OEM 860178180 The XCMG Method Flange 860178180 is a genuine mounting flange that joins a hydraulic component to its housing on XCMG excavators.
Issued under the official part number 860178180, the flange gives technicians a correctly machined interface that lines up with the bolt pattern and bore.
The body is machined from steel plate or bar, so the mounting face, spigot and bolt holes stay true to the drawing.
Bolt circle, face diameter and thickness follow the XCMG drawing, so the flange seats flat without shims or reaming.
A protective coating resists corrosion, which keeps the mounting faces clean and stops rust bleed on the casting.
Every flange is checked for bolt pattern, face flatness, bore size and surface finish before the batch is packed.
Used on pump mounts, motor mounts, valve blocks and hose connections, this flange keeps joints aligned and leak-free.
The 860178180 flange is machined to the XCMG drawing, so the bolt circle, spigot and thickness match the mating housing.
A flat mounting face seats squarely on the casting, so the O-ring or gasket compresses evenly and does not leak.
Bolt holes are drilled and deburred to the drawing, so the fasteners slide in and clamp the flange without reaming.
Correct spigot diameter centres the flange on the bore, which keeps the component aligned and stops side loading.
The steel body takes full bolt torque without distorting, so the joint stays tight through pressure pulses and vibration.
A protective coating slows rust, so the faces stay clean and the fasteners come out easily at the next service.
Because the number matches the OEM part, a fitter installs it straight from the bag without machining or fitting shims.
A sound flange keeps the pump, motor or valve square to its mount, which reduces vibration and extends seal life.
Production starts with certified steel plate or bar, checked for grade, thickness and surface condition before machining.
Blanks are turned and milled on CNC equipment, so the face, spigot and bolt circle are cut true to the drawing.
Bolt holes are drilled on a fixed pattern and deburred, so fasteners seat flat and the flange pulls down evenly.
Inspectors measure bolt circle, hole size, spigot diameter, thickness and face flatness on a gauge for this part number.
Batch records trace every 860178180 flange to its steel lot and machining run, so a quality question is settled quickly.
A flange provides a flat, rigid face that holds a hydraulic component square to its housing and carries the clamp load.
A warped or wrong-sized flange lets the seal seat unevenly, which causes weeping, fretting and a loose mount.
The genuine 860178180 keeps the joint square and tight, so seals work as designed and fasteners stay at torque.
Correct spigot fit prevents side load on the component shaft, which is a common cause of bearing and seal wear.
A sound flange protects pumps, motors and valves, which keeps maintenance intervals predictable and extends life.
The 860178180 flange is fitted with a torque wrench, socket set and a new seal kit during hydraulic service work.
Release system pressure, drain the affected line and clean the joint so no dirt enters the circuit during the repair.
Clean the mounting face and check for burrs, scoring or old gasket, since any high spot will tilt the flange.
Fit the new seal, locate the flange on its spigot and start all fasteners by hand before tightening any of them.
Tighten the fasteners in a cross pattern to the torque in the service data, so the flange pulls down evenly.
Refill with the specified oil, run the machine slowly and check the joint for weeping after the first pressure cycles.
At service intervals, check for oil film, loose fasteners or rust around the flange and renew damaged parts early.
Every 860178180 flange is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel to carton.
Incoming steel is checked for grade and thickness, and finished flanges are gauged for bolt circle, holes and thickness.
Each batch is inspected for burrs, cracks and machining marks, since sharp edges damage seals and mating faces.
Post-production checks include visual review, dimensional verification and a trial fit on the XCMG housing fixture.
Sample flanges from each batch undergo coating and pressure checks to confirm sealing and corrosion performance.
Cheap copies often have rough or offset bolt holes, so the flange cannot be pulled down evenly and the joint leaks.
A flange with the wrong spigot diameter sits off centre, which puts side load on the shaft and wears the seal.
The genuine 860178180 is machined to the XCMG drawing, so bolt circle, spigot, thickness and finish match the original.
Using genuine XCMG parts also preserves warranty coverage, protects resale value and keeps fit with OEM housings.
Backed by XCMG global quality standards and technical support, this flange performs reliably in harsh conditions.
Choosing the genuine 860178180 flange prevents a small leak from turning into a damaged pump or motor housing.
A misaligned flange wears the seal and shaft, which can stop the machine and contaminate the whole oil circuit.
A coated, correctly machined flange comes apart cleanly at the next service, so fasteners and threads survive reuse.
Reliable mounting also extends seal and bearing life, which lowers the total cost of ownership for fleet operators.
Service records from construction and mining fleets show genuine XCMG hydraulic parts cut unplanned downtime.
XCMG builds the 860178180 flange with efficient machining runs and tight material control that keep scrap low.
A long working life means fewer replacements, which lowers the steel and energy tied to each flange.
Stopping joint leaks protects soil and groundwater, helping operators meet rules on environmentally sensitive sites.
The steel in this part complies with RoHS and REACH requirements for safe handling and responsible recycling.
The 860178180 flange is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each flange is bagged to protect the machined faces and boxed in a strong carton that guards against damp and impact.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams cover urgent requests fast, so machines return to work sooner.
Careful packing keeps faces flat and edges undamaged until fitting, avoiding the burrs seen in loose storage.
The XCMG Method Flange 860178180 is a key mounting part on XCMG excavators, holding hydraulic components square to their housings.
Its accurate bolt circle, true spigot and flat face deliver dependable sealing in hot, wet and dusty conditions.
By keeping joints aligned and tight, this flange cuts downtime, protects seals and bearings and extends assembly life.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 860178180 method flange for dependable mounting and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 860178180 – XCMG Method Flange – the definitive mounting flange for a square, tight hydraulic joint on your excavator. Machined to the drawing, finished for a precise fit, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
