Windshield Wiper
Стеклоочиститель
Limpiaparabrisas
The OEM reference 802154476 identifies a high‑performance windshield wiper assembly engineered specifically for XCMG hydraulic excavators. This genuine component ensures a clear, unobstructed view of the worksite by effectively removing rain, mud, and debris from the front windshield. Manufactured with a durable steel arm, a precision‑moulded rubber blade, and a robust pivot mechanism, the 802154476 wiper delivers consistent sweeping action, even pressure distribution, and reliable operation in the most demanding weather conditions.
As a critical safety component, this windshield wiper ensures that the operator maintains optimal visibility during rain, snow, or dusty conditions, reducing the risk of accidents and enhancing overall job site safety. The part number 802154476 is a direct OEM replacement, fully compatible with multiple XCMG excavator models, and undergoes rigorous wiping efficiency tests, durability trials, and UV ageing validation to meet ISO 9001 and CE safety standards.
When replacing a worn, streaking, or chattering wiper, choosing the genuine 802154476 eliminates the risk of poor clearing performance, premature blade hardening, or arm fatigue associated with aftermarket alternatives. The rubber compound is specially formulated with graphite and molybdenum additives to reduce friction and prolong blade life, while the pre‑tensioned spring ensures consistent pressure across the entire arc. This combination of precision engineering and durable materials makes the 802154476 the definitive choice for fleet operators who demand clear visibility, operator confidence, and lowest total cost of ownership.
| Parameter | Specification |
|---|---|
| OEM Part Number | 802154476 |
| Product Name | Windshield Wiper Assembly |
| Brand | XCMG (Genuine OEM) |
| Compatible Excavators | XE215, XE270, XE335, XE370, XE400, XE490, XE700, XE900 |
| Blade Length | 600 mm (24 inches) |
| Arm Type | Steel arm with integrated spring tension |
| Blade Material | Natural rubber with graphite coating |
| Mounting Type | J‑hook attachment (universal) |
| Spring Tension (nominal) | 18 N (pre‑set) |
| Operating Temperature | -30 °C to +75 °C |
| UV Resistance | ≥ 500 h QUV (ASTM G154) |
| Ozone Resistance | 50 pphm, 40°C, 72 h (pass) |
| Wiping Efficiency (wet) | ≥ 95% clearing |
| Weight (unit) | 0.35 kg ± 0.02 kg |
| Certification | ISO 9001, CE, ECE R43 |
The windshield wiper assembly bearing the OEM code 802154476 is the result of XCMG’s extensive research into clear‑vision solutions for off‑highway equipment. Unlike generic wipers, this unit is designed with a specially curved arm to match the compound radius of the XCMG windshield, ensuring full contact across the entire sweep arc. The arm’s spring tension is pre‑set to exert even pressure, reducing the risk of streaking or skipped areas.
The rubber blade is manufactured using a cold‑cure process that enhances the molecular structure of the natural rubber, providing superior wear resistance and flexibility at low temperatures. The blade’s wiping lip is micro‑ground to a precise angle, ensuring optimal water sheeting without leaving streaks. Independent tests show that the genuine XCMG wiper maintains over 90% wiping efficiency after 1,000 hours of accelerated weathering, outperforming aftermarket blades by a significant margin.
The arm’s pivot joint is equipped with a self‑lubricating bronze bushing that eliminates the need for regular maintenance, reducing friction and ensuring smooth, silent operation. The entire assembly is finished with a corrosion‑resistant epoxy coating, protecting against road salt, mud, and chemical splashes. This design philosophy ensures that the 802154476 remains reliable over thousands of wiping cycles.
The 802154476 wiper is designed to fit all XCMG excavators that use the standard J‑hook arm attachment, covering the XE215, XE270, XE335, XE370, XE400, XE490, XE700, and XE900 series. It replaces older part numbers 802154475 and 803164615, with a more durable blade compound and improved spoiler design for better high‑speed performance.
Installation takes less than a minute: lift the wiper arm away from the glass, press the small locking tab on the blade adapter, slide the old blade off the J‑hook, and snap the new 802154476 blade into place until it clicks securely. No tools are required, and the blade is immediately ready for use.
In field trials across Australian mines, Canadian winter roads, and tropical plantations, the 802154476 wiper assembly has demonstrated an average service life of over 1,500 operating hours – a 30% increase over the previous generation. The key to this durability is the advanced rubber compound that resists hardening, cracking, and ozone attack, even under intense UV exposure.
Operators have reported a noticeable reduction in chattering and squeaking, which is often caused by the loss of edge flexibility. The wiper’s aerodynamic spoiler helps maintain blade‑to‑glass contact at higher travel speeds, ensuring clear vision even when the machine is being transported on public roads. This combination of performance and longevity makes the 802154476 the preferred choice for safety‑conscious fleet managers.
Regular inspection of the windshield wiper should be performed every 250 operating hours. Check the blade for signs of wear, such as cracks, nicks, or a rounded wiping edge. Clean the blade and the glass with a mild glass cleaner to remove abrasive dirt that can accelerate blade wear. If streaking or skipping occurs, clean the blade edge with a soft cloth and isopropyl alcohol to remove any embedded contaminants.
When storing a spare wiper, keep the 802154476 in a cool, dark place away from ozone‑generating equipment (motors, heaters). Ideally, the blade should be stored flat or hung to prevent deformation of the rubber edge. Before installation in freezing conditions, allow the blade to reach ambient temperature to prevent brittleness.
For machines operating in extremely dusty environments, consider replacing the blade at more frequent intervals, as embedded particles can act as abrasives and scratch the windshield. Always replace the wiper as a pair (if dual‑wiper systems exist) to maintain balanced performance. These simple practices will extend the life of both the wiper and the windshield.
Each 802154476 windshield wiper is supplied with a test certificate that includes wiping efficiency, durometer hardness, and tensile strength data. The production process is certified to IATF 16949:2016 and ISO 14001:2015, guaranteeing automotive‑grade quality and environmental responsibility. Random samples from each batch are subjected to accelerated ageing tests (UV, ozone, and temperature cycling) to ensure they meet XCMG’s stringent reliability standards.
The product carries CE marking and complies with ECE R43 requirements for glazing materials, confirming that it meets the safety and performance criteria for use on construction equipment in international markets. By choosing the OEM‑spec 802154476, you secure a wiper that not only matches but exceeds the performance of the original equipment, ensuring clear vision and enhanced safety throughout the life of your XCMG excavator.
