OEM 800175125 The XCMG Water Pipe L=1100 800175125 is a genuine OEM coolant pipe engineered to carry engine coolant between the radiator, water pump, and engine block on XCMG excavators.
Identified by part number 800175125, this factory-formed pipe measures 1100 mm and routes coolant through the engine bay without kinks or restriction.
It is produced from corrosion-resistant steel or aluminum tube, mandrel-bent to the exact path and fitted with correct end connections for a clean seal.
Exact OEM length, bend radius, and port geometry allow direct replacement without cutting, welding, or adding adapters on site.
By keeping coolant flow steady and airtight, this water pipe protects the engine from overheating and keeps hydraulic output consistent all shift.
The 800175125 Water Pipe L=1100 is formed from corrosion-resistant tube that resists rust, scale build-up, and wall thinning in hot coolant service.
Mandrel bending keeps the bore round through every curve, so coolant flows without restriction, hot spots, or pressure loss.
Correctly formed end connections seal tightly against radiator and pump ports, preventing coolant loss and air pockets in the system.
The 1100 mm length follows the OEM route exactly, keeping the pipe clear of belts, fan blades, exhaust heat, and moving parts.
A protective outer coating shields the tube from mud, coolant splash, and vibration rubbing that can wear through unprotected metal.
Direct bolt-on dimensions mean the pipe fits the first time, cutting diagnostic time and keeping machine downtime to a minimum.
Production begins with certified tube inspected for wall thickness, outside diameter, and material grade before bending starts.
CNC mandrel benders follow the XCMG drawing path, producing repeatable radii without flattening, wrinkling, or ovality in the bore.
End fittings are brazed or rolled under controlled conditions, then checked for penetration, squareness, and clean sealing surfaces.
Inspectors compare finished pipes against routing fixtures to confirm overall length, bend angles, and port positions match the machine.
Batch records let XCMG trace every 800175125 pipe back to its tube lot and bending station, so quality questions are answered quickly.
The water pipe is the main artery of the cooling system, moving hot coolant from the engine to the radiator and cooler fluid back again.
A cracked or restricted pipe causes overheating, coolant loss, and cylinder head stress that can quickly turn into major engine damage.
The genuine 800175125 keeps coolant flow steady and sealed, so engine temperature stays in range during heavy digging and lifting.
Correct routing away from hot exhaust parts prevents coolant boiling and bubble formation, which protects the water pump from cavitation.
Stable engine temperature also keeps hydraulic oil cooler, which protects seals and maintains predictable machine response all shift.
The 800175125 Water Pipe L=1100 installs with standard hand tools, keeping labour time and downtime low during scheduled service.
Let the engine cool completely, release cooling system pressure, and drain coolant to the level recommended in the workshop manual.
Loosen the clamps and remove the old pipe, then clean both ports and inspect the mating surfaces for rust, scale, or cracks.
Fit new clamps or seals where required, position the new pipe along its original route, and tighten the connections to the manual torque.
Refill with the specified coolant mixture, run the engine to operating temperature, and check for leaks while the thermostat opens.
During routine maintenance, check the pipe for corrosion, rubbing marks, and loose clamps, and replace any suspect part promptly.
Every 800175125 pipe is produced in an ISO 9001 and ISO 14001 certified facility with traceability from raw tube to packed carton.
Incoming tube is checked for grade and wall thickness, and finished pipes are measured for bend accuracy and union alignment.
During production, inspectors monitor bend angles and port positions against routing fixtures to keep tolerances tight.
Post-production checks include visual inspection, dimensional verification, and pressure testing of each brazed or rolled joint.
Sample pipes from every batch undergo vibration and thermal cycling to confirm they hold up under real engine conditions.
Inexpensive aftermarket water pipes often use thin tube, rough bends, or weak joints that crack and leak within a short time.
The genuine 800175125 is manufactured to exacting XCMG standards, giving correct fit, reliable sealing, and long service life.
Its accurate forming and protective coating lower the risk of coolant loss, overheating, and unexpected engine shutdowns.
Genuine XCMG parts also preserve warranty coverage, protect resale value, and stay compatible with other OEM components.
Backed by XCMG global quality standards and technical support, this water pipe delivers dependable performance in tough conditions.
Selecting the genuine 800175125 pipe stops small coolant seeps from becoming major engine failures on the job site.
A leaking or restricted coolant line causes overheating, head gasket stress, and pump wear that quickly escalates repair costs.
Durable tube and a proper coating keep coolant flow steady over a long service life, reducing how often the part is replaced.
Reliable cooling also extends hose, seal, and oil life, lowering the total cost of ownership for fleet operators.
Fleet records from construction and mining operations show genuine XCMG cooling parts cut engine downtime noticeably.
XCMG applies sustainable manufacturing to the 800175125 pipe through recyclable metal content and efficient bending processes.
A long service life reduces material waste and lowers the environmental footprint of replacement parts over the machine lifecycle.
Preventing coolant leaks protects soil and groundwater and supports compliance on environmentally sensitive construction sites.
Metal and coating materials in this component meet RoHS and REACH rules for safe handling and responsible disposal.
The 800175125 Water Pipe L=1100 is held in XCMG regional distribution centres across North America, Europe, Asia, and Australia.
Each pipe is capped and wrapped in a protective sleeve inside a sturdy carton that guards against bending and impact in transit.
For fleet-wide orders, XCMG provides volume pricing and consolidated freight options that simplify planning and reduce cost.
Real-time stock visibility and dedicated supply chain support help fill urgent requests quickly, shortening downtime on active projects.
Robust packaging preserves factory condition until installation, preventing the deformation that ruins spare pipes in storage.
The XCMG 800175125 Water Pipe L=1100 is a vital cooling system component for XCMG excavators, delivering coolant securely in demanding conditions.
Its corrosion-resistant tube, mandrel-formed bends, and protective coating provide dependable performance in hot and dusty environments.
By stopping coolant leaks and flow restriction, this pipe reduces downtime, lowers maintenance spending, and extends engine service life.
Always buy genuine XCMG parts from authorised dealers to guarantee authenticity, quality, and performance for your equipment fleet.
Choose the 800175125 Water Pipe L=1100 for dependable cooling and lasting operational peace of mind.
Partner with XCMG, your trusted source for heavy equipment engine and hydraulic components that deliver real value.
OEM 800175125 – XCMG Water Pipe L=1100 – the definitive coolant water pipe solution for your excavator engine cooling circuit. Engineered for durability, designed for leak-free performance, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
