OEM 800164283 The XCMG Air Hose 800164283 is a genuine OEM air hose that supplies clean compressed air to the valves and actuators of XCMG hydraulic excavators.
Carrying part number 800164283, this factory hose gives technicians a flexible, sealed line that holds pressure through heat, vibration and long shifts.
The tube is formed from air-resistant synthetic rubber, wrapped in a woven braid, and covered with a tough outer skin for abrasion protection.
Exact bore, working length and end fittings let the hose clip onto the original nipples without cutting, extra clamps or adapters.
A tight, flexible line prevents air loss, so brake release, air controls and attachments get full pressure right when the operator needs it.
Every hose is pressure tested and measured before packing, so the part that reaches your workshop matches the XCMG drawing exactly.
The 800164283 air hose is built from air-resistant rubber that stays pliable in cold starts and holds strength near a hot engine.
Its textile braid absorbs compressor pulses, so the hose does not balloon, bulge or pull off the nipples under load.
The pre-shaped route follows the factory layout, so the hose clears covers, brackets and pulleys without rubbing.
A dense outer cover resists grit, oil mist and vibration, which are the usual causes of surface cracks and pinholes.
Correct bore and length let the original clamps and fittings seat properly, so the joint seals without extra tape or sealant.
Flexible construction absorbs engine shake, which lowers stress on compressor outlets and air valve fittings.
A leak-free air line keeps brake and control response crisp, which makes the machine safer and more productive.
Production starts with certified rubber compound tested for hardness, tensile strength, air permeability and heat ageing.
The tube and braid are built on a mandrel that matches the OEM route, so the cured hose keeps its shape and full bore.
Vulcanization fuses tube, braid and cover into one strong wall, and trimming removes flash from both ends.
Inspectors check bore, length, wall thickness and surface quality on samples pulled from every curing batch.
Batch records trace each 800164283 hose back to its compound lot and press number, so quality questions are resolved quickly.
This air hose links the compressor and receiver to air valves and actuators, giving controlled pressure wherever it is needed.
A cracked or loose air hose bleeds pressure, which slows brake release, weakens air controls and wastes compressor effort.
The genuine 800164283 holds pressure tight, so functions respond promptly and the compressor cycles less often.
Correct routing away from hot manifolds and sharp edges stops the rubber from baking or chafing, which extends life.
Steady air supply protects valves, cylinders and brake chambers, which keeps cycle times and uptime predictable.
The 800164283 air hose installs with hose clamp pliers and standard hand tools during scheduled service.
Drain the air system fully, stop the engine and release residual pressure before loosening any fitting.
Remove the old hose, clean both nipples and check for corrosion, cracks or flattened beads that could leak.
Slide the new hose fully onto each nipple without twisting it, then set the clamps squarely behind the bead.
Pressurize the system, listen for hissing and brush soapy water on both joints to confirm a tight seal.
At service intervals, squeeze the hose and look for soft spots, glazing or fine cracks along the bend.
Replace the hose at the first sign of hardening, because a burst air line can disable brakes or controls on site.
Every 800164283 hose is produced in an ISO 9001 and ISO 14001 certified plant with traceability from compound to packed carton.
Incoming rubber is tested for hardness and air permeability, and finished hoses are gauged for bore, length and wall thickness.
During production, curing time, steam temperature and mandrel condition are monitored so each hose keeps its molded shape.
Post-production checks include visual inspection, dimensional verification and a trial fit on the XCMG air line fixture.
Sample hoses from each batch undergo pressure, burst and heat ageing tests to confirm long-term performance.
Cheap copies often use low-grade rubber that hardens within a season and splits along the bend under engine heat.
A hose with the wrong bore or length can kink after fitting, which chokes air flow and causes slow, spongy response.
The genuine 800164283 follows the XCMG drawing, so bore, length, route and compound match the original exactly.
Sticking with genuine XCMG parts keeps warranty cover intact, protects resale value and avoids clashes with other OEM items.
Every hose carries XCMG global quality standards and technical backing, so it works through long shifts in harsh ground.
Fitting the genuine 800164283 hose stops a small air leak from growing into a major system repair.
A burst air line can disable brakes or controls, which halts production and puts the crew at risk.
Sound rubber and correct reinforcement keep the hose working over a long life, which cuts how often it must be replaced.
Reliable air supply also extends compressor, valve and seal life, which trims the total cost of ownership for fleets.
Maintenance logs from quarry and construction fleets show genuine XCMG parts reduce unplanned stoppages.
XCMG builds the 800164283 hose with efficient mandrel cycles and tight material control that keep production scrap low.
A long working life means fewer replacements, which lowers the raw material and energy tied to each hose.
Preventing air leaks keeps the compressor from running longer than needed, which saves fuel and reduces emissions.
The rubber in this part complies with RoHS and REACH requirements for safe handling and responsible disposal.
The 800164283 air hose is stocked in XCMG depots serving North America, Europe, Asia and Australia.
Each hose is sleeved and boxed in strong cartons that guard against kinking, dust and sunlight during transport.
Fleet buyers can request volume pricing and combined freight, which simplifies planning and lowers landed cost.
Live stock data and responsive supply teams help cover urgent requests fast, so machines return to work sooner.
Careful packing keeps the hose in factory condition until fitting, avoiding the flattening seen in badly stored stock.
The XCMG Air Hose 800164283 is a key supply part on XCMG excavators, linking the compressor, tank and air control circuits.
Its air-resistant tube, textile braid and tough cover deliver dependable pressure in hot, wet and dusty conditions.
By preventing air loss and chafing, this hose cuts downtime, lowers repair bills and keeps controls responsive.
Buy only genuine XCMG parts from authorised dealers to secure real quality, correct fitment and lasting performance.
Specify the 800164283 air hose for a dependable connection and confident, trouble-free servicing.
Work with XCMG, a trusted supplier of engine and hydraulic components for heavy equipment that delivers real value.
OEM 800164283 – XCMG Air Hose – the definitive air hose for compressed-air supply on your excavator. Built for pressure and heat resistance, shaped for exact fitment, and supported by global quality standards. Trust the original to protect your investment and keep uptime high.
