OEM 318602660 The XCMG Steel Pipe 318602660 is a genuine OEM steel pipe built to carry hydraulic oil along a fixed route on XCMG hydraulic excavators.
Marked with part number 318602660, this factory pipe gives service crews a rigid, sealed and correctly shaped line for hydraulic repairs.
The pipe is formed from seamless cold-drawn steel tube, bent to the exact OEM path, then treated with an anti-corrosion coating inside and outside.
Accurate outer diameter, wall thickness, length and bend radius allow direct replacement without cutting, welding or adding adapters.
Because steel holds its form under pressure, this pipe keeps flow steady and resists vibration fatigue through long working shifts.
Every unit is pressure checked, flushed and measured before packing, so the part received matches the XCMG drawing specification exactly.
The 318602660 steel pipe uses seamless cold-drawn tube that keeps its bore round and its wall strong under continuous pressure.
Mandrel bending reproduces the OEM route, so the pipe clears booms, frames and attachments without touching or rubbing.
A bonded anti-corrosion coating shields the outer wall from mud, moisture and salt spray, which are constant on excavation sites.
Factory-formed ends mate with original fittings and seals, so the joint seals correctly the first time without rework.
Rigid steel construction resists vibration fatigue far better than flexible hose on high-pressure, high-cycle hydraulic runs.
Exact dimensions remove the need for field fabrication, welding or adapter stacks, which shortens repair time on every machine.
A smooth, clean bore also limits internal pressure loss, which helps the pump and valves deliver consistent response.
Production starts with certified seamless tube checked for wall thickness, ovality, hardness and surface condition before forming.
Each pipe is bent on a CNC mandrel bender that holds the drawing angles and radii within tight limits, so no kinks appear.
After bending, ends are formed, deburred and flushed so no chips or scale can enter the hydraulic circuit at installation.
Inspectors verify bend angle, center distance, length and end geometry against a checking fixture built for this part number.
Batch records trace every 318602660 pipe back to its steel heat number and bending program, so quality questions are answered fast.
The steel pipe carries pressurized oil between fixed components where a flexible hose would flex, chafe or expand.
A corroded or cracked pipe leaks oil, drops circuit pressure and slows boom, arm and bucket response during work cycles.
The genuine 318602660 keeps the line sealed and rigid, so flow stays steady and contamination cannot enter the system.
Correct routing away from hot surfaces and moving parts prevents abrasion damage, which is a leading cause of pipe failure.
Stable hydraulic pressure protects pumps, valves and cylinders, which keeps cycle times and machine uptime predictable.
The 318602660 steel pipe installs with standard hand tools and a torque wrench during scheduled hydraulic service.
Relieve hydraulic pressure completely, stop the engine and place a drain pan under the fittings before loosening anything.
Remove the old pipe, then clean both ports and inspect threads, O-rings and clamps for wear, corrosion or cracks.
Set the new pipe in position along the OEM route, align both ends by hand first, and never force the tube to close a gap.
Tighten fittings to the specified torque, refit the clamps and confirm the pipe cannot contact any other component.
Start the engine, cycle each function slowly, and check both joints and the full tube length for weeping or movement.
During routine maintenance, check clamp tightness and look for rust spots, dents or chafing marks on the coating.
Every 318602660 pipe is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel heat to packed carton.
Incoming tube is tested for wall thickness and material grade, and finished pipes are measured for bore, length and bend angle.
During production, bending force, mandrel condition and coating thickness are monitored so each unit keeps its intended form.
Post-production checks include visual inspection, dimensional verification and a trial fit on the XCMG hydraulic line fixture.
Sample pipes from each batch undergo pressure, salt spray and vibration tests to confirm long-term performance in service.
Low-cost aftermarket pipes often use thin-wall tubing that deforms under pressure and corrodes quickly in wet conditions.
A pipe with the wrong bend or length can stress the fitting threads, which leads to seepage and repeated rework.
The genuine 318602660 is formed to the XCMG drawing, so bore, wall, bend path and end geometry match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps compatibility with other OEM components.
Backed by XCMG global quality standards and technical support, this steel pipe performs reliably on harsh job sites.
Choosing the genuine 318602660 pipe prevents a small hydraulic weep from turning into an expensive pump or valve repair.
A failed pressure line can drain a reservoir quickly, which starves the pump and damages internal parts within minutes.
Correct steel wall thickness and proper coating keep the pipe functional across a long service life, reducing replacement frequency.
Reliable hydraulic delivery also extends pump, seal and oil life, lowering the total cost of ownership for fleet operators.
Service records from construction and mining fleets show genuine XCMG hydraulic parts cut unplanned downtime.
XCMG applies sustainable manufacturing to the 318602660 pipe through efficient bending programs and reduced material waste.
The long service life of the pipe reduces material consumption and lowers the environmental footprint of replacement parts.
Preventing hydraulic leaks protects soil and groundwater and supports compliance on environmentally sensitive sites.
Steel and coating materials in this component comply with RoHS and REACH rules for safe handling and responsible recycling.
The 318602660 steel pipe is held in XCMG regional distribution centres across North America, Europe, Asia and Australia.
Each pipe is capped at both ends and packed in a sturdy carton that protects it from bending, dust and moisture in transit.
For fleet-wide orders, XCMG provides volume pricing and consolidated freight options that simplify planning and reduce cost.
Real-time stock visibility and dedicated supply chain support help fill urgent requests quickly, shortening downtime on projects.
Robust packaging preserves factory condition until installation, preventing deformation and thread damage common in stored pipes.
The XCMG Steel Pipe 318602660 is a vital connection component for XCMG excavators, linking fixed points in the hydraulic circuit.
Its seamless steel tube, anti-corrosion coating and precise bend shape deliver dependable flow in hot, wet and dusty environments.
By preventing leaks and rubbing damage, this steel pipe reduces downtime, lowers maintenance costs and extends service life.
Always purchase genuine XCMG parts from authorised dealers to guarantee authenticity, quality and performance for your fleet.
Choose the 318602660 steel pipe for dependable hydraulic connections and lasting operational peace of mind.
Partner with XCMG, your trusted source for heavy equipment engine and hydraulic components that deliver real value.
OEM 318602660 – XCMG Steel Pipe – the definitive steel pipe solution for your excavator hydraulic circuit. Engineered for pressure resistance, designed for exact fitment, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
