OEM 319007787 The XCMG Bracket 319007787 is a genuine OEM mounting bracket that locks hydraulic lines and machine components into their designed position on XCMG hydraulic excavators.
Stamped with part number 319007787, this factory bracket gives fitters a rigid, correctly shaped support that bolts to the original frame points.
The part is pressed and formed from structural steel plate, then coated so it keeps its strength against mud, moisture, salt and site chemicals.
Exact plate thickness, hole spacing and bend angles allow direct replacement, with no drilling, welding or improvised shims.
Holding the line at the correct height keeps it clear of sharp edges and hot surfaces, which is where most chafing damage starts.
Each bracket is gauged and trial fitted before packing, so the unit that arrives at your workshop matches the XCMG drawing without adjustment.
The 319007787 bracket is formed from structural steel that keeps its angle when a loaded line pushes against the mounting face.
Its hole pattern copies the OEM design, so the bracket fastens to the frame without reaming, filing or enlarging any opening.
A bonded anti-corrosion coating holds up to mud, water and salt spray, which are everyday conditions on earthmoving sites.
Welds are inspected for penetration and squareness, so the part stays true through vibration and repeated load cycles.
The correct offset keeps hoses and pipes away from frame edges, which removes a common starting point for abrasion.
Exact geometry eliminates field fabrication and spacer stacks, so a routine replacement takes minutes instead of hours.
A clean painted finish helps inspection, because rust bloom or a loose bolt shows up clearly against the coated surface.
Production begins with certified steel plate checked for thickness, flatness, hardness and surface condition before cutting.
Blanks are laser cut or punched, then bent on press brakes that repeat the XCMG drawing angles within tight tolerance.
Welding follows a qualified procedure, and every joint is checked for bead size, penetration and spatter before coating.
Inspectors compare hole positions, bend angles and overall dimensions against a checking fixture made for this part number.
Batch records link each 319007787 bracket to its steel heat number and forming program, so a question is traced and closed fast.
The bracket ties a hydraulic hose or pipe to the machine frame, so the line keeps its route through every working cycle.
A weak or missing bracket lets the line swing and rub, which wears the cover away and exposes the pressure-carrying layers.
The genuine 319007787 holds the line at the designed height, so clearance to linkages and hot parts is never lost.
Steady support also reduces strain at the fittings, which lowers the chance of weeping joints and loosened nuts.
Sound line retention protects pumps, valves and cylinders, which keeps cycle times and machine availability stable.
The 319007787 bracket installs with a socket set and torque wrench during scheduled hydraulic or structural service.
Release hydraulic pressure, stop the engine and support the line before removing the bracket fasteners.
Take off the old bracket, clean the mounting face and inspect frame threads for corrosion, damage or cross-threading.
Seat the new bracket, thread all bolts by hand first, then torque them in a diagonal order to the specified value.
Refit the clamps and cushion strips, check the line sits flat on the bracket, and confirm clearance to moving parts.
Run the engine, cycle each function slowly, and watch the bracket and nearby lines for shifting or rubbing.
At service intervals, recheck bolt torque and look for chipped paint, rust bloom or a bent bracket body.
Every 319007787 bracket is built in an ISO 9001 and ISO 14001 certified plant with records from steel to sealed carton.
Incoming plate is tested for thickness and grade, and finished brackets are gauged for holes, bend angles and flatness.
During production, press force, fixture position and coating thickness are logged so each unit matches the reference sample.
Final checks cover appearance, dimensions and a trial fit on the XCMG mounting fixture used for this machine family.
Sample brackets from each batch go through load, salt spray and vibration tests to prove long-term performance.
Cheap copies often use thin plate that bends the first time a pressure line kicks and rusts through in one wet season.
A bracket with the wrong offset or hole pattern forces bolts into misalignment, which damages threads and loosens the fixing.
The genuine 319007787 is formed to the XCMG drawing, so thickness, hole pattern and angles mirror the original part.
Staying with genuine XCMG parts keeps warranty cover intact, protects resale value and avoids clashes with other OEM items.
Every bracket carries XCMG global quality standards and technical backing, so it works through long shifts on hard ground.
Fitting the genuine 319007787 bracket stops a small rub from growing into a costly hydraulic hose replacement.
When a bracket gives way, the line can wear through and dump oil fast, which can take out a pump in minutes.
Proper steel thickness and sound coating keep the bracket working over a long life, which reduces replacement frequency.
Reliable line support also lengthens hose, seal and oil life, which trims the total cost of ownership for fleet owners.
Maintenance logs from quarry and construction fleets show genuine XCMG parts reduce unplanned stoppages.
XCMG builds the 319007787 bracket with efficient nesting and controlled stamping that keep material scrap low.
A long working life means fewer replacements, which lowers the raw material and energy tied to each bracket.
Containing hydraulic leaks protects soil and groundwater, helping operators meet rules on sensitive job sites.
The steel and coating in this part comply with RoHS and REACH requirements for safe handling and responsible recycling.
The 319007787 bracket is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each bracket is wrapped and boxed in strong cartons that guard against bending, dust and damp during transport.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams help cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the bracket in factory condition until fitting, avoiding the deformation seen in badly stored stock.
The XCMG Bracket 319007787 is a key support part on XCMG excavators, holding hydraulic lines at the correct height and angle.
Its structural steel body, solid welds and anti-corrosion coating deliver dependable support in hot, wet and dusty conditions.
By blocking chafing and fatigue, this bracket cuts downtime, lowers repair bills and adds service life to the line.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 319007787 bracket for a dependable hold and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 319007787 – XCMG Bracket – the definitive mounting bracket for hydraulic line support on your excavator. Built for strength, formed for exact fitment, and supported by global quality standards. Trust the original to protect your investment and keep uptime high.
