OEM 804415212 The XCMG Air Filter 804415212 is a genuine engine air cleaner element that removes dust and grit before air reaches the turbo and cylinders of XCMG excavators.
Issued under the official part number 804415212, the filter gives the technician a correctly sized element that matches the housing, seal and end cap it is designed for.
The pleated media and end caps are formed to the XCMG drawing, so the element seats in the air box without twisting or leaving a leak path around the ends.
A matched media grade traps fine dust while letting air flow freely, so the engine breathes well without losing filtration efficiency.
A reinforced center cage and bonded end caps hold the pleats under intake pulses, so the element does not collapse or shed media into the intake.
Every unit is checked for pleat count, media area, seal fit and end cap bond before the batch is packed for shipment.
Fitted to the main air cleaner housing, this filter protects the turbocharger, pistons and rings from abrasive dust on site.
The 804415212 filter is produced to the XCMG drawing, so the diameter, height and seal fit the air box on the first attempt.
A matched media grade traps fine dust, so abrasive grit does not reach the turbo, pistons or rings.
A reinforced center cage holds the pleats under intake pulses, so the element does not collapse or shed media into the engine.
Bonded end caps seal the media edges, so air cannot bypass the filter and carry dust into the intake.
Because the part matches the OEM number, a fitter installs it straight from the box without adapters or extra seals.
Correct pleat spacing keeps airflow steady, so the engine gets the air it needs without high intake restriction.
A sound filter also keeps the oil cleaner, which reduces cylinder wear and extends engine life.
Keeping spare filters on the shelf shortens service time, so a clogged element does not turn into a full day of lost work.
Each lot begins with certified filter media and steel mesh tested for basis weight, strength and dust-holding capacity before pleating.
Elements are pleated and bonded in controlled tooling, so the pleat count, media area and height stay uniform from batch to batch.
Trimmed edges and bonded caps keep the media sealed, so the element does not leak dust around the ends.
Inspectors measure diameter, height, pleat count and seal fit against a gauge made for this exact part number.
Batch records trace every 804415212 filter to its media lot and production run, so a quality question is settled quickly.
An air filter cleans the air before it enters the engine, so dust and grit are removed before they reach the turbo and cylinders.
A clogged or bypassed filter lets dirt into the engine, which scores cylinders, wears rings and causes power loss.
The genuine 804415212 keeps intake air clean, so the engine breathes well and internal parts last longer.
Correct fit avoids both a filter that bypasses dirty air and one that restricts flow and raises intake vacuum.
A sound filter protects the turbo, pistons and rings, which keeps service intervals predictable and extends engine life.
The 804415212 filter is installed with a cleaning cloth, a spanner set and an air nozzle during engine service work.
Open the air cleaner cover, remove the old element and clean the housing so no dirt or leaves enter the intake.
Check the housing, cover and seal faces for damage, rust or old gasket, since a rough surface will stop the element sealing.
Fit the new element with the correct seal, seat it fully and check that the cap and wing nut line up with the housing.
Close the cover and secure the clips or bolts to the service data, so the housing seals without pinching the element.
Start the engine, listen for intake noise and check the restriction indicator, then reset it if the drawing calls for it.
At service intervals, inspect the element and replace it as scheduled, especially on dusty or demolition sites.
Every 804415212 filter is produced in an ISO 9001 and ISO 14001 certified plant with traceability from media to carton.
Incoming media is tested for strength and dust-holding capacity, and finished elements are gauged for diameter, height and pleat count.
Each batch is screened for media damage, bond defects and seal flaws, since these defects cause bypass or media shedding.
Post-production checks include visual review, dimensional verification and a trial fit in the XCMG air box fixture.
Sample filters from each batch undergo efficiency, pressure drop and vibration tests to confirm filtration and strength performance.
Cheap copies often use thin media and weak bonds, so the element collapses or bypasses dust soon after installation.
A filter with the wrong height or seal can sit loose, bypass dirty air or restrict intake flow and raise vacuum.
The genuine 804415212 is made to the XCMG drawing, so diameter, height, media and seal match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM housings.
Backed by XCMG global quality standards and technical support, this air filter performs reliably in harsh conditions.
Choosing the genuine 804415212 filter prevents a small amount of dust from turning into a scored cylinder or a damaged turbo.
A failed filter lets abrasive dust into the engine, which wears rings and liners and shortens engine life.
A correctly made element traps dust firmly, so it does not bypass and does not shed media into the intake.
Reliable filters also keep intake air clean, which improves engine performance and lowers ownership cost.
Service records from construction and mining fleets show genuine XCMG parts cut unplanned downtime.
XCMG produces the 804415212 filter with efficient pleating and bonding runs that keep production scrap low.
A long service life means fewer replacements, which lowers the material and energy tied to each filter.
Clean intake air reduces engine wear and emissions, which protects the environment and extends engine life.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 804415212 filter is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each element is bagged to protect the media and seal and boxed in a strong carton that guards against dust, damp and crushing.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the pleats and end caps undamaged until fitting, avoiding the distortion seen in loose storage.
The XCMG Air Filter 804415212 is a key engine service part on XCMG excavators, cleaning intake air before it reaches the turbo and cylinders.
Its accurate size, correct media and durable construction deliver dependable filtration in rain, dust and heat.
By keeping intake air clean, this filter cuts downtime, protects the engine and extends the life of the machine.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 804415212 filter for dependable intake filtration and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 804415212 – XCMG Air Filter – the definitive intake filter for clean air and a protected engine on your excavator. Pleated to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
