OEM 800175186 The XCMG Diesel Fuel Line 800175186 is a genuine OEM low-pressure fuel line engineered to feed clean diesel from the tank and filter to the engine on XCMG excavators.
Identified by part number 800175186, this factory-formed steel line carries fuel at a steady rate and keeps the feed circuit airtight under vibration.
It is produced from corrosion-resistant steel tube, mandrel-bent to the exact route, and fitted with correct unions for a clean bolt-on installation.
Exact OEM length, bend radius, and port geometry allow direct replacement without cutting, bending, or adding adapters in the field.
By keeping fuel flow stable and sealed, this diesel fuel line helps the engine start reliably and hold power through long working shifts.
The 800175186 Diesel Fuel Line uses seamless steel tube that resists rust, pitting, and wall thinning in wet and dusty engine bays.
Mandrel bending preserves a round bore through every curve, so diesel flows without turbulence, restriction, or measurable pressure loss.
Correctly formed unions seat tightly against filter and pump ports, preventing air ingress that causes hard starting and unstable idle.
The outer coating shields the tube from mud, coolant splash, and diesel residue, extending service life in severe working conditions.
Exact OEM routing keeps the line away from exhaust heat and moving parts, avoiding the chafing and baking that crack fuel lines.
Direct bolt-on dimensions mean the line fits the first time, cutting diagnostic time and keeping machine downtime to a minimum.
Production begins with certified steel tube inspected for wall thickness, outside diameter, and material grade before bending starts.
CNC mandrel benders follow the XCMG drawing path, producing repeatable radii without flattening, wrinkling, or ovality in the bore.
Union ends are brazed or flared under controlled heat, then checked for penetration, squareness, and clean sealing faces.
Inspectors compare finished lines against routing fixtures to confirm overall length, bend angles, and port positions match the machine.
Batch records let XCMG trace every 800175186 line back to its tube lot and bending station, so quality questions are answered quickly.
The diesel fuel line is the low-pressure lifeline of the engine, moving fuel from the tank and filter to the injection pump.
A cracked or loose line admits air, which causes long cranking, unstable idle, misfire, and a noticeable drop in digging power.
The genuine 800175186 keeps the feed circuit sealed and full of fuel, so the injection pump delivers the right volume at the right time.
Correct routing away from heat sources prevents fuel vaporisation and bubble formation, which can stall the engine under load.
A clean, tight line also reduces fuel consumption, lowers exhaust smoke, and protects injectors from contamination damage.
The 800175186 Diesel Fuel Line installs with standard hand tools, keeping labour time and downtime low during scheduled service.
Park the excavator on level ground, shut down the engine, and close the fuel shut-off valve before loosening any connection.
Clean the line ends and ports, then inspect the threads and copper washers for wear, hardening, or deformation.
Fit new sealing washers where required, guide the line along its original route, and tighten the unions to the manual torque.
Open the fuel valve, bleed the circuit if required, start the engine, and check each joint for weeping or bubbles.
In routine maintenance, look for rust, rubbing marks, and loose unions, and replace any suspect line before it fails on site.
Every 800175186 line is produced in an ISO 9001 and ISO 14001 certified facility with traceability from raw tube to packed carton.
Incoming tube is checked for grade and wall thickness, and finished lines are measured for bend accuracy and union alignment.
During production, inspectors monitor bend angles and port positions against routing fixtures to keep tolerances tight.
Post-production checks include visual inspection, dimensional verification, and pressure testing of each brazed or flared joint.
Sample lines from every batch undergo vibration and thermal cycling to confirm they hold up under real engine conditions.
Inexpensive aftermarket diesel lines often use thin tube, rough bends, or weak brazing that cracks and leaks within months.
The genuine 800175186 is manufactured to exacting XCMG standards, giving correct fit, reliable sealing, and long service life.
Its accurate forming and protective coating lower the risk of air ingress, fuel leaks, and unexpected engine shutdowns.
Genuine XCMG parts also preserve warranty coverage, protect resale value, and stay compatible with other OEM components.
Backed by XCMG global quality standards and technical support, this diesel line delivers dependable performance in tough conditions.
Selecting the genuine 800175186 line stops small fuel seeps from becoming major engine failures on the job site.
A leaking or air-drawing fuel line causes hard starting, power loss, and injection pump wear that quickly escalates repair costs.
Durable steel and a proper coating keep fuel flow steady over a long service life, reducing how often the part is replaced.
Reliable fuel delivery also extends filter, injector, and pump life, lowering the total cost of ownership for fleet operators.
Fleet records from construction and mining operations show genuine XCMG fuel system parts cut engine downtime noticeably.
XCMG applies sustainable manufacturing to the 800175186 line through recyclable steel content and efficient bending processes.
A long service life reduces material waste and lowers the environmental footprint of replacement parts over the machine lifecycle.
Preventing fuel leaks protects soil and groundwater and supports compliance on environmentally sensitive construction sites.
Steel and coating materials in this component meet RoHS and REACH rules for safe handling and responsible disposal.
The 800175186 Diesel Fuel Line is held in XCMG regional distribution centres across North America, Europe, Asia, and Australia.
Each line is capped and wrapped in a protective sleeve inside a sturdy carton that guards against bending and impact.
For fleet-wide orders, XCMG provides volume pricing and consolidated freight options that simplify planning and reduce cost.
Real-time stock visibility and dedicated supply chain support help fill urgent requests quickly, shortening downtime on active projects.
Robust packaging preserves factory condition until installation, preventing the deformation that ruins spare lines in storage.
The XCMG Diesel Fuel Line 800175186 is a vital fuel system component for XCMG excavators, delivering clean diesel securely in demanding conditions.
Its seamless steel tube, mandrel-formed bends, and protective coating provide dependable performance in hot and dusty environments.
By stopping fuel leaks and air ingress, this line reduces downtime, lowers maintenance spending, and extends engine service life.
Always buy genuine XCMG parts from authorised dealers to guarantee authenticity, quality, and performance for your equipment fleet.
Choose the 800175186 Diesel Fuel Line for dependable fuel delivery and lasting operational peace of mind.
Partner with XCMG, your trusted source for heavy equipment engine and hydraulic components that deliver real value.
OEM 800175186 – XCMG Diesel Fuel Line – the definitive fuel feed line solution for your excavator engine circuit. Engineered for durability, designed for leak-free performance, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
