OEM 800167011 The XCMG Locating Pin 800167011 is a genuine OEM alignment pin engineered to position mating structural parts with high accuracy on XCMG hydraulic excavators.
Identified by part number 800167011, this factory-machined pin fixes the exact location of brackets, plates, and covers before retaining bolts are tightened.
It is machined from high-strength steel, ground to a precision diameter, and coated with a protective finish that resists corrosion and surface wear.
Exact OEM diameter, length, and chamfer allow direct replacement without reaming, filing, or enlarging the mounting bore on site.
By taking shear load off the bolts, this locating pin keeps joints aligned and prevents loosening caused by heavy digging vibration.
The 800167011 Locating Pin is turned and ground from high-strength steel that resists shear, bending, and surface wear under heavy machine load.
Diameter is held to a precision fit, so the pin enters the mating bore cleanly and removes all play between the joined parts.
A chamfered lead-in guides the pin straight into the hole, which speeds assembly and prevents edge galling on the bore.
A zinc or oxide coating protects the steel from moisture, mud, and salt, keeping the pin rust-free during long outdoor service.
Because the pin carries shear load, the surrounding bolts keep their clamp force instead of loosening under constant vibration.
Exact OEM dimensions allow direct replacement, so components line up as designed and no reaming or hole correction is needed.
Production starts with certified steel bar stock checked for chemical composition, hardness, and diameter before machining begins.
CNC turning forms the body and chamfer, then cylindrical grinding brings the pin diameter into the tolerance band set by the XCMG drawing.
Surface roughness is monitored because a smooth pin seats without scoring the bore, while a controlled finish holds the fit over time.
Inspectors measure diameter, length, chamfer angle, and straightness with calibrated gauges on a sampling basis throughout the run.
Traceability records link each 800167011 pin to its steel lot and machining batch, so any deviation can be identified and corrected.
Bolts clamp parts together, but they are not designed to locate them precisely under shear load.
Without a locating pin, mating parts can shift slightly, which increases bolt stress and leads to fretting, oval holes, and loose joints.
The genuine 800167011 fixes the position first, so bolts only provide clamp force and the joint stays aligned through vibration.
Accurate location also keeps brackets and covers in their designed position, which protects seals, hose routing, and clearances.
Correct alignment reduces wear at mating faces, lowers noise, and makes future disassembly and reassembly faster and more predictable.
The 800167011 Locating Pin installs with standard hand tools, keeping downtime and labour costs low during scheduled service.
Park the excavator on firm level ground, lower the attachment, release hydraulic pressure, and lock out the machine before work.
Clean both bores and remove burrs, rust, or paint so the pin enters smoothly and seats to full depth without binding.
Align the mating holes, insert the pin by hand or with a soft mallet, and press it home until the shoulder contacts the surface.
Fit the retaining bolts and tighten them to the torque value listed in the workshop manual, then confirm there is no play.
During routine maintenance, check pins for looseness, rust, or wear marks, and replace any pin that no longer holds alignment.
Every 800167011 pin is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel bar to packed product.
Incoming steel is tested for hardness and composition, and finished pins are checked for diameter, length, and chamfer geometry.
During production, gauge checks are performed at set intervals so diameter drift is corrected before the batch is completed.
Post-production checks include visual inspection, coating thickness measurement, and a trial fit in the XCMG alignment fixture.
Sample pins from each batch undergo shear and salt spray testing to confirm strength and corrosion resistance in field conditions.
Generic pins often use softer steel or loose diameter tolerance, so they wear, shear, or allow the joint to shift.
A pin that is undersized lets components move, which overloads bolts and can enlarge the hole in a soft casting.
The genuine 800167011 is machined to the XCMG drawing, so diameter, hardness, and length match the original part exactly.
Using genuine XCMG parts also preserves warranty coverage, protects resale value, and maintains compatibility with other components.
Backed by XCMG quality standards and technical support, this locating pin delivers dependable alignment in harsh conditions.
Choosing the genuine 800167011 pin prevents small alignment errors from turning into expensive structural or hydraulic repairs.
A worn pin lets brackets move, and moving brackets can chafe hoses, misalign covers, and crack mounting welds.
Durable steel and proper coating keep fit and alignment consistent across a long service life, reducing replacement frequency.
Reliable alignment also extends bolt, bracket, and panel life, lowering the total cost of ownership for fleet operators.
Fleet records show genuine XCMG hardware reduces rework and repeat torque checks after major component repairs.
XCMG applies sustainable manufacturing to the 800167011 pin through recyclable steel content and efficient machining processes.
The long service life of the pin reduces material waste and lowers the environmental footprint of replacement parts over time.
Keeping joints aligned prevents hose and seal damage, which supports cleaner operation on sensitive construction sites.
Steel and coating materials in this component meet RoHS and REACH rules for safe handling and responsible disposal.
The 800167011 Locating Pin is held in XCMG regional distribution centres across North America, Europe, Asia, and Australia.
Each pin is bagged and packed in a sturdy carton that protects it from moisture, dust, and impact during transport and storage.
For fleet-wide orders, XCMG provides volume pricing and consolidated freight options that simplify planning and reduce cost.
Real-time stock visibility and dedicated supply chain support help fill urgent requests quickly, shortening downtime on active projects.
Robust packaging preserves factory condition until installation, preventing coating damage and edge burrs common in stored spares.
The XCMG 800167011 Locating Pin is a vital alignment component for XCMG excavators, fixing mating parts precisely in demanding conditions.
Its high-strength steel body, precision ground diameter, and protective coating deliver dependable fit in hot, wet, and dusty environments.
By keeping joints aligned and relieving shear load from bolts, this pin reduces downtime, lowers maintenance costs, and extends machine life.
Always purchase genuine XCMG parts from authorised dealers to guarantee authenticity, quality, and performance for your equipment fleet.
Choose the 800167011 Locating Pin for dependable alignment and lasting operational peace of mind.
Partner with XCMG, your trusted source for heavy equipment structural and hydraulic components that deliver real value.
OEM 800167011 – XCMG Locating Pin – the definitive alignment pin for your excavator brackets, plates, and structural joints. Engineered for precise fit, designed for exact fitment, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
