OEM 800169193 The XCMG Thermostat Bracket 800169193 is a genuine OEM mounting bracket engineered to hold the thermostat housing and related coolant parts securely on XCMG hydraulic excavators.
Identified by part number 800169193, this factory-formed bracket fixes the thermostat assembly to the engine block so the coolant path stays aligned.
It is stamped from high-strength steel, formed on calibrated dies, and finished with a protective coating that resists heat, coolant, and corrosion.
Exact OEM hole spacing, thickness, and bend geometry allow a direct bolt-on replacement without drilling, bending, or adding spacers.
By holding the thermostat housing rigid and correctly positioned, this bracket prevents gasket misalignment, hose stress, and coolant leaks.
The 800169193 Thermostat Bracket is formed from high-strength steel plate that resists bending and cracking under engine vibration and heat cycling.
Precision laser cutting creates accurate mounting holes, so the bracket lines up with the thermostat housing and engine block on the first attempt.
The bend geometry matches the OEM clearance profile, keeping the bracket clear of hoses, belts, and hot exhaust surfaces.
A multi-layer coating resists rust, coolant splash, and mud, which keeps the bracket strong and the bolt threads clean.
Rigid support keeps the thermostat housing square on its gasket, so the seal compresses evenly and coolant stays inside the circuit.
Exact OEM dimensions allow direct replacement with standard tools, which shortens repair time and reduces labour cost.
Production starts with certified steel plate checked for thickness, hardness, and chemical composition before cutting begins.
Laser cutting produces clean edges and accurate hole positions, then press forming adds the correct bends and stiffening features.
Edges are deburred so the bracket will not cut hoses, wiring, or technician hands during installation and service work.
After cleaning, the bracket is primed and top coated, then inspected for coverage, adhesion, and dimensional accuracy.
Batch records let XCMG trace each 800169193 bracket back to its steel lot and forming run, so quality questions are resolved quickly.
The thermostat bracket is a small structural part, but it controls how the thermostat housing sits against the engine block.
When the bracket is bent or missing, the housing can tilt, which pinches the gasket and opens a coolant leak path.
The genuine 800169193 holds the housing flat and square, so the gasket compresses evenly and the thermostat valve seats correctly.
Rigid support also reduces vibration at the housing, which protects the thermostat, sensor threads, and hose connections.
Correct alignment keeps coolant flow stable, so the engine warms up evenly and holds its designed operating temperature.
The 800169193 Thermostat Bracket installs with standard hand tools, keeping downtime and labour costs low during cooling system service.
Let the engine cool completely, release cooling system pressure, and disconnect the battery before starting work.
Remove the thermostat housing, clean the mounting area, and inspect the block surface for burrs, rust, or distortion.
Position the bracket on its mounting points, install the bolts by hand, and check that the housing sits flat without tension.
Tighten the bolts to the torque value in the workshop manual, refit the housing and gasket, and refill with coolant.
During routine maintenance, check the bracket for cracks, corrosion, and loose bolts, and replace any damaged part promptly.
Every 800169193 bracket is produced in an ISO 9001 and ISO 14001 certified plant with traceability from steel plate to packed carton.
Incoming steel is checked for thickness and grade, and finished brackets are measured for hole spacing, bend angle, and flatness.
During production, forming dimensions are monitored at set intervals so drift is corrected before parts leave the line.
Post-production checks include visual inspection, coating thickness measurement, and a trial fit on the XCMG thermostat housing fixture.
Sample brackets from each batch undergo vibration and load tests to confirm structural integrity under real engine conditions.
Low-cost aftermarket brackets often use thinner steel, poor hole alignment, or weak paint that rusts and distorts.
A bracket with the wrong bend can push the thermostat housing off-centre, which pinches the gasket and causes a coolant leak.
The genuine 800169193 is manufactured to the XCMG drawing, so hole pattern, thickness, bend angle, and coating match the original part.
Using genuine XCMG parts also preserves warranty coverage, protects resale value, and maintains compatibility with other OEM components.
Backed by XCMG global quality standards and technical support, this thermostat bracket delivers dependable support in harsh conditions.
Choosing the genuine 800169193 bracket prevents small alignment problems from turning into expensive coolant leak repairs.
A bent bracket can tilt the thermostat housing, which damages the gasket and lets coolant escape under pressure.
Durable steel and proper coating keep the bracket rigid across a long service life, reducing replacement frequency.
Reliable support also extends gasket, hose, and thermostat life, lowering the total cost of ownership for fleet operators.
Fleet records from construction and mining operations show genuine XCMG cooling parts cut engine-related downtime.
XCMG applies sustainable manufacturing to the 800169193 bracket through recyclable steel content and efficient forming processes.
The long service life of the bracket reduces material consumption and lowers the environmental footprint of replacement parts.
Preventing coolant leaks protects soil and groundwater and supports compliance on environmentally sensitive sites.
Steel and coating materials in this component comply with RoHS and REACH rules for safe handling and responsible disposal.
The 800169193 Thermostat Bracket is held in XCMG regional distribution centres across North America, Europe, Asia, and Australia.
Each bracket is wrapped and packed in a sturdy carton that protects it from bending, moisture, and coating damage in transit.
For fleet-wide orders, XCMG provides volume pricing and consolidated freight options that simplify planning and reduce cost.
Real-time stock visibility and dedicated supply chain support help fill urgent requests quickly, shortening downtime on active projects.
Robust packaging preserves factory condition until installation, preventing the distortion and rust common in stored spares.
The XCMG Thermostat Bracket 800169193 is a vital support component for XCMG excavators, holding the thermostat housing securely in demanding conditions.
Its high-strength steel body, accurate hole pattern, and protective coating deliver dependable alignment in hot, wet, and dusty environments.
By keeping the housing flat and square, this bracket reduces downtime, lowers maintenance costs, and extends engine service life.
Always purchase genuine XCMG parts from authorised dealers to guarantee authenticity, quality, and performance for your equipment fleet.
Choose the 800169193 Thermostat Bracket for dependable support and lasting operational peace of mind.
Partner with XCMG, your trusted source for heavy equipment engine and hydraulic components that deliver real value.
OEM 800169193 – XCMG Thermostat Bracket – the definitive mounting bracket solution for your excavator thermostat housing and coolant circuit. Engineered for rigid alignment, designed for exact fitment, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
