Combination Switch
Комбинированный переключатель
Interruptor combinado
The 802155710 Combination Switch is a multi-function electronic control device engineered to consolidate essential operator commands into a single, ergonomic interface for XCMG articulated dump trucks. This advanced switch integrates multiple control functions – including lighting, wiper, horn, turn signals, and auxiliary systems – into one compact unit, reducing cab clutter and enhancing operator efficiency. Featuring high-reliability sealed contacts and a rugged weatherproof housing, the 802155710 combination switch delivers precise, consistent switching performance in the most demanding mining, quarrying, and heavy construction environments, ensuring reliable machine control and improved safety throughout the vehicle’s operating life.
The 802155710 Combination Switch is a multi-function electronic control device engineered to consolidate essential operator commands into a single, ergonomic interface for XCMG articulated dump trucks.
This advanced switch integrates multiple control functions – including lighting, wiper, horn, turn signals, and auxiliary systems – into one compact unit, reducing cab clutter and enhancing operator efficiency.
In the demanding environments typical of mining, quarrying, and heavy construction, operators need reliable, intuitive controls that allow them to focus on safe machine operation without distraction.
The 802155710 combination switch is engineered with a logical layout and positive tactile feedback, enabling quick, accurate actuation even when wearing heavy gloves.
Featuring high-reliability sealed contacts and a rugged weatherproof housing, this switch delivers precise, consistent switching performance and long-term durability.
This component is a direct OEM replacement, restoring the original control functionality and ensuring that all electrical systems respond as intended throughout the vehicle’s operating life.
The 802155710 Combination Switch is a fundamental element in ensuring safe and efficient machine operation on XCMG articulated dump trucks.
Properly functioning lighting and signaling controls are essential for visibility, communication with other equipment, and compliance with site safety regulations.
A faulty switch can lead to loss of headlights, turn signals, or hazard lights, increasing the risk of collisions or accidents in low-visibility conditions.
By ensuring that the 802155710 combination switch is in optimal condition, operators can maintain full control over all critical vehicle functions, enhancing safety and productivity.
The 802155710 Combination Switch features a carefully engineered design that combines multiple control functions, robust construction, and operator comfort.
The switch housing is molded from glass-filled nylon (PA66 GF30), providing excellent mechanical strength, dimensional stability, and resistance to vibration and impact.
All moving contacts are made from silver alloy, which offers high conductivity, low contact resistance, and self-cleaning properties to maintain reliable switching even after extended use.
The switch is designed with a double-break contact mechanism that ensures positive opening and closing, reducing arcing and extending contact life.
Integral sealing prevents moisture and dust ingress, with an IP66 rating that protects against powerful water jets and heavy dust exposure – ideal for mining and construction environments.
A 12-pin sealed connector provides a secure, weatherproof electrical interface that simplifies installation and reduces the risk of wiring faults.
The 802155710 Combination Switch is produced using advanced injection molding, precision stamping, and automated assembly processes, ensuring consistent quality and performance.
The raw materials, including the PA66 GF30 resin and silver alloy contacts, are sourced from approved suppliers and undergo rigorous incoming inspection.
Injection molding parameters are tightly controlled to ensure consistent part geometry and dimensional accuracy, while contact stamping and forming are performed on high-precision presses.
Each switch is 100% tested for electrical continuity, contact resistance, and mechanical feel. A sample from each production batch is subjected to thermal shock, vibration, and life-cycle testing.
The 802155710 Combination Switch is designed with the operator in mind, featuring a logical layout that places frequently used controls within easy reach.
The switch levers and buttons provide positive tactile feedback, allowing operators to confirm actuation without taking their eyes off the work area.
An integrated flash-to-pass function allows drivers to quickly signal other vehicles, enhancing safety in close-quarters operations.
The switch’s wide operating temperature range (-40°C to +85°C) ensures reliable performance in extreme cold and hot climates, while the UV-stabilized housing prevents degradation from prolonged sunlight exposure.
The switch is fully RoHS compliant, meeting environmental standards for hazardous substance reduction.
The 802155710 Combination Switch is manufactured using premium materials and advanced production techniques, ensuring exceptional quality and reliability.
The housing is molded from PA66 GF30, a glass-reinforced nylon that provides excellent mechanical strength, heat resistance, and dimensional stability over a wide temperature range.
The silver alloy contacts offer high conductivity and resistance to oxidation, ensuring low contact resistance and reliable switching even under high current loads.
Each switch is produced in ISO 9001 and ISO 14001 certified facilities, with strict process controls at every stage – from raw material verification to final assembly and testing.
The switch meets ECE R10 EMC standards, ensuring electromagnetic compatibility with the vehicle’s electronic systems and reducing interference.
The result is a combination switch that delivers consistent, reliable performance, with a service life that matches or exceeds that of the original equipment.
The 802155710 Combination Switch plays a vital role in preventing electrical system failures and ensuring the operational safety of XCMG articulated dump trucks.
A faulty switch can cause intermittent or complete loss of lighting, signaling, or wiper functions, compromising visibility and communication – a serious safety hazard.
Moisture ingress or contact contamination can lead to high resistance, overheating, or complete failure of the switch.
Regular inspection of the switch is essential to identify early signs of wear, corrosion, or damage. Any suspect switches should be replaced immediately.
Using a genuine XCMG 802155710 combination switch ensures that the component meets the original design specifications, providing the intended level of reliability and performance.
It is recommended to check the connector and wiring harness for signs of wear or corrosion during routine maintenance.
The 802155710 Combination Switch is specifically designed for use in XCMG articulated dump trucks, including the XDA30, XDA40, XDA45, XDA45U, XDA60, and TA30 series models.
These vehicles are deployed in a wide range of demanding applications, including open-pit mining, quarrying, heavy construction, water conservancy, harbour operations, and large-scale earthmoving projects.
The combination switch is mounted on the steering column and provides control of lighting, turn signals, horn, wipers, and auxiliary functions, making it a central interface for operator commands.
Beyond articulated dump trucks, this switch can also be used in other XCMG equipment that employs similar control layouts, such as wheel loaders, crawler dozers, and motor graders.
The switch’s standard connector and mounting configuration make it a versatile replacement part for a wide range of heavy machinery, providing flexibility for maintenance and repair operations.
When replacing a faulty combination switch, using the genuine 802155710 part ensures correct fitment, electrical compatibility, and functional integration with the vehicle’s electronic systems.
It is always recommended to verify the wiring harness connector and pin configuration before installation.
Installing the 802155710 Combination Switch requires care to ensure proper alignment, secure mounting, and reliable electrical connections.
Before installation, disconnect the vehicle battery to prevent accidental short circuits. Remove the old switch by carefully disconnecting the wiring harness and unscrewing the mounting hardware.
Inspect the new switch for any signs of damage, such as cracked housing, bent pins, or damaged levers. If any damage is found, do not install the switch and contact your supplier.
Position the new switch on the steering column, ensuring that it is correctly aligned with the mounting holes and that the wiring harness connector reaches without strain.
Secure the switch using the specified screws or bolts, tightening them to the manufacturer’s recommended torque (typically 2–3 N·m). Connect the wiring harness connector, ensuring it clicks into place and is fully seated.
After installation, reconnect the battery and test all functions of the switch – lights, turn signals, wipers, horn, and auxiliary – to verify correct operation.
During routine maintenance, inspect the switch for signs of wear, corrosion, or damage. Check the connector for tightness and cleanliness.
If any performance issues or damage are detected, replace the switch immediately. Keeping a spare 802155710 combination switch on hand can help minimize downtime during unexpected repairs.
The 802155710 Combination Switch is manufactured in ISO 9001 and ISO 14001 certified facilities, adhering to the highest quality and environmental management standards.
The raw materials, including the PA66 GF30 resin and silver alloy contacts, are sourced from approved suppliers and undergo rigorous incoming inspection.
The injection molding, stamping, and assembly processes are precisely controlled, with regular tooling maintenance and quality checks to ensure consistent part geometry and performance.
Each switch is 100% tested for electrical continuity, contact resistance, and mechanical feel. A sample from each production batch is subjected to thermal shock, vibration, life-cycle, and EMC testing.
The switch meets ECE R10 EMC standards and is RoHS compliant, ensuring compliance with international environmental and safety regulations.
These rigorous quality assurance measures guarantee that every 802155710 combination switch delivers the reliability, durability, and performance expected from a genuine XCMG component.
Using genuine XCMG 802155710 combination switches guarantees proper fit, optimal electrical performance, and compatibility with the vehicle’s control systems.
The 802155710 Combination Switch is an essential component for ensuring the electrical control integrity and operational safety of XCMG articulated dump trucks.
As a critical multi-function control device, this switch provides reliable, intuitive operation of lighting, signaling, wipers, and auxiliary functions, enabling operators to maintain full command of the vehicle in demanding conditions.
Its rugged construction, high-quality materials, and precision engineering ensure exceptional durability and long-term performance in the most demanding mining, quarrying, and construction environments.
With its precise OEM fitment and uncompromising quality, this combination switch offers outstanding value and peace of mind for fleet operators, maintenance professionals, and equipment owners alike.
Choosing the genuine XCMG 802155710 combination switch protects your electrical systems from failure, reduces maintenance costs, and ensures that your articulated dump truck remains productive, reliable, and safe.
Always source genuine XCMG parts from authorised distributors to guarantee authenticity, compliance with OEM specifications, and long-term performance.
Whether for planned maintenance or emergency repairs, the 802155710 combination switch is the trusted choice of professionals who demand the highest standards of quality and reliability in their heavy equipment.
