OEM 319007678 The XCMG Bracket 319007678 is a genuine OEM mounting bracket that secures hydraulic lines and components on XCMG excavators.
Issued under the official part number 319007678, this bracket provides the correct hole spacing, angle and strength for its mounting point.
The bracket is formed, welded and finished to the XCMG drawing, so it bolts to the frame without bending, shimming or redrilling.
Its steel body resists vibration and load, so the mounted parts stay steady through digging, lifting and travel cycles.
A protective surface finish resists oil, water, dust and salt, so the bracket keeps its strength in outdoor and wash-down service.
Every unit is checked for hole position, weld quality, flatness and finish before it is packed for shipment.
Fitted to boom, arm, frame and undercarriage points, this bracket keeps lines and components clear of moving parts.
The 319007678 bracket is produced to the XCMG drawing, so the hole spacing, angle and height match the mounting point on the first attempt.
A rigid steel body absorbs vibration and load, so mounted lines and components stay steady better than with a low-grade replacement.
The correct shape keeps hoses and pipes clear of sharp edges and moving parts, which prevents rubbing and premature failure.
The protective finish resists oil, water, dust and salt, so the bracket does not corrode or flake apart in outdoor service.
Because the bracket matches the OEM number, a fitter installs it straight from the box without bending, shimming or redrilling.
Correct hole position and flatness keep the bolts tight under vibration, so the bracket does not work loose or crack at the weld.
A sound bracket also protects the hose and components it carries, which keeps oil clean and service intervals predictable.
Keeping a spare bracket on the shelf shortens repair time, so a broken mount does not leave the machine idle for long.
Each lot begins with certified steel plate tested for chemistry, thickness and weldability before the first cut is made.
Brackets are formed and welded in controlled tooling, so hole position, angle and flatness stay uniform from batch to batch.
Deburring and cleaning remove sharp edges and weld spatter, so the bracket mounts cleanly and does not chafe nearby hoses.
Inspectors measure hole size, hole spacing, weld quality, flatness and finish against a gauge for this part number.
Batch records trace every 319007678 bracket to its steel lot and production run, so a quality question is settled quickly.
A mounting bracket holds hydraulic lines and components in place, so the machine can lift, dig and travel without chafing or vibration damage.
A cracked or loose bracket lets lines rub, which causes hose wear, oil leaks and unplanned downtime on site.
The genuine 319007678 keeps the mount rigid, so lines stay clear of hot surfaces and moving parts through every working cycle.
Correct hole spacing and flatness avoid both a bracket that is forced into place and one that loosens under vibration.
A sound bracket protects the hoses, pump and valve block, which keeps service intervals predictable and extends machine life.
The 319007678 bracket is installed with a cleaning cloth, a spanner set and a torque wrench during normal service work.
Release system pressure where needed, remove the old bracket, clean the frame and check the bolt holes so no dirt sits under the new part.
Check the frame and nearby hoses for cracks, rust or sharp edges, since a damaged mount will wear the new bracket and chafe lines.
Lift the bracket into place, start the bolts by hand and align the holes before final tightening.
Tighten to the torque in the service data, so the bracket seats firmly without distorting the frame or crushing the mount.
Run the machine and check for movement, rubbing or loose bolts, then confirm the hoses are clear of hot and moving parts.
At service intervals, look for loose bolts, cracked welds or corrosion and renew the part before lines are damaged.
Every 319007678 bracket is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel to carton.
Incoming steel is tested for chemistry and thickness, and finished brackets are gauged for hole size, spacing and flatness.
Each batch is screened for weld defects, hole misalignment and surface flaws, since these faults let the mount loosen or crack.
Post-production checks include visual review, dimensional verification and a load test on sample brackets.
Sample brackets from each batch undergo salt spray and vibration tests to confirm corrosion and loosening resistance.
Cheap copies often use thin steel and rough welds, so the bracket bends, cracks or lets lines rub against the frame.
A bracket with the wrong hole spacing or angle can force the mount, loosen under vibration or chafe nearby hoses.
The genuine 319007678 is made to the XCMG drawing, so dimensions, strength and finish match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM mounting points.
Backed by XCMG global quality standards and technical support, this bracket performs reliably in harsh conditions.
Choosing the genuine 319007678 bracket prevents a small mount problem from turning into a hose failure or a damaged component.
A failed bracket lets lines rub and oil escape, which wears parts, raises heat and shortens component life.
A correctly formed bracket holds firmly, so it does not need repeated tightening and does not wear out bolt holes.
Reliable brackets also keep the machine bay clean, which improves appearance and lowers ownership cost.
Service records from construction and mining fleets show genuine XCMG parts cut unplanned downtime.
XCMG produces the 319007678 bracket with efficient cutting and welding runs that keep production scrap low.
A long service life means fewer replacements, which lowers the material and energy tied to each bracket.
Keeping lines properly supported prevents chafing and oil leaks, which protects soil, groundwater and internal parts.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 319007678 bracket is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each unit is bagged to protect the finish and boxed in a strong carton that guards against dust, damp and impact.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the bracket flat and the holes clean until installation, avoiding damage seen in loose storage.
The XCMG Bracket 319007678 is a critical mounting part on XCMG excavators, holding the lines and components that do the work.
Its accurate holes, strong welds and durable finish deliver dependable support in rain, dust and heat.
By keeping the mount rigid, this bracket cuts downtime, protects hoses and extends the life of the machine.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 319007678 bracket for dependable mounting and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 319007678 – XCMG Bracket – the definitive mounting bracket for clean, reliable support on your excavator. Made to the drawing, inspected for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
