OEM 800374311 The XCMG Friction Plate (800374311) is a genuine OEM high‑performance friction element designed for reliable torque transmission and precise engagement in automatic transmissions, wet brake systems, and clutch packs of XCMG articulated dump trucks. This precision‑engineered friction plate, identified by part number 800374311, is manufactured to deliver consistent friction performance, excellent heat dissipation, and outstanding durability under the extreme loads and continuous operating cycles typical of heavy mining and construction environments.
Constructed from premium friction materials – either sintered bronze or advanced paper‑based compounds – bonded to a precision‑stamped steel core, the 800374311 friction plate offers a stable coefficient of friction across a wide temperature range, superior resistance to glazing, and exceptional wear life. Its optimised oil groove pattern promotes efficient fluid flow and cooling, reducing thermal stress and prolonging the service life of both the friction plate and the mating steel plates.
The 800374311 friction plate is fully compatible with XCMG ADT series, providing a direct replacement solution that restores original shift quality, braking smoothness, and overall driveline reliability – ensuring your fleet operates at maximum productivity with minimal downtime.
The 800374311 Friction Plate is a precision‑manufactured component that provides the essential friction interface for clutch engagement and brake application in XCMG ADT transmissions and wet brake systems.
In heavy‑duty applications, the friction plate must deliver consistent torque capacity while withstanding high temperatures, pressure, and sliding velocities without glazing or excessive wear.
This genuine XCMG plate is produced from high‑quality friction materials – either sintered bronze for extreme service or advanced paper‑based for smoother engagement – securely bonded to a precision‑stamped steel core.
Its carefully designed oil groove pattern ensures efficient cooling and removes debris, preventing heat‑related damage and maintaining stable friction characteristics over the plate’s service life.
The plate’s consistent friction coefficient across a broad temperature spectrum guarantees predictable shift feel and braking performance, even under sustained heavy loads.
Mining field data confirms that genuine XCMG friction plates reduce clutch and brake wear by over 40% compared to generic aftermarket options, significantly extending overhaul intervals.
The 800374311 Friction Plate is fundamental to smooth gear changes and reliable braking performance, directly influencing operator control, productivity, and safety.
Worn or glazed plates cause harsh engagement, shuddering, and prolonged shift times, increasing stress on driveline components and reducing operational efficiency.
This genuine XCMG plate restores original friction characteristics, ensuring seamless clutch engagement, consistent brake apply, and precise gear selection, enhancing operator confidence and machine control.
Proper friction plate condition also minimises heat generation in the transmission and brakes, protecting seals, bearings, and hydraulic components from thermal degradation.
Fleet operators have reported a 30% improvement in shift quality and a 25% reduction in brake system repairs after fitting genuine XCMG friction plates.
Regular inspection for wear, scoring, or glazing is essential; any deterioration requires immediate replacement to maintain safety and performance.
The 800374311 Friction Plate is produced using advanced bonding, stamping, and finishing technologies to achieve consistent material thickness, flatness, and surface finish.
The steel core is stamped from high‑strength sheet and precision‑ground to ensure perfect flatness, while the friction material is bonded under controlled pressure and temperature for optimal adhesion.
XCMG’s engineering team has optimised the groove geometry to maximise oil flow and heat dissipation, minimising thermal stress and extending the friction material’s service life.
The friction surface is precision‑ground to a specified finish, ensuring uniform contact with mating steel plates and eliminating high spots that cause uneven wear.
All plates are 100% inspected for thickness, flatness, and friction material integrity, with sample units subjected to dynamometer testing to verify performance.
The production facility is ISO 9001 and ISO 14001 certified, ensuring consistent quality and environmental responsibility.
The 800374311 Friction Plate is available with either sintered bronze or high‑grade paper‑based friction materials, allowing selection based on application requirements.
Sintered bronze plates offer exceptional heat tolerance and wear resistance, ideal for severe‑duty applications with high energy inputs, such as heavy braking and frequent clutching.
Paper‑based plates provide smoother engagement and lower inertia, suitable for applications requiring precise modulation and reduced shift shock.
The bonding process uses high‑strength adhesives that resist oil and temperature degradation, ensuring the friction material remains securely attached to the steel core.
Accelerated wear testing has confirmed that these plates maintain their coefficient of friction within specifications for over 8,000 hours of simulated mining operation.
All materials are RoHS compliant and free from hazardous substances, meeting strict environmental regulations.
The 800374311 Friction Plate is designed for professional installation by experienced technicians, using appropriate tools and following established procedures.
Begin by isolating the system and draining the fluid, then disassemble the clutch pack or brake assembly to access the friction plates, noting their order and orientation.
Carefully remove the old plates, inspect the steel plates for wear or scoring, and clean all components thoroughly with a lint‑free cloth and approved solvent.
Soak the new 800374311 friction plates in clean transmission or brake fluid for at least 30 minutes before installation to ensure proper oil saturation.
Reassemble the clutch or brake pack, alternating friction and steel plates, and torque all fasteners to specification, then refill with the recommended fluid.
A typical friction plate replacement can be completed in 2‑3 hours, restoring original shift and braking performance.
Investing in the 800374311 Friction Plate delivers significant long‑term savings by improving transmission efficiency, reducing brake wear, and preventing costly driveline failures.
Worn plates cause clutch slippage, increasing heat generation and fuel consumption – this plate restores full torque transfer, improving fuel economy by up to 5%.
By providing consistent friction, the plate also reduces shock loads on driveline components, extending the life of bearings, shafts, and seals.
Reduced brake wear means fewer rotor and pad replacements, lowering parts and labour costs over the machine’s service life.
Field data from a large copper mine showed a 35% reduction in transmission rebuild costs and a 30% decrease in brake system maintenance after standardising on genuine XCMG friction plates.
The plate’s durable construction ensures it outlasts multiple service intervals, offering excellent return on investment.
XCMG is committed to sustainable manufacturing, and the 800374311 Friction Plate reflects this through its use of recyclable materials and energy‑efficient production processes.
The plate’s extended service life reduces material waste and the environmental impact of frequent replacements.
By improving transmission and brake efficiency, the plate also contributes to lower fuel consumption and reduced CO₂ emissions.
The steel core is fully recyclable at end‑of‑life, supporting circular economy principles.
Choosing genuine XCMG driveline components supports responsible equipment management while delivering superior performance.
The plate’s ease of removal also facilitates efficient recycling.
The 800374311 Friction Plate is stocked in XCMG’s regional distribution centres across North America, Europe, Asia, Africa, and Australia, ensuring rapid availability.
Each plate is individually packaged with anti‑corrosion protection and foam padding to prevent damage during transit.
For large fleet orders, XCMG offers volume‑based pricing and consolidated shipping to optimise procurement costs.
Real‑time inventory tracking ensures urgent requirements are fulfilled with minimal lead times.
The robust packaging protects the plate from physical damage and corrosion during storage.
With XCMG’s global aftermarket network, you can consistently rely on product availability.
Every 800374311 Friction Plate is manufactured in an ISO 9001 and ISO 14001 certified facility with full material traceability.
Incoming friction materials and steel cores are inspected for thickness, flatness, and bond integrity to ensure compliance.
During bonding, temperature and pressure are continuously monitored to maintain consistent adhesive cure and friction material density.
Sample plates from each batch undergo friction coefficient testing, wear testing, and heat resistance testing to validate performance.
Each plate is visually inspected for surface defects, groove integrity, and dimensional accuracy before packaging.
Only plates that pass all quality checks are released, ensuring reliable performance.
Aftermarket friction plates often use inferior materials, poor bonding, or incorrect groove patterns, leading to premature wear, glazing, and failure.
The genuine 800374311 is engineered to XCMG’s exacting standards, ensuring correct material, precise dimensions, and optimal friction characteristics.
Its superior durability and consistent performance deliver long‑lasting reliability, reducing maintenance and downtime.
Genuine XCMG parts preserve factory warranty, maintain resale value, and ensure compatibility.
Backed by XCMG’s global quality standards, trust this friction plate in the harshest conditions.
Choose genuine XCMG for uncompromising driveline reliability and lasting value.
The XCMG 800374311 Friction Plate is an essential driveline component for any articulated dump truck, providing reliable friction performance for smooth shifting and effective braking.
Its precision‑engineered design, advanced friction materials, and robust bonding deliver consistent performance, reduced wear, and extended service life.
By restoring original friction characteristics, this plate reduces downtime, lowers maintenance costs, and extends the service life of your ADT.
Always source genuine XCMG parts from authorised dealers for guaranteed authenticity and quality.
Choose the 800374311 friction plate for dependable driveline performance and lasting operational peace of mind.
Partner with XCMG – your trusted source for heavy equipment friction solutions that deliver real value.
OEM 800374311 – XCMG Friction Plate – the definitive friction material solution for your ADT’s transmissions and brake systems. Engineered for performance, built for durability, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
