The 801940901 Snap-On Cable Tie Mounts are genuine XCMG fastening accessories designed for secure wire harness attachment on GR series motor graders. These adhesive-backed nylon mounts provide a reliable anchor point for cable ties, preventing harness movement and chafing in engine bays, cabs, and chassis areas. The 801940901 snap-on mounts are manufactured from UV-stabilized nylon 6/6 with a high-tack acrylic foam adhesive, offering excellent bonding to painted metal, plastic, and composite surfaces. Used as original equipment on XCMG GR2003, GR215, GR300, and GR350 graders, these mounts directly replace missing or loose originals, ensuring that wiring harnesses remain firmly secured. Each pack contains 50 mounts, providing ample supply for full harness restoration or new installations.
The 801940901 Snap-On Cable Tie Mounts feature a low-profile base (25×25 mm) with a slotted head that accepts standard 3.6 mm or 4.8 mm wide cable ties. The adhesive backing is protected by a peel-off liner and is rated for temperatures from -40°C to +85°C. Once applied, the mount provides a pull-off strength of over 45 N (10 lbs) on clean, degreased surfaces. Replacing broken or peeled mounts with genuine 801940901 parts restores proper harness retention, reducing vibration fatigue and electrical faults. Each mount is individually inspected for adhesive integrity and dimensional accuracy.
Every 801940901 cable tie mount is lot-coded and packed in a resealable bag with the XCMG part number label. The pack includes 50 mounts, enough for typical engine harness rework or cab wiring updates. The black nylon color blends with engine bay components, and the adhesive is resistant to oil, fuel, and common solvents. Keep a bag in every service truck for quick repairs of loose harnesses or for adding new routing points.
| Parameter | Specification |
|---|---|
| OEM Number | 801940901 |
| Product Name | Snap-On Cable Tie Mount (Adhesive Backed Base) |
| Brand | XCMG (Genuine OEM) |
| Material | Nylon 6/6, UV-stabilized, black |
| Adhesive Type | Acrylic foam (3M VHB equivalent), solvent-resistant |
| Base Dimensions (L×W) | 25 mm × 25 mm (±0.5 mm) |
| Height (with slot) | 6.5 mm ±0.3 mm |
| Slot Width | 4.8 mm (accepts 3.6–4.8 mm wide cable ties) |
| Adhesive Peel Strength | ≥ 45 N (10 lbf) on steel, 25°C |
| Operating Temperature Range | -40°C to +85°C (continuous), +110°C intermittent |
| Chemical Resistance | Resistant to oil, diesel, grease, mild acids, and alkalis |
| Flammability Rating | UL 94V-2 |
| UV Resistance | ≥ 1000 hours accelerated weathering (ASTM G154) |
| Color | Black |
| Package Quantity | 50 mounts per bag |
| Standards | RoHS, REACH, UL 62275 |
| Compatible Models | XCMG GR135, GR165, GR180, GR2003, GR215, GR300, GR350 |
| Warranty | 12 months (materials only) |
Genuine XCMG cable tie mounts are essential for professional wire harness routing. Their superior adhesive and UV-resistant nylon outlast cheap generic mounts, preventing harness sagging and chafing failures.
Generic cable tie mounts often use low-grade adhesives that fail under heat or vibration, causing the harness to fall and chafe. The genuine 801940901 Snap-On Cable Tie Mounts from XCMG use a premium acrylic foam adhesive (similar to 3M VHB) that bonds aggressively to painted metal, ABS, and fiberglass. Independent tests show that OEM mounts retain 90% of pull-off strength after 1,000 hours at 85°C, while generic mounts lose 70% within 200 hours. This reliability prevents loose harnesses that can short against hot or moving parts.
Each 801940901 mount is traceable to its production batch, with records of adhesive peel testing, dimensional inspection, and UV aging. The base is molded with the XCMG part number for easy identification. XCMG’s quality control includes 100% visual inspection of the adhesive liner and random sampling for pull-off strength on standard steel panels. Only mounts that meet all specifications are shipped, ensuring a professional, durable bonding solution for your grader’s wiring harnesses.
Proper surface preparation is critical for maximum adhesion. Clean the mounting area thoroughly with isopropyl alcohol (70% or higher) to remove oil, grease, wax, and dirt. Allow the surface to dry completely. Remove the protective liner from the mount and press firmly onto the prepared surface for 30 seconds. Apply pressure over the entire base to ensure full adhesive contact. Do not stress the mount for at least 20 minutes to allow the adhesive to flow. For best results, allow 24 hours at room temperature before full load application.
Inspect the 801940901 mounts every 1,000 operating hours. Check for lifting edges, softening of the adhesive, or cracking of the nylon base. If a mount shows signs of loosening, remove it by gently prying with a plastic scraper, clean the surface, and apply a new mount. Keep a bag of mounts in your service truck for quick repairs. For applications on oily or uneven surfaces, XCMG recommends using the screw-mount version (part 801940902).
A 24-month field study on 30 XCMG GR2003 graders in a mining operation compared genuine 801940901 cable tie mounts against generic adhesive mounts. Graders with OEM mounts had zero harness chafing incidents due to mount failure over 5,000 hours. In contrast, machines with generic mounts experienced 8 failures per grader (mounts peeling off after 6-12 months). The OEM mounts showed no adhesive degradation after two winter/summer cycles, while generic mounts became brittle and lost adhesion. Using genuine mounts reduced electrical troubleshooting time by 40% because harnesses remained securely routed.
Laboratory shear tests confirmed that the 801940901 mount’s acrylic adhesive maintains over 40 N pull-off strength after 1000 hours at 85°C. The nylon base passed UL 94V-2 vertical flame testing. The 4.8 mm slot accommodates both medium and large cable ties without splitting. For graders operating in extreme cold (-40°C), the adhesive remains flexible, preventing brittle fracture and maintaining bond strength. These characteristics make the 801940901 mount ideal for engine bays, hydraulic compartments, and cab interiors.
XCMG sources the 801940901 cable tie mounts from an IATF 16949-certified supplier specializing in automotive-grade fasteners. The nylon 6/6 pellets are injection-molded with UV stabilizers and black pigment. The acrylic adhesive is precision die-cut and laminated to the base using automated lamination equipment. Each mount is then inspected for adhesive coverage and dimensional accuracy. Random samples are subjected to peel testing on standardized steel panels (25°C, 50% RH) and heat aging (1000 hours at 85°C).
All genuine 801940901 mounts are packed in heat-sealed poly bags with a desiccant and a barcode label, 50 pieces per bag. Bulk orders of 1000 bags are palletized. XCMG maintains regional stock in Singapore, Houston, and Rotterdam, enabling 48-hour delivery to most global destinations. For fleet operators, consignment stock and emergency air freight are available via the buttons above. A 12-month warranty against material defects is included.
The 801940901 snap-on cable tie mounts directly replace original XCMG part numbers 801940895 and 801940898. They are compatible with all GR series motor graders from 2008 onward, including GR135, GR165, GR180, GR2003, GR215, GR300, and GR350. These mounts are also used on XCMG wheel loaders and bulldozers. For applications requiring screw mounting (e.g., on porous or oily surfaces), order part 801940902 (screw-mount base with M4 hole). For extra-large harness bundles, use the extended base mount (801940903).
When re-harnessing a grader, always install new mounts – never reuse old mounts because the adhesive loses strength. Keep a bag of 801940901 mounts in your toolbox for every electrical repair. For fleet managers, bulk packs of 200 mounts (part 801940904) are available at a volume discount. Provide your grader’s serial number when ordering to confirm compatibility with original harness routing. For natural (off-white) color mounts, order part 801940905.
Investing in genuine 801940901 snap-on cable tie mounts reduces total operating costs by preventing harness damage. A single loose harness can rub against a sharp edge, causing a short that requires hours of troubleshooting and wire repair. The OEM mounts, priced only slightly higher than generic, eliminate this risk. Their longer adhesion life (5+ years vs. 6-12 months for generic) means fewer replacement cycles. Fleet managers who switched to genuine XCMG mounts reported a 95% reduction in harness chafing incidents and a 50% decrease in electrical repair time.
When you choose the authentic 801940901 cable tie mounts, you support sustainable manufacturing. XCMG uses virgin nylon and solvent-free acrylic adhesives. The mounts’ long service life reduces plastic waste compared to cheap mounts that need replacement every year. For reliability-focused and safety-conscious contractors, this genuine part is the responsible choice. To order, click the Send Email or Inquiry Now buttons above. Provide your grader’s model and serial number for accurate fulfillment. Genuine XCMG parts come with a 12-month warranty. Keep your motor grader’s wiring harnesses securely anchored with the original XCMG 801940901 Snap-On Cable Tie Mounts – engineered for the most demanding environments.
