OEM 860178164 The XCMG Cylindrical Roller Bearing 860178164 is a genuine OEM radial bearing that carries high radial load on a shaft inside the swing or travel reduction gearbox of XCMG hydraulic excavators.
Stamped with part number 860178164, this factory bearing gives technicians a correctly sized and correctly toleranced unit that seats on the shaft and in the housing without shimming.
It is built with an inner ring, outer ring and a cage of cylindrical rollers, all machined from bearing-grade steel and hardened to the specified range.
Exact bore, outer diameter and width match the XCMG drawing, so the bearing fits the journal and housing with the designed interference and clearance.
Cylindrical rollers contact the raceway along a line, which gives high radial capacity and resists the shock load of digging and swinging.
Every bearing is checked for clearance, runout and noise before packing, so the part received matches the factory specification exactly.
The 860178164 bearing is made from bearing-grade hardened chrome steel, so the raceways resist wear and rolling contact fatigue under load.
Cylindrical rollers contact the raceway along a line, which gives high radial capacity and handles the shock load of digging.
Exact bore, outer diameter and width match the XCMG drawing, so the bearing fits the journal and housing with the designed fit.
Controlled radial clearance keeps the shaft running true, which reduces vibration and prevents uneven roller load.
A sturdy cage holds the rollers evenly spaced, which keeps rotation smooth and prevents skewing at operating speed.
Grinding and inspection keep runout low, so the bearing runs quiet and the gearbox noise level stays as designed.
An anti-corrosion oil coating protects the bearing in storage, so it arrives free of rust and ready for installation.
Production starts with certified bearing steel checked for grade, hardenability and internal soundness before turning.
Rings and rollers are hardened, then ground on precision machines that hold bore, diameter and raceway profile to tolerance.
Rollers are sorted by diameter so the clearance stays within the specified band when the bearing is assembled.
Inspectors check clearance, runout and noise against a test stand made for this part number.
Batch records trace every 860178164 bearing to its steel heat and grinding program, so a quality question is settled quickly.
The bearing supports a rotating shaft inside the gearbox, carrying radial load while allowing the shaft to spin freely.
A worn bearing causes vibration, noise and shaft play, and it can damage the gears, seals and housing if left in service.
The genuine 860178164 holds the shaft in the correct position, so gear mesh stays aligned and seals are not distorted.
Correct clearance from accurate grinding prevents overheating and binding, which extends the life of the bearing and lubricant.
A sound bearing keeps swing and travel smooth, which protects the gear train and reduces unplanned downtime.
The 860178164 bearing installs with a bearing heater, press and hand tools during gearbox service.
Drain the gearbox oil, remove the cover and take out the shaft and old bearing before cleaning the journal and housing.
Inspect the journal and housing bore for wear or scoring, and replace any part that no longer meets the specified fit.
Heat the new bearing evenly if an interference fit is specified, then press it onto the shaft until it seats against the shoulder.
Check that the bearing turns freely and that end play falls within the specification before closing the housing.
Refill with the specified gear oil, run the machine slowly, and listen for unusual noise during the first cycles.
At service intervals, check oil condition and listen for bearing noise; replace the bearing if roughness or play appears.
Every 860178164 bearing is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel to packed carton.
Incoming steel is tested for grade and hardenability, and finished bearings are measured for bore, outer diameter and width.
Clearance is checked on a gauge, and runout and noise are verified so the bearing meets the specified range.
Post-production checks include visual inspection, dimensional verification and a trial fit on the XCMG gearbox fixture.
Sample bearings from each batch undergo load, fatigue and salt spray tests to confirm long-term performance.
Cheap copies often use lower-grade steel and loose clearance, so the bearing runs noisy and wears out within a short time.
A bearing with the wrong bore or outer diameter forces the shaft out of position, which damages gears and seals.
The genuine 860178164 is built to the XCMG drawing, so bore, outer diameter, width and clearance match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps compatibility with other OEM components.
Backed by XCMG global quality standards and technical support, this bearing performs reliably in harsh conditions.
Choosing the genuine 860178164 bearing prevents a small noise or play from turning into a full gearbox rebuild.
A failed bearing can seize the shaft and damage the gears, seals and housing, which stops the machine for days.
Proper steel grade and accurate grinding keep the bearing working across a long life, which reduces replacement frequency.
Reliable shaft support also extends gear, seal and oil life, lowering the total cost of ownership for fleet operators.
Service records from construction and mining fleets show genuine XCMG drive parts cut unplanned downtime.
XCMG builds the 860178164 bearing with efficient grinding programs and controlled assembly that keep material scrap low.
A long working life means fewer replacements, which lowers the raw material and energy tied to each bearing.
Preventing oil leaks around the gearbox protects soil and groundwater, helping operators meet site regulations.
The steel and coating in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 860178164 cylindrical roller bearing is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each bearing is wrapped in rust-preventive material and boxed in a strong carton that guards against impact and damp.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams help cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the bearing in factory condition until fitting, avoiding the raceway damage seen in loose stock.
The XCMG Cylindrical Roller Bearing 860178164 is a key drive component on XCMG excavators, supporting a shaft inside the swing or travel gearbox.
Its hardened chrome steel, ground raceways and accurate clearance deliver dependable radial support in hot, wet and dusty conditions.
By keeping the shaft true and the gear mesh aligned, this bearing cuts vibration, lowers repair bills and extends gearbox life.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 860178164 bearing for dependable shaft support and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 860178164 – XCMG Cylindrical Roller Bearing – the definitive cylindrical roller bearing for reliable shaft support in your excavator reduction gearbox. Ground to the drawing, hardened for durability, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
