OEM 319006321 The XCMG Elbow Plate 319006321 is a genuine formed steel bracket that turns a hydraulic line around a corner and holds it clear of the frame on XCMG excavators.
Issued under the official part number 319006321, the plate gives the fitter a correctly bent and drilled support point for the pipe or hose it carries.
The body is blanked and formed from steel plate, then drilled and deburred so the bend angle and hole pattern follow the drawing.
Leg length, hole centres and plate thickness match the XCMG drawing, so the bracket bolts flat against the frame without shims.
A protective coating resists corrosion, which keeps the plate strong and stops rust bleeding onto the surrounding paint.
Every plate is checked for bend angle, hole spacing, thickness and coating before the batch is packed for shipment.
Used along boom, arm, undercarriage and swing pipe routes, this elbow plate keeps lines supported so they do not chafe or crack.
The 319006321 plate is formed to the XCMG drawing, so the bend angle and hole spacing match the frame point it bolts to.
Correct leg lengths keep the pipe away from the frame, so the line does not rub or chafe as the machine works.
Holes are drilled and deburred to the drawing, so the fasteners slide in and pull the plate down flat.
The steel plate is thick enough to hold the clamp without flexing, so the pipe stays steady under pressure pulses.
A painted or plated finish resists rust, so the plate keeps its strength and the appearance stays clean.
Because the part carries the OEM number, a technician bolts it in straight from the bag without bending or drilling.
Square bends keep the plate sitting flat on the frame, so it does not rock and loosen the fasteners over time.
A sound elbow plate keeps lines supported, which prevents vibration fatigue and the tube cracking it causes.
Production starts with certified steel plate, checked for grade, thickness and surface condition before blanking begins.
Blanks are cut and bent in hardened tooling to the drawing angle, so each plate matches the next one in a batch.
Holes are drilled on a fixed pattern and deburred, so fasteners seat flat and the plate pulls down evenly.
Inspectors measure bend angle, leg length, hole spacing, thickness and flatness on a gauge for this exact part number.
Batch records trace every 319006321 plate to its steel coil and forming run, so a quality question is settled quickly.
An elbow plate turns a pipe or hose route around a corner and gives the clamp a solid point to bolt to.
Without a proper bracket, a line would rub against the frame, wear through and leak oil onto hot components.
The genuine 319006321 holds the line at the drawing position, so the tube keeps its clearance and does not stress its fittings.
Correct thickness and a square bend stop the plate from flexing, which is what keeps fasteners tight over the machine life.
A sound plate protects tubes, hoses and clamps, which keeps hydraulic service intervals predictable.
The 319006321 plate is fitted with a torque wrench, a socket set and the original clamps during hydraulic service work.
Release system pressure, drain the affected line and clean the frame area so no dirt enters the circuit during the repair.
Clean the mounting face and check the tapped holes for damage, then confirm no paint or old thread lock blocks the threads.
Bolt the plate to the frame by hand first, then fit the clamp and pipe before tightening anything to the service torque.
Check that the tube sits relaxed in the clamp, with no pulling on either end fitting, before the final torque.
Refill with the specified oil, run the machine slowly and check the pipe joints for weeping after the first pressure cycles.
At service intervals, look for loose fasteners, a bent plate, rust or chafed pipe and renew the part before the line is damaged.
Every 319006321 plate is produced in an ISO 9001 and ISO 14001 certified plant with traceability from coil to carton.
Incoming plate is checked for grade and thickness, and finished plates are gauged for bend angle, holes and leg length.
Each batch is inspected for cracks, laps and burrs, since these defects weaken the plate or damage the pipe clamp.
Post-production checks include visual review, dimensional verification and a trial fit on the XCMG frame fixture.
Sample plates from each batch undergo coating and vibration tests to confirm corrosion performance and fatigue resistance.
Cheap copies often use thin plate or a wrong bend angle, so the bracket flexes or the pipe sits off its clamp point.
A plate with wrong hole spacing cannot be bolted flat, which leaves it rocking and the fastener loose within hours.
The genuine 319006321 is formed to the XCMG drawing, so bend, holes, thickness and coating match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM pipe routes.
Backed by XCMG global quality standards and technical support, this elbow plate performs reliably in harsh conditions.
Choosing the genuine 319006321 plate prevents a small bracket failure from becoming a cracked tube and a lost work shift.
A chafed line can wear through and spray hot oil, which stops the machine and can damage nearby components.
A correctly formed plate holds the line steady, so the tube and hose reach their design life instead of failing early.
Reliable brackets keep pipe routes as designed, which lowers the total cost of ownership across a fleet.
Service records from construction and mining fleets show genuine XCMG structural parts cut unplanned downtime.
XCMG produces the 319006321 plate with efficient blanking and forming runs that keep production scrap low.
A long service life means fewer replacements, which reduces the steel and energy tied to each plate.
Stopping chafe and leaks protects soil and groundwater, helping operators meet rules on sensitive sites.
The steel in this part complies with RoHS and REACH requirements for safe handling and responsible recycling.
The 319006321 elbow plate is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each plate is bagged to protect the coating and boxed in a strong carton that guards against damp and bending in transit.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the bend true and the holes clean until fitting, avoiding the distortion seen in loose storage.
The XCMG Elbow Plate 319006321 is a key support bracket on XCMG excavators, routing hydraulic lines around corners and holding them clear.
Its accurate bend, correct hole pattern and protective coating deliver dependable support in hot, wet and dusty conditions.
By keeping lines supported and steady, this plate cuts downtime, protects tubes and hoses and extends circuit life.
Purchase only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 319006321 elbow plate for dependable line support and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 319006321 – XCMG Elbow Plate – the definitive bracket for clean hydraulic routing and steady pipe support on your excavator. Formed to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
