OEM 801976344 The XCMG Emergency Exit 801976344 is a genuine escape window for the cab of XCMG hydraulic excavators, giving the operator a safe second way out.
Issued under the official part number 801976344, the unit arrives framed and glazed, so it fits the cab opening without cutting or welding.
The frame is formed and welded from steel, which keeps the opening square and lets the window close firmly against its seal.
Toughened safety glass fills the frame, so the unit resists vibration in daily work yet breaks out cleanly when escape is needed.
Opening size, mounting holes and latch points follow the XCMG drawing, so the window lines up with the cab roof or rear panel.
A rubber weatherstrip seals all round, which keeps rain, dust and engine noise out of the operator station.
Every unit is checked for frame dimensions, glass quality, latch action and seal fit before the batch is packed for shipment.
The 801976344 unit is built to the XCMG drawing, so the frame size and mounting points fit the cab opening without modification.
Toughened glass resists vibration and impact in normal work but still breaks out quickly once the latch is released.
A quick-release latch lets the operator open the exit with one motion, even when space inside the cab is limited.
The steel frame is formed and welded square, so it presses evenly on the weatherstrip and does not rattle in service.
A rubber weatherstrip seals all round, so rain, dust and noise stay outside the operator station.
Because the part matches the OEM number, the technician restores the factory escape function without adapters or welding.
Correct sealing also keeps the cab climate control working, so the operator does not have to overwork the fan.
A sound escape window keeps the cab compliant with site safety rules, which is essential for passing inspections.
Production starts with certified steel sections, checked for grade, thickness and surface condition before forming.
Frames are bent and welded in hardened fixtures, so the opening stays square and the mounting holes line up.
Toughened glass is checked for thickness, clarity and edge condition, so it seats in the frame without stress or chipping.
Inspectors measure frame length, width, thickness, hole spacing and glass fit on a gauge for this exact part number.
Batch records trace every 801976344 unit to its steel lot and glass supplier, so a quality question is settled quickly.
An emergency exit gives the operator a second way out if the cab door jams after a rollover, impact or fire.
A seized latch or cracked glass can stop the escape working, which turns a minor incident into a serious risk.
The genuine 801976344 keeps the latch free and the glass sound, so the exit works when it is needed.
Correct sealing also stops the cab filling with dust or water, which keeps visibility and comfort steady over the shift.
A sound exit keeps the machine compliant with site safety rules, which protects the operator and the business.
The 801976344 exit is fitted with a torque wrench, sealant and weatherstrip tools during cab repair work.
Remove the old unit, clean the cab opening and check the frame flange for damage, rust or old sealant.
Fit the new weatherstrip, locate the frame on the opening and start all fasteners by hand before tightening.
Tighten the fasteners in a cross pattern to the torque in the service data, so the frame pulls down evenly.
Apply sealant where the drawing requires it, then test the latch and check the window opens freely without binding.
Check the seal all round for gaps and run water over the frame, so any leak is found before the machine goes back to work.
At service intervals, test the latch, look for cracked glass or a loose frame and renew damaged parts early.
Every 801976344 unit is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel to carton.
Incoming steel and glass are checked for grade and thickness, and finished units are gauged for size, holes and glass fit.
Each batch is inspected for weld defects, frame distortion and seal gaps, since these faults cause leaks or jamming.
Post-production checks include visual review, dimensional verification and a trial fit on the XCMG cab fixture.
Sample units from each batch undergo latch and seal tests to confirm the exit opens freely and the cab stays watertight.
Cheap copies often use thin frames or ordinary glass, so the exit rattles, leaks or will not break out cleanly.
A unit with the wrong opening size cannot be sealed, so rain and dust enter the cab and the latch may not engage.
The genuine 801976344 is built to the XCMG drawing, so frame size, glass, latch and seal match the original unit.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps the cab compliant.
Backed by XCMG global quality standards and technical support, this emergency exit performs reliably in harsh conditions.
Choosing the genuine 801976344 unit prevents a leaking or jammed exit from failing a safety inspection on site.
A seized latch or cracked glass is a serious hazard, and fixing it later costs far more than a proper replacement.
A sealed, well-fitted unit keeps the cab dry and quiet, so the operator works comfortably and stays productive.
Reliable escape windows keep the machine compliant, which avoids site shutdowns and protects the business.
Service records from construction and mining fleets show genuine XCMG cab parts cut unplanned downtime.
XCMG builds the 801976344 unit with efficient forming and glazing runs that keep production scrap low.
A long service life means fewer replacements, which reduces the steel, glass and energy tied to each unit.
A tight seal prevents water and dust from entering, which protects cab components and reduces waste.
The materials in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 801976344 emergency exit is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each unit is packed with protective material and boxed in a strong carton that guards the glass against impact in transit.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the frame square and the glass intact until fitting, avoiding the damage seen in loose storage.
The XCMG Emergency Exit 801976344 is a key safety component on XCMG excavators, giving the operator a second way out of the cab.
Its square frame, toughened glass and quick-release latch deliver dependable escape in hot, wet and dusty conditions.
By keeping the exit working and the cab sealed, this unit cuts inspection delays, protects the operator and extends cab life.
Purchase only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 801976344 emergency exit for dependable cab safety and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 801976344 – XCMG Emergency Exit – the definitive cab escape window for operator safety and a sealed, quiet cab on your excavator. Built to the drawing, glazed and latched for quick escape, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
