OEM 319007847 The XCMG Bend Plate 319007847 is a genuine OEM formed steel plate engineered to reinforce and close structural corners on XCMG hydraulic excavators.
Identified by part number 319007847, this factory-formed plate covers angled openings and stiffens the machine body around high-stress zones.
It is produced from high-strength steel sheet, press-bent to the exact angle, and finished with a protective coating that resists rust and abrasion.
Exact OEM bend angle, outline, and hole spacing allow a direct bolt-on replacement without cutting, hammering, or adding sealant on site.
By closing angled gaps and stiffening panels, this bend plate keeps dust and water out and protects internal hydraulic and electrical parts.
The 319007847 Bend Plate is press-bent from high-strength steel sheet that resists denting, warping, and vibration fatigue on rough job sites.
Precision laser cutting produces clean outlines and accurate mounting holes, so the plate seats flat against the frame and closes the gap correctly.
The exact bend angle matches the XCMG panel corner, which restores structural stiffness and prevents panel flutter under machine vibration.
A multi-layer paint system protects the steel from moisture, mud, salt spray, and hydraulic oil exposure in outdoor service.
The plate blocks dust, water splash, and debris from entering angled openings, keeping hoses, wiring, and welds protected.
Exact OEM dimensions allow direct bolt-on replacement without trimming or hammering, which saves repair time and labour cost.
Production starts with certified steel sheet inspected for thickness, flatness, and material grade before it reaches the cutting table.
Laser cutting follows the XCMG drawing to create accurate outlines and hole patterns, then a CNC press brake forms the exact bend angle.
Operators check bend angle and radius with gauges during the run, so every 319007847 plate matches the mating panel geometry.
Edges are deburred so the plate will not cut hands, wiring, or hoses during installation and routine maintenance checks.
After cleaning, the plate is primed and top coated, then checked for coverage, adhesion, and colour match with the XCMG finish.
A bend plate does two jobs at once: it closes an angled opening and it stiffens the surrounding steel so panels do not flex or crack.
When a bend plate is missing or deformed, debris enters the compartment and panel vibration increases at the same corner.
The genuine 319007847 restores the original angle and fit, so the body stays rigid and internal parts stay shielded.
A tight, correctly bent plate also prevents water pooling in the corner, which is a common cause of weld and fastener corrosion.
Keeping the body sealed reduces electrical faults, hose abrasion, and paint failure, which supports longer machine service life.
The 319007847 Bend Plate installs with standard hand tools, keeping downtime and labour costs low during scheduled service.
Park the excavator on firm level ground, lower the attachment, and lock out the machine before starting any work.
Clean the mounting surface and inspect the frame flange for burrs, rust, or distortion before fitting the new plate.
Position the plate by hand, insert the bolts, and tighten them evenly in a cross pattern to the torque value in the manual.
Check that the bend sits flush against the corner without gaps, and confirm that no hoses or wiring are pinched under the edge.
During routine maintenance, check bolts for looseness, remove mud build-up, and touch up coating damage to prevent rust.
Every 319007847 plate is produced in an ISO 9001 and ISO 14001 certified facility with traceability from steel sheet to packed carton.
Incoming steel is tested for thickness and grade, and finished plates are checked for bend angle, hole position, and flatness.
During production, inspectors verify forming angles and coating coverage at set intervals to keep every plate within drawing tolerance.
Post-production checks include visual inspection, dimensional verification, and a trial fit against the XCMG mounting fixture.
Sample plates from each batch undergo salt spray and vibration testing to confirm coating durability and structural stability in the field.
Cheap aftermarket bend plates often use thin sheet, wrong bend angles, or weak paint that rusts and fits badly at the corner.
The genuine 319007847 is built to exacting XCMG standards, delivering correct angle, reliable fit, and durable performance in the field.
Its accurate forming and protective coating reduce the risk of debris intrusion, water pooling, and costly structural damage.
Genuine XCMG parts also preserve warranty coverage, protect resale value, and stay compatible with other OEM components.
Backed by XCMG global quality standards and technical support, this bend plate delivers dependable protection in harsh conditions.
Choosing the genuine 319007847 bend plate prevents small openings from letting debris damage expensive internal parts.
A missing or bent plate can allow mud and stone to chafe hoses and wiring, causing leaks, shorts, and unplanned stoppages.
Durable steel and proper coating keep the plate functional across a long service life, reducing replacement frequency.
Reliable protection also extends the life of hoses, harnesses, and structural welds, lowering the total cost of ownership.
Fleet records from construction and mining operations show genuine XCMG body parts help cut unplanned downtime hours.
XCMG applies sustainable manufacturing to the 319007847 bend plate through recyclable steel content and efficient cutting processes.
The long service life of the plate reduces material waste and lowers the environmental footprint of replacement parts over time.
Proper sealing keeps contaminants out of the machine, which reduces oil degradation and supports cleaner site operation.
Steel and coating materials in this component meet RoHS and REACH rules for safe handling and responsible disposal.
The 319007847 Bend Plate is held in XCMG regional distribution centres across North America, Europe, Asia, and Australia.
Each plate is wrapped in protective material inside a sturdy carton that shields it from bending, scratching, and moisture in transit.
For fleet-wide orders, XCMG provides volume pricing and consolidated freight options that simplify planning and reduce cost.
Real-time stock visibility and dedicated supply chain support help fill urgent requests quickly, shortening downtime on active projects.
Robust packaging preserves factory condition until installation, preventing the paint damage and distortion common in stored spares.
The XCMG 319007847 Bend Plate is a vital body component for XCMG excavators, closing angled openings and reinforcing panels in demanding conditions.
Its high-strength steel body, accurate bend angle, and protective coating deliver dependable performance in hot, wet, and dusty environments.
By blocking debris and water intrusion, this bend plate reduces downtime, lowers maintenance costs, and extends machine service life.
Always purchase genuine XCMG parts from authorised dealers to guarantee authenticity, quality, and performance for your equipment fleet.
Choose the 319007847 Bend Plate for dependable protection and lasting operational peace of mind.
Partner with XCMG, your trusted source for heavy equipment body and hydraulic components that deliver real value.
OEM 319007847 – XCMG Bend Plate – the definitive formed steel bend plate solution for your excavator angled body openings. Engineered for durability, designed for exact fitment, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
