OEM 319007311 The XCMG Washer (319007311) is a genuine OEM sealing and load-distribution component engineered for hydraulic joints and structural fasteners on XCMG excavators. Identified by part number 319007311, this precision-formed washer ensures even bolt loading and reliable sealing in the toughest construction, mining, and quarry environments.
Manufactured from high-strength steel with a zinc-nickel plated finish, the 319007311 Washer offers outstanding compression resistance, corrosion protection, and long service life. Its exact OEM inner diameter, outer diameter, and thickness guarantee a direct replacement without modification.
By distributing bolt load evenly, this washer prevents flange distortion, protects sealing faces from galling, and keeps hydraulic joints leak-free through long working shifts.
The 319007311 Washer is stamped from high-strength carbon steel that resists crushing under heavy bolt torque. This keeps the washer thickness uniform through repeated assembly cycles.
Both faces are ground flat to within 0.05 mm so bolt load spreads evenly around the flange. This prevents the high and low spots that cause sealing gaps.
The chamfered bore clears the bolt shank and prevents thread galling during installation. That detail also makes removal easier during routine service.
Zinc-nickel plating protects the steel from rust in coastal, mining, and high-humidity environments. The coating also keeps the washer from seizing against the flange.
By spreading bolt load evenly, the 319007311 washer prevents flange distortion and keeps hydraulic joints leak-free.
Production starts with certified steel strip that is checked for thickness and hardness before blanking. Each coil is traceable to its original mill heat number.
Blanks are punched and formed in precision dies. Inner and outer diameters are held to tight tolerances so the washer fits the bolt and flange correctly.
After forming, each washer is deburred and then zinc-nickel plated in a controlled bath. Plating thickness is measured to ensure uniform corrosion protection.
Final inspection includes dimensional checks, flatness measurement, and hardness testing. Sample washers undergo salt spray and load cycling before release.
The result is a washer that performs predictably for thousands of hours on your XCMG excavator, season after season.
Hydraulic flanges are clamped by bolts that must hold tight under pressure and vibration. Without a proper washer, bolt load concentrates on small spots.
The 319007311 Washer spreads that load evenly, preventing flange distortion and keeping the sealing face flat against its O-ring or gasket.
Field records from heavy excavation work show that machines fitted with genuine XCMG washers suffer fewer flange leaks and shorter diagnostic sessions.
The steel body and protective plating also resist moisture, dust, and chemical exposure, keeping performance stable across long service intervals in the field.
Inspect washers during service for crushing, corrosion, or cracks. Replace any compromised unit promptly with a genuine 319007311 component.
By keeping every flange joint tight, this washer supports safe, productive excavator operation every working day.
The 319007311 Washer installs easily by hand, which keeps downtime and labour costs low during scheduled servicing or emergency repairs.
Park the excavator on firm level ground, lower the attachment, and release all hydraulic pressure. Lock out the machine so the engine cannot be started while work is in progress.
Clean the flange faces and bolt threads thoroughly before assembly. Any grit or old sealant left behind can cause a slow leak after the joint is torqued.
Fit a new washer under each bolt head, then tighten the bolts in a diagonal pattern to the torque value listed in the service manual.
After assembly, run the machine at low idle and check every joint for weeping. Cycle the functions slowly, then inspect again once the oil has reached operating temperature.
During routine service, inspect washers for crushing or corrosion. Replace any degraded component promptly to preserve hydraulic performance and avoid breakdowns.
Choosing the genuine 319007311 Washer pays back over time by preventing hydraulic leaks, cutting diagnostic hours, and eliminating downtime caused by failed joints.
A single crushed or corroded washer can let a flange weep, draining oil over a shift and pushing debris through pumps, valves, and cylinders.
Across a typical 10,000-hour service life, hydraulic flanges endure millions of pressure cycles. The steel body of the 319007311 keeps load distribution consistent throughout.
Reliable flange sealing also extends the life of connected components such as pumps, valves, and cylinders, reducing replacement frequency and total maintenance spending.
Field data gathered from large mining and construction fleets shows genuine XCMG washers cut hydraulic-related downtime by as much as 12 percent.
The durable construction and quality plating keep the washer serviceable for years, removing the need for premature replacement and lowering lifecycle costs.
XCMG applies sustainable manufacturing principles to the 319007311 Washer through recyclable steel content and energy-efficient production processes.
The extended service life, often exceeding 8,000 hours in normal conditions, cuts material waste and lowers the environmental footprint associated with frequent replacements.
Preventing hydraulic leaks also avoids secondary damage and soil contamination, which supports regulatory compliance and responsible environmental stewardship on job sites.
Steel and plating materials are free from restricted substances and comply with RoHS and REACH rules, ensuring safe handling and disposal at end of life.
Selecting genuine XCMG hydraulic components supports responsible equipment management while delivering superior operational reliability and safety.
The precision-engineered design allows long, dependable service, which minimises resource consumption and waste generation across the machine’s working life.
The 319007311 Washer is held in XCMG regional distribution centres across North America, Europe, Asia, and Australia, supporting fast delivery for scheduled maintenance.
Every unit is packed with rust-preventive wrapping inside a fitted carton, shielding it from impact, moisture, and contamination throughout transit and storage.
For fleet-wide orders, XCMG offers volume pricing and consolidated freight options that reduce procurement costs and streamline inventory planning.
Real-time stock visibility and dedicated supply chain support help fulfil urgent requests quickly, shortening downtime and keeping excavators on the job.
Sturdy packaging preserves the washer’s factory condition until it is installed, preventing the surface damage that can occur in poorly stored spare parts.
With XCMG’s global aftermarket network behind it, you can depend on consistent quality and availability to keep your fleet working at full capacity.
Every 319007311 Washer comes from an ISO 9001 and ISO 14001 certified plant with complete material traceability from raw steel to packed product.
Incoming steel strip is tested for chemical composition, hardness, and dimensional accuracy before release to the stamping line.
During manufacturing, inner diameter, outer diameter, and thickness are monitored continuously, and every finished unit receives a full visual inspection.
Post-production checks include dimensional verification, flatness measurement, and plating thickness testing to confirm each washer meets the required specification.
Sample washers from each batch undergo salt spray exposure, load cycling, and hardness testing to prove long-term durability and stable performance.
Only washers that clear every quality gate are released, so you receive a dependable, high-performance hydraulic component every time.
Cheap aftermarket washers often use lower-grade steel, uneven thickness, or thin plating. Those shortcuts lead to crushing, corrosion, and persistent flange leaks.
The genuine 319007311 is built to XCMG’s exacting standards, delivering correct fit, reliable load distribution, and durable performance in the field.
Its high-strength steel body and precision stamping provide consistent results, lowering the chance of expensive hydraulic failures and unplanned machine downtime.
Using genuine XCMG parts also preserves warranty coverage, protects resale value, and maintains compatibility with other OEM systems on the machine.
Backed by XCMG’s global quality standards and technical support, this washer offers performance you can rely on.
Choose genuine XCMG for uncompromising hydraulic sealing performance in the most demanding working conditions.
The XCMG 319007311 Washer is a vital hydraulic sealing component for any XCMG excavator, keeping flange joints tight and the circuit leak-free in demanding conditions.
Its precision-engineered design, high-strength steel body, and robust manufacturing deliver dependable load distribution, enabling safe and productive operation in harsh environments.
By preventing hydraulic leaks and keeping contaminants out, this washer reduces downtime, lowers maintenance costs, and extends machine service life.
Always purchase genuine XCMG parts from authorised dealers to guarantee authenticity, quality, and performance for your equipment fleet.
Choose the 319007311 Washer for dependable hydraulic sealing and lasting operational peace of mind.
Partner with XCMG – your trusted source for heavy equipment hydraulic components that deliver real value.
OEM 319007311 – XCMG Washer – the definitive hydraulic sealing washer solution for your excavator’s flange joints. Engineered for durability, designed for reliable load distribution, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
