corrosion protection, while the black powder coating offers additional resistance to abrasion and chemicals.
The bracket’s design allows for easy installation and removal, as it is a loose spacer that fits between mating surfaces. This makes it simple to adjust clearances during assembly or maintenance.
The four slotted mounting holes (13.5 mm and 8.5 mm) allow for fine adjustment in two axes, accommodating manufacturing tolerances and simplifying alignment.
The 332113283 Mounting Bracket is protected by a dual‑layer coating system: a zinc‑nickel base layer that provides sacrificial corrosion protection, and a black powder coating that acts as a tough, abrasion‑resistant barrier.
This combination ensures that the plate remains free from rust and pitting, even when exposed to moisture, mud, and hydraulic fluids.
The coating also reduces the risk of galvanic corrosion when used with dissimilar metals, and the powder‑coat finish provides a low‑friction surface that helps prevent galling.
This durability is particularly important for components that are difficult to access, as it minimises the need for frequent replacements and contributes to the overall reliability of the vehicle.
The 332113283 Mounting Bracket plays a vital role in maintaining the correct positioning of components within assemblies.
Without proper mounting, hydraulic valves can become misaligned, leading to internal leakage, erratic operation, and reduced system performance. Electronic control units can suffer from vibration‑induced solder joint failure.
By providing a precise, durable interface, this component ensures that assemblies retain their design clearances, allowing for smooth, efficient operation.
Its use is critical for maintaining the long‑term reliability of the driveline, suspension, and steering systems, which are subject to constant dynamic loading.
Regular inspection of mounting brackets is recommended during routine maintenance. If a bracket shows signs of wear, corrosion, or deformation, it should be replaced immediately to prevent further damage.
Using a genuine XCMG 332113283 mounting bracket ensures that the replacement part meets the original specifications, preserving the integrity of the assembly.
The 332113283 Mounting Bracket is specifically designed for use in XCMG articulated dump trucks, including the XDA30, XDA40, XDA45, XDA45U, XDA60, and TA30 series models.
It is used in a variety of assemblies, including hydraulic valve banks, electronic control module brackets, sensor mounts, and junction box supports, wherever a secure, adjustable attachment is required.
Its standard dimensions make it a versatile replacement part for many applications within the vehicle.
Beyond articulated dump trucks, this bracket can also be used in other XCMG equipment such as wheel loaders, crawler cranes, and excavators that utilise similar component sizes and mounting interfaces.
Its robust construction and corrosion‑resistant coating make it suitable for a wide range of heavy machinery, providing flexibility for maintenance and repair operations.
When replacing a worn or damaged bracket, using the genuine 332113283 part ensures correct dimensions, material strength, and coating quality.
Installing the 332113283 Mounting Bracket is a straightforward procedure that requires minimal tooling, reducing downtime and maintenance costs.
Before installation, ensure that the mating surfaces are clean and free from burrs or debris. Position the bracket between the components, aligning the mounting holes with the corresponding threaded holes or studs.
For chassis mounting, insert M12 bolts and tighten them in a cross‑pattern to the recommended torque of 80–100 N·m. For component mounting, use M8 bolts torqued to 20–25 N·m.
Verify that the bracket is seated evenly and that the correct clearance is achieved. The slotted holes allow for fine adjustment, so align the component to its required position before final tightening.
During routine maintenance, inspect the bracket for signs of wear, corrosion, or deformation. Replace it immediately if any damage is detected, as compromised mounting can lead to premature component failure.
Keeping a spare 332113283 bracket on hand can minimise downtime during unexpected repairs. Always use genuine XCMG parts to ensure correct fit and performance.
The 332113283 Mounting Bracket is manufactured in ISO 9001 and ISO 14001 certified facilities under strict quality control.
The carbon steel is sourced from approved suppliers and undergoes chemical and mechanical testing to verify its properties, including tensile strength and impact toughness.
The laser‑cutting and forming processes are carefully controlled to achieve the required dimensions and surface finish, with real‑time monitoring of critical parameters.
The zinc‑nickel plating and powder coating are applied in controlled environments and tested for thickness, adhesion, and corrosion resistance using salt spray testing (ASTM B117).
Each bracket is 100% inspected for dimensional accuracy, flatness, hole alignment, and coating integrity. A sample from each batch is subjected to load testing to confirm long‑term performance.
These quality measures ensure that every mounting bracket delivers the reliability and durability expected from a genuine XCMG component.
Using genuine XCMG 332113283 Mounting Brackets guarantees proper fit and long‑lasting performance.
The 332113283 Mounting Bracket is an essential component for maintaining accurate positioning, load distribution, and reliability of auxiliary systems on XCMG articulated dump trucks.
As a non‑engine structural part, it provides the precise mounting interface required for optimal performance and longevity of hydraulic valves, sensors, and control units.
Its robust steel construction, corrosion‑resistant coating, and exact OEM fitment make it an indispensable part of any assembly maintenance program.
With its reliable performance and durability, this mounting bracket offers exceptional value, safeguarding your equipment from premature wear and reducing maintenance costs.
Choosing the genuine 332113283 bracket ensures authenticity and compliance with OEM specifications. Always source genuine XCMG parts from authorized distributors.
Whether for planned maintenance or emergency repairs, the 332113283 mounting bracket is the trusted choice of professionals who value quality, reliability, and long‑term performance in their heavy equipment.
