OEM 319002317 The XCMG Sponge 319002317 is a genuine foam element that seals gaps, damps vibration and keeps dust and water away from the working parts of XCMG hydraulic excavators.
Issued under the official part number 319002317, the sponge gives the technician a correctly sized pad that matches the cavity, panel lip and compression gap it is designed for.
The foam is cut and shaped to the XCMG drawing, so the outline, thickness and cell structure fit the space without trimming or folding during assembly.
A soft, resilient structure compresses into irregular gaps, so the pad keeps its seal even when covers and panels flex under load.
The compound resists oil, water and UV light, so the sponge does not crumble, harden or lose its cushion through long outdoor duty.
Every piece is checked for length, width, thickness, density and cut quality before the batch is packed for shipment.
Fitted to cab panels, covers, ducts and wiring routes, this sponge keeps dust and noise out and stops parts rubbing against each other.
The 319002317 sponge is produced to the XCMG drawing, so the outline and thickness fill the cavity on the first attempt.
A soft, resilient structure compresses into irregular gaps, so panels and covers sit tight without rattling.
The foam resists oil, water and UV light, so the sponge does not crumble or harden in outdoor service.
A clean cut edge seats flat against the panel, so there is no gap for dust or noise to pass through.
Because the part matches the OEM number, a fitter installs it straight from the bag without trimming or adding glue.
Correct density keeps the foam springy under vibration, so it keeps cushioning rather than flattening out.
A sound sponge also stops cables and hoses rubbing on sharp edges, which prevents wear and short circuits.
Keeping spare sponge on the shelf shortens repair time, so a missing pad does not leave a panel rattling.
Each lot begins with certified foam block tested for density, hardness, tensile strength and compression set before cutting.
Sponge pieces are cut or molded in controlled tooling, so the outline, thickness and cell structure stay uniform from batch to batch.
Clean cut edges keep the cell walls intact, so the foam does not shed crumbs into the cab or the hydraulic bay.
Inspectors measure length, width, thickness and density against a gauge made for this exact part number.
Batch records trace every 319002317 sponge to its foam lot and production run, so a quality question is settled quickly.
A sponge fills the gap between two surfaces, so dust, water and noise cannot pass through a panel joint.
A missing or flattened sponge lets panels rattle, which wears the fixings and lets contamination into the cab or bay.
The genuine 319002317 keeps the gap closed, so the operator station stays quiet and the internals stay clean.
Correct density avoids both a sponge that crushes flat and one that is too stiff to let the panel seat.
A sound sponge protects wiring, hoses and panels, which keeps service intervals predictable and extends machine life.
The 319002317 sponge is installed with a cleaning cloth, scissors and a roller during cab or body service work.
Remove the old sponge and clean the panel or frame so no dirt or old adhesive sits under the new part.
Check the surface for burrs, rust or oil, since a rough or greasy face will stop the sponge sitting flat.
Fit the sponge into the gap, press it evenly and roll any adhesive backing so it bonds along the whole length.
Close the panel and check that it compresses the sponge slightly, so the gap seals without holding the panel proud.
Run the machine and listen for rattles or wind noise, then confirm the sponge has not shifted or torn.
At service intervals, look for a crushed, torn or missing sponge and renew the part before dust gets inside.
Every 319002317 sponge is produced in an ISO 9001 and ISO 14001 certified plant with traceability from foam to carton.
Incoming foam is tested for density and hardness, and finished pieces are gauged for length, width and thickness.
Each batch is screened for tears, voids and poor cuts, since these defects let the sponge crumble or lose its seal.
Post-production checks include visual review, dimensional verification and a trial fit in the XCMG panel gap fixture.
Sample pieces from each batch undergo compression, heat ageing and oil immersion tests to confirm sealing and cushion performance.
Cheap copies often use low-density foam that flattens or crumbles, so the gap reopens and dust gets inside.
A sponge with the wrong thickness or density can hold a panel proud, tear on closing or fail to seal the joint.
The genuine 319002317 is made to the XCMG drawing, so size, thickness, density and material match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM panels.
Backed by XCMG global quality standards and technical support, this sponge performs reliably in harsh conditions.
Choosing the genuine 319002317 sponge prevents a small gap from turning into a dust-filled cab or a chafed wiring loom.
A failed sponge lets panels rattle and lets dirt reach the internals, which wears parts and shortens component life.
A correctly made sponge holds its shape, so it does not need repeated replacement and does not flatten between services.
Reliable sponges also keep the cab quiet and clean, which improves operator comfort and lowers ownership cost.
Service records from construction and mining fleets show genuine XCMG parts cut unplanned downtime.
XCMG produces the 319002317 sponge with efficient cutting and molding runs that keep production scrap low.
A long service life means fewer replacements, which lowers the material and energy tied to each sponge.
Sealing panel gaps keeps dust and water out, which protects the machine and keeps it usable for its full life.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 319002317 sponge is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each piece is bagged to protect the foam and boxed in a strong carton that guards against dust, damp and crushing.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the sponge uncompressed until fitting, avoiding the permanent set seen in loose storage.
The XCMG Sponge 319002317 is a small but important sealing part on XCMG excavators, filling gaps and damping vibration.
Its accurate size, correct density and durable foam deliver dependable sealing in rain, dust and heat.
By keeping gaps closed, this sponge cuts downtime, protects internal parts and extends the life of the assembly.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 319002317 sponge for dependable sealing and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 319002317 – XCMG Sponge – the definitive sealing and cushion element for quiet, clean compartments on your excavator. Cut to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
