OEM 803309610 The XCMG Mounting Bracket 803309610 is a genuine steel bracket that anchors a component to the chassis of XCMG hydraulic excavators.
Issued under the official part number 803309610, the bracket gives the technician a correctly sized support that matches the frame holes, arm angle and clearance it is designed for.
The plate and arm are cut, folded and welded to the XCMG drawing, so the outline, mounting holes and gusset line up with the chassis without drilling or slotting.
Folded edges and a welded gusset stiffen the bracket, so it carries the mounted part steady under vibration and shock.
A protective coating resists water, dust and corrosion, so the bracket keeps its strength and finish through wash-down and long outdoor duty.
Every unit is checked for hole spacing, arm angle, weld quality and flatness before the batch is packed for shipment.
Fitted to panels, tanks, filters and accessory mounts, this bracket keeps supported parts aligned, secure and easy to service.
The 803309610 bracket is produced to the XCMG drawing, so the holes and arm line up with the chassis on the first attempt.
A welded gusset stiffens the arm, so the mounted component stays steady instead of shifting under vibration and shock.
A square, flat base seats evenly on the frame, so the bracket does not rock, rattle or stress the bolt holes.
The coating resists water, dust and wash chemicals, so the bracket does not rust through or flake apart in outdoor service.
Because the part matches the OEM number, a fitter installs it straight from the box without drilling, bending or adding spacers.
Correct section thickness keeps the bracket rigid under load, so it does not sag or crack at the mounting points.
A sound bracket also holds hoses, harnesses and accessories clear of hot or moving parts, which protects them from damage.
Keeping a spare bracket on the shelf shortens repair time, so a bent mount does not leave a component unsupported.
Each lot begins with certified steel plate tested for thickness, chemistry and tensile strength before it reaches the fabrication line.
Brackets are cut and welded in controlled fixtures, so the base, arm and holes stay square and uniform from batch to batch.
Grinding and deburring clean the weld edges and holes, so the bracket seats flat and does not cut hands, hoses or harnesses.
Inspectors measure hole spacing, arm angle, length, width and weld quality against a gauge made for this exact part number.
Batch records trace every 803309610 bracket to its steel lot and production run, so a quality question is settled quickly.
A mounting bracket anchors a component to the chassis, so the part stays fixed while the machine works and travels.
A bent or cracked bracket lets the mounted part shift, which rubs hoses, cracks fittings and causes unexpected failure.
The genuine 803309610 keeps the mount rigid, so the supported part stays aligned and the mounting points stay intact.
Correct fit avoids both a bracket that rocks on a rough frame face and one that sits too close to a hot or moving part.
A sound bracket protects hoses, wiring and components, which keeps service intervals predictable and extends machine life.
The 803309610 bracket is installed with a cleaning cloth, a spanner set and a torque wrench during body or component service work.
Remove the mounted part, clean the frame face and check the threads so no dirt or metal chips enter during the repair.
Check the chassis and brackets for cracks, rust or bent metal, since a damaged face will stop the bracket sitting flat.
Lift the bracket into place, start the bolts by hand and confirm the holes align before tightening any fastener.
Tighten to the torque in the service data, so the bracket stays put without crushing the plate or stripping the thread.
Refit the supported part, run the machine slowly and check the bracket for movement, rubbing or noise after the first cycles.
At service intervals, look for loose bolts, cracked welds or a bent arm and renew the part before the component shifts.
Every 803309610 bracket is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel to carton.
Incoming steel is tested for thickness and chemistry, and finished brackets are gauged for hole spacing, arm angle and dimensions.
Each batch is screened for weld porosity, cracks and coating defects, since these flaws let the bracket fail under load.
Post-production checks include visual review, dimensional verification and a trial fit on the XCMG chassis fixture.
Sample brackets from each batch undergo load, vibration and salt spray tests to confirm strength and corrosion performance.
Cheap copies often use thin plate and light welds, so the bracket bends or cracks soon after the machine starts working.
A bracket with the wrong hole spacing or arm angle can sit crooked, rub a hose or fail to hold the component square.
The genuine 803309610 is made to the XCMG drawing, so outline, holes, arm angle and material match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM chassis points.
Backed by XCMG global quality standards and technical support, this mounting bracket performs reliably in harsh conditions.
Choosing the genuine 803309610 bracket prevents a small bend from turning into a damaged component or a cracked fitting.
A failed bracket lets the mounted part shift, which rubs hoses and wiring and shortens the life of the parts around it.
A correctly made bracket holds firmly, so it does not need repeated tightening and does not wear out the chassis holes.
Reliable brackets also keep components in place, which improves machine performance and lowers ownership cost.
Service records from construction and mining fleets show genuine XCMG parts cut unplanned downtime.
XCMG produces the 803309610 bracket with efficient cutting and welding runs that keep production scrap low.
A long service life means fewer replacements, which lowers the material and energy tied to each bracket.
Supporting components correctly prevents leaks and damage, which protects soil, groundwater and internal parts.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 803309610 bracket is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each unit is wrapped to protect the coating and boxed in a strong carton that guards against dust, damp and impact.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the arm square and the base plate flat until fitting, avoiding the distortion seen in loose storage.
The XCMG Mounting Bracket 803309610 is a small but important structural part on XCMG excavators, anchoring components to the chassis.
Its accurate size, rigid arm and durable coating deliver dependable support in rain, dust and heat.
By keeping parts in place, this bracket cuts downtime, protects nearby hoses and wiring and extends the life of the assembly.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 803309610 bracket for dependable component support and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 803309610 – XCMG Mounting Bracket – the definitive support bracket for steady, protected components on your excavator. Fabricated to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
