OEM 319004616 The XCMG Pipe Clamp Bracket (319004616) is a genuine OEM mounting component engineered to secure rigid hydraulic steel pipes firmly to the excavator structure. Identified by part number 319004616, this factory-formed bracket holds pipes in precise alignment and dampens vibration that would otherwise crack welds or loosen joints.
Fabricated from high-strength stamped steel with a protective anti-corrosion coating, the 319004616 Pipe Clamp Bracket resists fatigue loading, mechanical shock, and continuous machine movement. Its exact OEM geometry, hole spacing, and clamping diameter guarantee a direct replacement without drilling or modification.
By keeping hydraulic pipes rigidly positioned and isolated from excessive vibration, this bracket protects the entire fluid circuit, prevents abrasion between lines, and keeps your excavator working productively through long shifts.
The 319004616 Pipe Clamp Bracket uses a stamped steel body that resists fatigue loading and mechanical shock without bending. Its rigid form holds hydraulic pipes in precise alignment.
A rubber insert sits between the clamp and the pipe, isolating the steel line from structure-borne vibration. This damping prevents abrasion, fretting, and premature weld cracking.
The bracket is secured with two mounting bolts spaced to match the OEM pattern. Correct torque compresses the rubber evenly, so the pipe is held firmly without being crushed.
The outer surface receives zinc-nickel plating and an anti-corrosion coating. This keeps the steel protected from moisture, road salt, and hydraulic fluid attack in the field.
By holding pipes securely and damping vibration, the 319004616 bracket prevents leaks, protects adjacent components, and keeps the hydraulic circuit operating reliably.
Production begins with certified steel sheet selected for chemical composition and mechanical properties. Each batch is tested for hardness, tensile strength, and dimensional accuracy.
Stamping dies form the bracket to exact geometry, maintaining consistent hole positions and bend radii. Uneven forming would create stress concentrations prone to cracking.
Welded joints, where present, are performed with qualified procedures and inspected for penetration and porosity. Post-weld treatment relieves residual stresses and restores toughness.
Every finished bracket is checked for dimensional accuracy, coating thickness, and rubber insert fit. Any unit that fails visual or gauge inspection is rejected immediately.
The result is a pipe clamp bracket that performs predictably for thousands of hours on your XCMG excavator, season after season, in the most punishing applications.
Rigid hydraulic pipes must be anchored at regular intervals to prevent sagging, rubbing, and fatigue failure. Brackets provide that anchoring on the boom and upper structure.
The 319004616 Pipe Clamp Bracket maintains steady pipe alignment and consistent damping, preventing intermittent contact and shielding lines from vibration-induced cracks.
Field records from heavy excavation work show that machines fitted with genuine XCMG brackets suffer fewer hydraulic leaks and shorter diagnostic sessions, improving availability.
The robust construction and protective coating also resist moisture, dust, and chemical exposure, keeping performance stable across long service intervals in the field.
Inspect brackets regularly for cracked welds, corrosion pits, deformed clamps, or hardened rubber inserts. Replace any compromised unit promptly with a genuine 319004616 part.
By keeping pipes anchored and isolated from vibration, this bracket supports safe, productive excavator operation every working day on construction and mining sites.
The 319004616 Pipe Clamp Bracket installs easily with standard hand tools, which keeps downtime and labour costs low during scheduled servicing or emergency replacement.
Park the excavator on firm level ground, lower the attachment, and release all hydraulic pressure. Lock out the machine so the engine cannot be started while work is in progress.
Clean the mounting surface and pipe so no grit becomes trapped. Inspect the rubber insert for cracks or hardening, and replace it if the material has lost elasticity.
Align the bracket holes with the mounting points, insert the bolts, and tighten to the specified torque. Over-tightening can crush the pipe or split the rubber insert.
After assembly, run the machine at low idle and check that the pipe does not move or contact nearby components. Cycle the functions slowly and inspect again when warm.
During routine service, inspect the bracket for wear, corrosion, or coating damage. Replace any degraded assembly promptly to preserve hydraulic performance and avoid breakdowns.
Choosing the genuine 319004616 Pipe Clamp Bracket pays back over time by preventing hydraulic leaks, cutting diagnostic hours, and eliminating downtime caused by failed supports.
One loosened pipe can rub through a neighbouring line in hours, dumping the hydraulic tank and pushing debris through pumps, valves, and cylinders.
Across a typical 10,000-hour service life, the hydraulic circuit endures millions of pressure cycles. The reinforced build of the 319004616 keeps pipe alignment consistent throughout.
Reliable pipe support also extends the life of connected components such as pumps, valves, and cylinders, reducing replacement frequency and total maintenance spending.
Field data gathered from large mining and construction fleets shows genuine XCMG brackets cut hydraulic-related downtime by as much as 15 percent across a working season.
The durable construction and quality coating keep the bracket serviceable for years, removing the need for premature replacement and lowering lifecycle costs.
XCMG applies sustainable manufacturing principles to the 319004616 Pipe Clamp Bracket through recyclable steel construction and energy-efficient production processes.
The extended service life, often exceeding 8,000 hours in normal conditions, cuts material waste and lowers the environmental footprint associated with frequent replacements.
Preventing hydraulic leaks also avoids secondary damage and soil contamination, which supports regulatory compliance and responsible environmental stewardship on job sites.
Steel and rubber components are free from restricted substances and comply with RoHS and REACH rules, ensuring safe handling and disposal at the end of life.
Selecting genuine XCMG hydraulic components supports responsible equipment management while delivering superior operational reliability and safety for your fleet.
The 319004616 Pipe Clamp Bracket is held in XCMG regional distribution centres across North America, Europe, Asia, and Australia, supporting fast delivery for scheduled maintenance.
Every unit is packed with protective wrapping inside a custom-fitted carton, shielding it from impact, moisture, and ultraviolet light throughout transit and storage.
For fleet-wide orders, XCMG offers volume pricing and consolidated freight options that reduce procurement costs and streamline inventory planning for large operators.
Real-time stock visibility and dedicated supply chain support help fulfil urgent requests quickly, shortening downtime and keeping excavators on the job.
Sturdy packaging preserves the bracket’s factory condition until it is installed, preventing the coating damage that can occur in poorly stored spare parts.
With XCMG’s global aftermarket network behind it, you can depend on consistent quality and availability to keep your fleet working at full capacity.
Every 319004616 Pipe Clamp Bracket comes from an ISO 9001 and ISO 14001 certified plant with complete material traceability from raw steel to packed product.
Incoming steel sheet and rubber inserts are tested for chemical composition, mechanical properties, and dimensional accuracy before release to production.
During manufacturing, hole position, bend angle, coating thickness, and insert hardness are monitored continuously, and every finished unit receives a full visual inspection.
Post-production checks include dimensional verification, torque testing, and load testing to confirm each bracket matches the required specification.
Sample brackets from each batch undergo vibration cycling, salt spray exposure, and fatigue testing to prove long-term durability and holding performance in service.
Only assemblies that clear every quality gate are released, so you receive a dependable, high-performance mounting component every time you order.
Cheap aftermarket brackets often use thinner steel, inferior rubber, or poorly plated surfaces. Those shortcuts lead to early cracking, hardened inserts, and loose pipes.
The genuine 319004616 is built to XCMG’s exacting standards, delivering correct hole spacing, reliable clamping force, and durable performance in the field.
Its high-strength steel body and precision stamping provide consistent results, lowering the chance of expensive hydraulic failures and unplanned machine downtime.
Using genuine XCMG parts also preserves warranty coverage, protects resale value, and maintains compatibility with other OEM systems on the machine.
Backed by XCMG’s global quality standards and technical support, this pipe clamp bracket offers performance you can rely on shift after shift.
Choose genuine XCMG for uncompromising hydraulic performance in the most demanding working conditions your excavator will ever face.
The XCMG 319004616 Pipe Clamp Bracket is a vital hydraulic mounting component for any XCMG excavator, ensuring reliable pipe support for boom and upper structure circuits.
Its precision-engineered design, high-strength steel construction, and robust manufacturing deliver dependable clamping performance, enabling safe and productive operation.
By preventing pipe movement and damping vibration, this bracket reduces downtime, lowers maintenance costs, and extends machine service life.
Always purchase genuine XCMG parts from authorised dealers to guarantee authenticity, quality, and performance for your equipment fleet over the long term.
Choose the 319004616 Pipe Clamp Bracket for dependable pipe mounting and lasting operational peace of mind in the toughest working environments.
Partner with XCMG – your trusted source for heavy equipment hydraulic components that deliver real value, genuine quality, and long-term reliability.
OEM 319004616 – XCMG Pipe Clamp Bracket – the definitive rigid pipe mounting solution for your excavator’s hydraulic circuit. Engineered for durability, designed for reliable clamping force, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
