Anti-Slip Plate
Противоскользящая пластина
Placa antideslizante
The 319005005 Anti-Slip Plate is a durable, high-traction surface covering engineered for XCMG hydraulic excavators. As a non-engine auxiliary component, this plate provides superior grip on walkways, steps, and maintenance platforms, reducing the risk of slips and falls in wet, muddy, or oily conditions. Manufactured from heavy-duty steel with a raised diamond pattern and corrosion-resistant coating, the 319005005 anti-slip plate ensures operator safety, long-lasting performance, and easy cleaning in the most demanding construction and mining environments.
The 319005005 Anti-Slip Plate is a purpose-built safety component designed to provide secure footing on XCMG hydraulic excavators. As a non-engine auxiliary part, it is installed on access walkways, steps, and maintenance platforms to prevent accidents caused by mud, oil, or water. Its raised diamond pattern creates a high-friction surface that significantly reduces the risk of slips, even under heavy foot traffic or when carrying tools and materials. The plate is built to withstand the constant abrasion and impact typical of construction and mining sites, ensuring long-lasting safety and reliability.
Manufactured from robust carbon steel (Q235) with a thickness of 4.0 mm, the 319005005 plate offers excellent resistance to deformation and cracking. The diamond pattern is precisely formed through a stamping process, ensuring consistent height and grip across the entire surface. The plate is then treated with a zinc plating and a black epoxy powder coating, providing outstanding corrosion protection against moisture, hydraulic fluids, and UV exposure. This dual-layer finish not only extends the service life of the plate but also maintains its professional appearance.
The 319005005 Anti-Slip Plate features a robust 4.0 mm steel construction that provides a solid, stable walking surface, capable of supporting heavy loads without bending. Its raised diamond pattern offers a coefficient of friction exceeding 0.85 in wet conditions, ensuring excellent grip even when covered in mud or oil. This high level of traction significantly reduces the likelihood of operator falls, enhancing workplace safety and preventing costly injuries. The plate’s size, 600 mm x 400 mm, is optimized for standard excavator walkways, making it a direct replacement for original equipment.
The zinc plating and black epoxy coating provide superior resistance to rust, chipping, and UV degradation, ensuring the plate remains functional and visually appealing over years of outdoor use. The coating also makes the plate easy to clean, allowing quick removal of dirt and debris with a simple water jet or brush. The six pre-drilled 8.5 mm mounting holes allow for secure attachment using standard M8 bolts, simplifying installation and ensuring a firm fit that will not loosen under vibration.
By choosing the genuine 319005005 Anti-Slip Plate, operators can be confident that they are getting a product that meets XCMG’s stringent quality and safety standards. Its direct OEM fitment eliminates the need for modifications, ensuring a precise and secure installation. This plate is an essential upgrade or replacement part for maintaining maximum safety and compliance with workplace health and safety regulations.
The 319005005 Anti-Slip Plate is specifically designed for use on XCMG hydraulic excavators, including popular models such as the XE210, XE240, XE305, and other XE series machines. It is commonly installed on the upper deck walkways, entry steps, and service platforms, areas where operators and maintenance personnel frequently step. Its durable construction makes it ideal for heavy-duty applications in mining, quarrying, construction, and demolition, where equipment is exposed to extreme conditions and regular foot traffic.
Beyond excavators, this anti-slip plate can also be used on other XCMG equipment such as wheel loaders, crawler cranes, and dozers that have similar platform dimensions. Its universal design and mounting hole pattern allow for versatile installation on a variety of surfaces. However, it is always recommended to confirm compatibility with the specific machine model and location before ordering.
When replacing worn or damaged anti-slip plates, using the genuine 319005005 part ensures the correct pattern, thickness, and material quality. Aftermarket plates may have shallower patterns or inferior coatings that wear out quickly, reducing traction and increasing safety risks. Trust only genuine XCMG components to provide the highest level of protection for your team.
Installing the 319005005 Anti-Slip Plate is a straightforward task that can be accomplished with basic hand tools. Before installation, thoroughly clean the mounting surface to remove any dirt, grease, or loose paint. Position the plate over the designated area, aligning the pre-drilled holes with the corresponding threaded holes on the machine. Insert M8 bolts (or equivalent) through the holes and tighten them in a cross-pattern to the recommended torque (typically 15–20 N·m).
After installation, verify that the plate is securely fastened and does not move under foot pressure. Inspect the plate periodically for signs of wear, such as flattened diamond pattern or coating damage. Clean the plate regularly to maintain its slip-resistant properties, especially after operation in muddy or oily conditions. Use a mild detergent and water, and avoid using harsh chemicals or abrasive tools that could damage the coating.
If the plate becomes damaged or the coating is compromised, replace it immediately with a new genuine part to ensure continued safety. Keeping spare plates on hand for quick replacement can minimize downtime and maintain a safe working environment.
The 319005005 Anti-Slip Plate is manufactured in ISO 9001 certified facilities, adhering to strict quality control procedures. The carbon steel is sourced from approved suppliers and tested for chemical composition and mechanical properties. The stamping process is carefully monitored to ensure consistent pattern depth and uniformity across all plates.
The zinc plating and epoxy coating are applied in controlled environments to achieve the specified thickness and adhesion. Salt spray testing confirms that the plate withstands corrosion, while friction tests verify that the slip resistance meets the required coefficient of friction (≥ 0.85). Each plate is inspected for dimensional accuracy, hole alignment, and surface finish before packaging. These quality measures ensure that every plate meets XCMG’s safety and performance standards.
Using genuine XCMG 319005005 Anti-Slip Plates ensures that your equipment remains compliant with safety regulations and provides reliable protection for your operators. Counterfeit plates may use thinner steel or substandard coatings, leading to premature failure and increased risk of accidents. Always insist on genuine parts from authorized XCMG distributors.
The 319005005 Anti-Slip Plate is a critical safety component that enhances operator protection on XCMG hydraulic excavators. As a non-engine auxiliary part, it provides essential traction on walkways and platforms, reducing the risk of slips and falls in hazardous working conditions. Its durable construction, corrosion-resistant coating, and proven slip resistance make it a reliable choice for any excavator operator.
With its precise OEM fitment and high-quality materials, this anti-slip plate offers exceptional longevity and performance. Choosing the genuine 319005005 plate demonstrates a commitment to workplace safety and equipment reliability. Always source genuine XCMG parts from authorized distributors to guarantee authenticity and compliance with OEM specifications.
Whether for routine replacement or upgrading existing walkways, the 319005005 anti-slip plate is the preferred choice of professionals who prioritize safety, quality, and long-term value in their heavy equipment operations.
