OEM 318502241 The XCMG Oil Dipstick 318502241 is a genuine level gauge that lets the operator read the hydraulic oil level in the reservoir on XCMG excavators.
Issued under the official part number 318502241, the dipstick gives the technician a correctly sized gauge that matches the tube length, stop collar and handle thread it is designed for.
The blade and stop are formed to the XCMG drawing, so the marks sit at the correct height and the handle seats against the tube without rattling loose.
Clear high and low marks show when the oil is correct, so the operator can top up before the pump runs short.
A plated blade and sealed handle resist oil, water and corrosion, so the dipstick keeps its marks readable through wash-down and long outdoor duty.
Every unit is checked for overall length, mark position, handle thread and surface finish before the batch is packed for shipment.
Fitted to the hydraulic reservoir and gear cases, this dipstick makes daily oil checks quick, accurate and clean.
The 318502241 dipstick is produced to the XCMG drawing, so the length and marks sit at the correct height on the first attempt.
Clear high and low marks show the correct oil level, so the operator tops up before the pump runs short.
A sealed handle keeps oil from weeping out and dust from entering, so the reservoir stays clean between checks.
The plated blade resists oil, water and wash chemicals, so the marks stay readable instead of rusting over.
Because the part matches the OEM number, a fitter installs it straight from the bag without measuring or re-marking.
Correct blade thickness keeps the dipstick straight, so it slides in and out of the tube without bending.
A sound dipstick also stops the operator overfilling, which protects seals and keeps the hydraulic system running cool.
Keeping a spare dipstick on the shelf shortens repair time, so a lost gauge does not leave the oil level unreadable.
Each lot begins with certified steel blade and handle stock tested for thickness, hardness and coating adhesion before forming.
Blades are formed and marked in controlled tooling, so the length, mark position and handle thread stay uniform from batch to batch.
Deburring and polishing smooth the blade edges, so the dipstick slides in without snagging and does not cut the tube.
Inspectors measure overall length, mark position, blade width and handle thread against a gauge made for this exact part number.
Batch records trace every 318502241 dipstick to its steel lot and production run, so a quality question is settled quickly.
An oil dipstick shows the oil level in a reservoir, so the operator knows when to top up before the pump runs short.
A missing or bent dipstick leaves the level unknown, which can cause overfilling, aeration or pump cavitation.
The genuine 318502241 reads accurately, so the operator keeps the oil in the safe range and the system stays healthy.
Correct length avoids both a dipstick that reads low on a short blade and one that bottoms out and gives a false level.
A sound dipstick protects the pump, seals and cylinders, which keeps service intervals predictable and extends machine life.
The 318502241 dipstick is installed with a cleaning cloth, a spanner set and a funnel during hydraulic service work.
Remove the old dipstick, clean the tube and wipe the handle seat so no dirt or oil sits under the new part.
Check the tube and handle threads for damage, rust or old sealant, since a rough surface will stop the dipstick sealing.
Slide the dipstick fully into the tube, then check that the marks read in the correct range on level ground.
Tighten the handle to the torque in the service data, so the dipstick seals without cracking the handle or the tube.
Run the machine, stop and check the level again, then confirm the handle area is dry after the first working cycle.
At service intervals, look for a bent blade, faded marks or a leaking handle and renew the part before the level reads wrong.
Every 318502241 dipstick is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel to carton.
Incoming steel is tested for thickness and hardness, and finished dipsticks are gauged for length, marks and handle thread.
Each batch is screened for cracks, bends and coating defects, since these flaws cause the dipstick to read wrong or seize.
Post-production checks include visual review, dimensional verification and a trial fit in the XCMG tube fixture.
Sample dipsticks from each batch undergo bend, cycle and salt spray tests to confirm strength and corrosion performance.
Cheap copies often use thin blades or wrong marks, so the dipstick bends, reads low or gives a false level.
A dipstick with the wrong length or mark position can sit too deep, leak at the handle or leave the level unreadable.
The genuine 318502241 is made to the XCMG drawing, so length, marks, handle thread and material match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM tubes.
Backed by XCMG global quality standards and technical support, this dipstick performs reliably in harsh conditions.
Choosing the genuine 318502241 dipstick prevents a wrong level reading from turning into a damaged pump or aeration.
A failed dipstick leaves the oil level unknown, which can cause overfilling, seal failure and unplanned downtime.
A correctly made dipstick reads firmly, so it does not need repeated replacement and does not wear out the tube threads.
Reliable dipsticks also keep the oil in range, which improves machine performance and lowers ownership cost.
Service records from construction and mining fleets show genuine XCMG parts cut unplanned downtime.
XCMG produces the 318502241 dipstick with efficient forming and marking runs that keep production scrap low.
A long service life means fewer replacements, which lowers the material and energy tied to each dipstick.
Keeping the oil at the right level prevents leaks and contamination, which protects soil, groundwater and internal parts.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 318502241 dipstick is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each unit is bagged to protect the finish and boxed in a strong carton that guards against dust, damp and bending.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the blade straight and the marks readable until fitting, avoiding the distortion seen in loose storage.
The XCMG Oil Dipstick 318502241 is a small but important maintenance part on XCMG excavators, showing the oil level in the reservoir.
Its accurate marks, correct length and durable material deliver dependable readings in rain, dust and heat.
By keeping the oil level known, this dipstick cuts downtime, protects the pump and extends the life of the machine.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 318502241 dipstick for dependable oil level checks and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 318502241 – XCMG Oil Dipstick – the definitive oil level gauge for accurate, clean oil checks on your excavator. Formed to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
