OEM 860178195 The XCMG Washer 860178195 is a genuine OEM flat washer that spreads clamping load under a fastener and protects the mating surface inside the swing or travel reduction gearbox of XCMG hydraulic excavators.
Stamped with part number 860178195, this factory washer gives technicians a correctly sized and correctly hardened spacer that seats under the original bolt or nut without filing or reaming.
It is stamped or machined from quality steel strip, then deburred, heat treated where specified and finished with an anti-corrosion coating.
Exact inner diameter, outer diameter and thickness match the XCMG drawing, so the washer clears the fastener shank and still covers the full bearing face.
A flat, uniform washer spreads bolt load over a wider area, which prevents the housing or cover face from deforming and keeps the joint tight under vibration.
Every washer is gauged for diameter, thickness and flatness before packing, so the part received matches the factory specification exactly.
The 860178195 washer is stamped to the XCMG drawing, so inner diameter, outer diameter and thickness match the original fastener and seat face.
A flat, uniform body spreads clamping load across the full bearing face, which prevents the housing surface from denting under torque.
Deburred edges protect the machined face and the coating underneath, so no sharp lip starts a crack or a corrosion point.
Correct hardness lets the washer resist crushing at high bolt load while still conforming slightly to keep the joint tight.
An anti-corrosion finish keeps the washer from rusting into the housing face, so future disassembly stays straightforward.
Because the size matches the OEM part, a technician reuses the original bolt and simply fits a new washer during reassembly.
A clean, flat washer also keeps torque readings accurate, so fasteners reach the specified value the first time.
Production starts with certified steel strip checked for thickness, hardness and surface condition before stamping.
Press tools cut the blank to the drawing diameter, and deburring removes the sharp edge left by the punch.
Heat treatment is applied where the specification calls for it, and hardness is verified on samples from the batch.
Inspectors check inner diameter, outer diameter, thickness and flatness against a gauge made for this part number.
Batch records trace every 860178195 washer to its steel coil and press tool, so a quality question is settled quickly.
The washer sits between the fastener head and the housing face, spreading load so the surface does not deform under torque.
Without a proper washer, bolt load concentrates on a small ring, which dents the housing and lets the joint loosen in service.
The genuine 860178195 keeps the clamping force even, so the bolted joint stays tight through vibration and thermal cycling.
Correct thickness restores the designed grip length, so the bolt is neither bottoming out nor left short of full engagement.
A sound washer protects the housing face and the fastener, which keeps the gearbox assembly serviceable for the long term.
The 860178195 washer installs with a socket set and torque wrench during scheduled service or repair.
Release system pressure and clean the area around the fastener before loosening it, so grit cannot fall into the joint.
Remove the fastener, lift out the old washer and check the housing face for burrs, corrosion or dents that could break the seal.
Fit the new washer flat against the face, then thread the bolt in by hand before applying torque in the specified sequence.
Check that the washer has not shifted off-centre, since an offset washer reduces the bearing area and can loosen later.
Run the machine and recheck torque after the first operating cycle, because seating can relax the joint slightly.
At service intervals, inspect washers for flattening, rust or cracking and replace them whenever a fastener is removed.
Every 860178195 washer is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel coil to packed carton.
Incoming strip is tested for thickness and grade, and finished washers are gauged for inner diameter, outer diameter and thickness.
Flatness is checked on a surface plate, and hardness is verified on samples so the washer meets the specified range.
Post-production checks include visual inspection, dimensional verification and a trial fit under the original fastener.
Sample washers from each batch undergo compression, salt spray and vibration tests to confirm long-term performance.
Cheap copies often use thin strip and loose tolerance, so the washer crushes flat and the joint loosens within a few shifts.
A washer with the wrong inner or outer diameter leaves part of the bearing face uncovered, which dents the housing under torque.
The genuine 860178195 is stamped to the XCMG drawing, so diameters, thickness and hardness match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps compatibility with other OEM components.
Backed by XCMG global quality standards and technical support, this washer performs reliably in harsh conditions.
Choosing the genuine 860178195 washer prevents a small joint problem from turning into an expensive housing or gearbox repair.
A crushed washer lets the fastener lose preload, which allows the housing to fret and the bearing alignment to drift.
Correct strip thickness and reliable plating keep the washer working across a long life, which reduces replacement frequency.
Reliable joints also extend bolt, bearing and oil life, lowering the total cost of ownership for fleet operators.
Service records from construction and mining fleets show genuine XCMG fastening parts cut unplanned downtime.
XCMG builds the 860178195 washer with efficient nesting and controlled stamping that keep material scrap low.
A long working life means fewer replacements, which lowers the raw material and energy tied to each washer.
Keeping joints tight prevents oil leaks that would otherwise reach soil and groundwater on sensitive sites.
The steel and plating in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 860178195 washer is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each washer is bagged and boxed in a strong carton that guards against bending, dust and damp during transport.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams help cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the washer flat and clean until fitting, avoiding the distortion seen in badly stored stock.
The XCMG Washer 860178195 is a small but essential fastening part on XCMG excavators, spreading bolt load and protecting the housing face.
Its correct diameter, thickness and hardness deliver dependable joint performance in hot, wet and dusty conditions.
By keeping bolted joints tight and surfaces undamaged, this washer cuts downtime, lowers repair bills and extends assembly life.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 860178195 washer for dependable clamping and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 860178195 – XCMG Washer – the definitive washer for even clamping load and surface protection on your excavator. Stamped to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
