Bearing 6005-2z
Подшипник 6005-2z
Rodamiento 6005-2z
The 800500167 Bearing 6005-2z is a precision‑engineered deep‑groove ball bearing designed to provide smooth, low‑friction rotational support in critical driveline, transmission, and auxiliary systems of XCMG articulated dump trucks. As a non‑engine mechanical component, this bearing ensures accurate shaft alignment, reduces wear, and extends the service life of rotating assemblies. Manufactured from high‑grade chromium steel with precision‑ground raceways, a robust cage, and metal shields (2Z) on both sides, the 800500167 bearing delivers exceptional load capacity, fatigue resistance, and long‑term reliability, making it an indispensable component for maintaining power transmission efficiency and machine uptime in the most demanding mining, quarrying, and heavy construction operations.
The 800500167 Bearing 6005-2z is a precision‑engineered deep‑groove ball bearing designed to provide smooth, low‑friction rotational support in critical driveline, transmission, and auxiliary systems of XCMG articulated dump trucks.
As a non‑engine mechanical component, this bearing ensures accurate shaft alignment, reduces wear, and extends the service life of rotating assemblies.
In heavy‑duty mining and construction applications, bearings are subjected to high radial loads, shock impacts, and contamination. The 800500167 bearing is engineered to withstand these harsh conditions while maintaining low friction and minimal heat generation.
Manufactured from high‑grade chromium steel with precision‑ground raceways, a robust cage, and metal shields (2Z) on both sides, this bearing delivers exceptional load capacity, fatigue resistance, and long‑term reliability.
The 2Z shields provide effective protection against dust and debris while allowing for grease retention, making it ideal for applications where lubrication intervals are extended.
This component is a direct OEM replacement, restoring original rotational performance after wear or damage, ensuring that the vehicle maintains its driveline efficiency and machine uptime.
The 800500167 Bearing 6005-2z is fundamental to the efficient and reliable operation of rotating shafts in transmissions, water pumps, alternators, and fan hubs.
By providing a low‑friction interface between the shaft and the housing, the bearing minimises power loss due to friction, thereby improving fuel efficiency and reducing operating costs.
The deep‑groove design allows the bearing to accommodate both radial and moderate axial loads, making it versatile for a wide range of mounting configurations.
A properly functioning bearing prevents shaft deflection, reduces vibration, and ensures that gear meshing remains consistent, which extends the life of gears and seals.
Regular inspection of bearings for noise, play, or overheating is recommended. Any signs of wear or damage should be addressed immediately to prevent catastrophic driveline failure.
The 800500167 Bearing 6005-2z features a meticulously engineered geometry that optimises load distribution, friction reduction, and sealing effectiveness.
The raceways are precision‑ground to achieve a surface roughness of Ra ≤ 0.2 µm, ensuring smooth, consistent rolling contact and reducing wear.
The rolling elements (balls) are manufactured to Grade 5 precision, with a sphericity tolerance of ≤ 0.05 µm, guaranteeing uniform load distribution and minimal vibration.
The cages are made from high‑strength steel or polyamide, designed to retain the balls securely while allowing for smooth rotation and high‑speed operation.
The metal shields (2Z) are non‑contact, which prevents excessive friction while effectively blocking large particles and retaining grease. This design extends the bearing’s service life and reduces maintenance needs.
The bearing is pre‑lubricated with a high‑performance lithium‑based grease that provides excellent corrosion resistance and thermal stability across a wide temperature range.
The overall tolerance class meets P0 (ABEC‑1), ensuring compatibility with standard shaft and housing fits used in XCMG equipment.
The 800500167 Bearing 6005-2z is manufactured from high‑grade GCr15 chrome steel, a material specifically selected for its excellent hardenability, wear resistance, and fatigue strength.
The rings and rolling elements undergo a controlled heat treatment process that includes carburising, quenching, and tempering to achieve a uniform hardness of 60–65 HRC.
This hardness level provides the necessary resistance to plastic deformation under heavy loads while maintaining sufficient toughness to withstand impact shocks.
The stabilisation treatment ensures that the bearing retains its dimensional accuracy even after exposure to high temperatures during operation.
The combination of high‑quality material and precise heat treatment results in a bearing that delivers consistent performance over an extended service life, reducing the frequency of replacements.
The 800500167 Bearing 6005-2z is produced in ISO 9001 and ISO 14001 certified facilities, adhering to the highest quality and environmental standards.
The raw steel is sourced from approved mills and undergoes rigorous incoming inspection, including chemical composition analysis, non‑metallic inclusion rating, and grain size evaluation.
The grinding process is performed on state‑of‑the‑art CNC machines with in‑process gauging, ensuring that all critical dimensions are maintained within tight tolerances.
Each bearing is 100% inspected for bore diameter, outer diameter, width, radial runout, and axial runout using precision measuring instruments.
Noise and vibration levels are tested using specialized equipment to ensure that the bearing operates smoothly and quietly, meeting the stringent requirements of XCMG.
The grease fill quantity is precisely controlled, and the shields are properly seated to prevent leakage or ingress of contaminants.
These rigorous quality assurance measures guarantee that every 800500167 bearing delivers the reliability, performance, and durability expected from a genuine XCMG component.
The 800500167 Bearing 6005-2z is a critical component for ensuring the long‑term reliability and safety of XCMG articulated dump trucks.
A worn or failed bearing can cause shaft misalignment, excessive vibration, and overheating, leading to premature failure of gears, seals, and other adjacent components.
In driveline applications, a seized bearing can result in catastrophic damage to the transmission or differential, causing costly downtime and repairs.
The 800500167 bearing prevents these issues by providing a durable, low‑friction interface that maintains shaft alignment and absorbs radial and axial loads effectively.
Regular inspection of bearings is recommended during routine maintenance. Signs of noise, play, or rough rotation indicate that the bearing should be replaced.
Using a genuine XCMG 800500167 bearing ensures that the replacement component meets the original design specifications, providing the intended level of performance and durability.
The 800500167 Bearing 6005-2z is specifically designed for use in XCMG articulated dump trucks, including the XDA30, XDA40, XDA45, XDA45U, XDA60, and TA30 series models.
These vehicles are deployed in a wide range of demanding applications, including open‑pit mining, quarrying, heavy construction, water conservancy, harbour operations, and large‑scale earthmoving projects.
The bearing is used in various rotating assemblies, including transmission shaft supports, water pump bearings, alternator and fan hub mounts, and belt tensioner pulleys.
Beyond articulated dump trucks, this bearing can also be used in other XCMG equipment that employs the same bearing size and specification, such as wheel loaders, excavators, and motor graders.
The bearing’s standard dimensions (25x47x12 mm) make it a versatile replacement part for a wide range of heavy machinery, providing flexibility for maintenance and repair operations.
When replacing a worn or damaged bearing, using the genuine 800500167 part ensures correct fit, material quality, and performance, safeguarding the equipment from premature failure.
It is always recommended to inspect the shaft and housing when installing a new bearing, and to replace any worn components to ensure a reliable assembly.
Installing the 800500167 Bearing 6005-2z correctly is essential to achieve its intended performance and service life.
Before installation, clean the bearing and the housing to remove any dirt, debris, or old grease. Inspect the bearing for any signs of damage, corrosion, or contamination.
Apply a thin, even layer of clean grease to the bearing bore and the shaft to facilitate assembly and prevent fretting corrosion.
Use a suitable press or installation tool to seat the bearing onto the shaft or into the housing, applying force only to the ring that is being press‑fitted. Avoid hammering directly on the bearing.
Ensure that the bearing is seated squarely and fully against the shoulder, and that the shields are not deformed during installation.
After installation, rotate the shaft to verify that the bearing spins freely without binding or excessive noise.
During routine maintenance, inspect the bearing for signs of wear, overheating, or lubricant leakage. Replace the bearing immediately if any abnormalities are found.
Keeping a spare 800500167 bearing on hand can help minimize downtime during unexpected repairs, ensuring that the vehicle can be returned to service quickly.
The 800500167 Bearing 6005-2z is manufactured in accordance with the highest quality standards, with every production batch subjected to comprehensive testing and inspection.
The facility is certified to ISO 9001 and ISO 14001, and the manufacturing process follows XCMG’s stringent OEM specifications, ensuring that each bearing meets the required performance criteria.
Dimensional accuracy is verified using precision measurement equipment, with bore, outer diameter, width, and runout checked against the engineering drawings.
Hardness testing is performed on every batch using Rockwell testers, ensuring the bearing meets the 60–65 HRC specification.
Noise and vibration tests are conducted using acoustic emission testing to ensure smooth operation and compliance with ISO 15242 standards.
Grease fill quantity and cleanliness are verified, and the shields are tested for proper fit and sealing effectiveness.
These rigorous quality assurance measures guarantee that every 800500167 bearing delivers the reliability, performance, and durability expected from a genuine XCMG component.
Using genuine XCMG 800500167 bearings ensures proper fit, optimal rotation, and compatibility with the vehicle’s systems.
The 800500167 Bearing 6005-2z is an essential component for ensuring the rotational efficiency, reliability, and longevity of driveline and auxiliary systems on XCMG articulated dump trucks.
As a non‑engine mechanical part, this bearing provides a low‑friction, durable interface that reduces wear, maintains alignment, and extends the service life of rotating assemblies.
Its high‑grade chromium steel construction, precision grinding, and effective shielding ensure exceptional performance in the most demanding mining, quarrying, and construction environments.
With its precise OEM fitment and uncompromising quality, this bearing offers outstanding value and peace of mind for fleet operators, maintenance professionals, and equipment owners alike.
Choosing the genuine XCMG 800500167 bearing protects your equipment from rotational failures, reduces maintenance costs, and ensures that your articulated dump truck remains productive, reliable, and safe.
Always source genuine XCMG parts from authorised distributors to guarantee authenticity, compliance with OEM specifications, and long‑term performance.
Whether for planned maintenance or emergency repairs, the 800500167 bearing is the trusted choice of professionals who demand the highest standards of quality and reliability in their heavy equipment.
