OEM 800374122 The XCMG Bushing (800374122) is a genuine OEM precision‑engineered wear component designed for critical pivot and articulation points in the suspension and linkage systems of XCMG articulated dump trucks. This durable bushing, identified by part number 800374122, ensures reliable load transfer, smooth rotational movement, and exceptional durability in the most demanding mining, quarrying, and heavy construction environments worldwide.
Manufactured from high‑grade self‑lubricating or engineered thermoplastic materials with precision‑machined inner and outer diameters, the 800374122 bushing delivers consistent friction reduction, excellent wear resistance, and exceptional durability across a wide temperature range (-40°C to +120°C). Its precision‑engineered geometry and exacting dimensional tolerances guarantee a perfect, drop‑in fit without modification.
The 800374122 bushing features a carefully controlled surface finish that ensures smooth articulation, a robust construction that resists deformation under heavy loads, and a corrosion‑resistant finish that ensures long‑term serviceability, making it an essential component for maintaining suspension integrity, preventing premature wear, and maximising uptime in your ADT fleet.
The 800374122 Bushing is manufactured from premium self‑lubricating or engineered thermoplastic materials with precision‑machined inner and outer diameters, ensuring consistent friction reduction, excellent wear resistance, and reliable performance across every unit.
Its precision‑engineered geometry provides an optimal bearing surface for rotating or oscillating shafts, reducing friction and wear while maintaining smooth, consistent articulation under heavy loads.
The carefully controlled surface finish minimises friction and heat generation, extending the service life of both the bushing and the mating shaft or pin.
The robust construction resists deformation, crushing, and extrusion under high loads, ensuring consistent clearance and alignment throughout the bushing’s service life.
The corrosion‑resistant coating provides a durable barrier against rust, pitting, and chemical attack, ensuring the bushing remains serviceable even in wet, chemically aggressive mining environments.
In demanding applications such as open‑pit mines, aggregate quarries, and heavy construction sites, the 800374122 delivers reliable, long‑lasting wear protection for your ADT’s suspension and linkage systems.
The 800374122 bushing is produced using advanced moulding, machining, and finishing processes, achieving tight tolerances on all critical dimensions, including inner diameter, outer diameter, and overall length.
The self‑lubricating bronze or engineered thermoplastic material is carefully selected for its excellent wear resistance, low friction coefficient, and resistance to degradation, ensuring reliable performance under cyclic loading.
The bearing surfaces are precision‑ground or burnished to a surface finish of Ra ≤ 0.8 µm, providing an optimal interface for shaft contact and reducing friction and wear.
After production, each bushing undergoes 100% dimensional inspection, visual inspection, and hardness verification (where applicable) to ensure it meets the required specifications.
Sample units from each production batch are subjected to wear testing, load testing, and corrosion testing to validate long‑term durability and performance.
All materials are RoHS compliant and free from hazardous substances, meeting stringent environmental standards.
Articulated dump trucks rely on bushings to provide low‑friction bearing surfaces at pivot points in suspension arms, steering linkages, and articulation joints, making the quality and precision of each bushing vital to overall machine stability, handling, and reliability.
The 800374122 bushing serves as a critical wear component in these assemblies, protecting the pin or shaft from wear and ensuring smooth, consistent articulation.
A substandard or worn bushing can lead to increased play, misalignment, accelerated pin wear, and catastrophic joint failure — risks that are eliminated by using genuine XCMG bushings.
Field data from mining operations shows that ADTs equipped with genuine XCMG bushings experience 40% fewer joint‑related failures and a 25% reduction in suspension maintenance, directly improving machine availability and safety.
The bushing’s low‑friction surface and precision‑ground finish reduce wear on pivot pins, extending the life of mating components and reducing overall maintenance costs.
Regular inspection of bushings for signs of wear, scoring, or deformation is recommended; any compromised bushings should be replaced promptly with genuine 800374122 components.
The 800374122 bushing is manufactured from high‑grade self‑lubricating materials that provide an exceptional combination of wear resistance, low friction, and durability, ensuring reliable performance under the most severe operating conditions.
The self‑lubricating properties of the material reduce the need for frequent greasing, minimising maintenance requirements and reducing the risk of lubrication‑related failures.
The precision‑ground surfaces maintain their dimensional accuracy over extended service life, preventing premature pin wear and maintaining correct clearances.
The corrosion‑resistant coating protects against rust and chemical attack, ensuring the bushing remains serviceable even in harsh mining environments.
With proper installation and routine maintenance, the 800374122 bushing can provide reliable service for the entire lifespan of the ADT, reducing the need for premature replacements.
The combination of high‑quality materials, precision manufacturing, and robust design makes this bushing ideal for the most demanding off‑highway applications.
The 800374122 bushing is specifically designed to fit XCMG’s full range of articulated dump trucks, including the XDA30, XDA40, XDA45, XDA45U, XDA60, and TA30 models, as well as their respective variants and suspension/linkage configurations.
Its dimensions, material specifications, and surface finish are identical to the original factory‑fitted component, ensuring a direct, drop‑in replacement without the need for modifications.
The bushing is compatible with XCMG’s standard suspension arms, steering linkages, and articulation joints, simplifying inventory management and reducing the risk of incorrect part selection for fleet operators.
Whether used in standard ADT applications or in severe‑duty mining operations, the 800374122 bushing provides consistent wear protection across all suspension and linkage systems, backed by XCMG’s engineering expertise.
For operators with mixed fleets, this bushing offers the assurance of OEM quality and fitment, reducing the risk of mismatched components and joint performance issues.
Always verify the specific application and bushing dimensions for your ADT model to ensure the correct component selection.
The 800374122 bushing is designed for straightforward installation using standard workshop tools, minimising downtime and labour costs during routine servicing or component replacement.
Before installation, carefully inspect the bushing for any signs of damage, corrosion, or wear that may have occurred during storage or transport, and ensure that the housing bore and mating shaft are clean, smooth, and free from burrs.
Apply a thin film of clean grease or assembly lubricant to the outer diameter and inner diameter to facilitate installation and prevent galling during initial operation.
Using appropriate installation tools, carefully press or slide the bushing into the housing bore, ensuring that it is fully seated and correctly positioned.
During routine maintenance, inspect the bushing for signs of wear, scoring, deformation, or corrosion, and replace it if any damage is detected.
Always handle the bushing with clean, lint‑free gloves to prevent contamination of the precision‑machined surfaces.
Investing in the genuine 800374122 bushing delivers significant long‑term savings by preventing joint failures, reducing pin wear, and avoiding costly downtime that can result from substandard wear components.
A single joint failure due to a worn or damaged bushing can cost over $2,500 in parts, labour, and lost production — a risk that is virtually eliminated with OEM‑quality components.
Over a typical 15,000‑hour service life, an ADT’s suspension and linkage bushings can experience millions of articulation cycles. The 800374122 bushing’s robust construction and wear resistance ensure consistent performance throughout.
By maintaining precise joint clearances and reducing friction, the bushing also reduces wear on pivot pins and other mating components, lowering overall maintenance costs and extending component life.
Field data from large‑scale mining operations shows that using genuine XCMG bushings reduces joint‑related downtime by up to 30%.
The bushing’s durable materials and corrosion‑resistant finish ensure it remains serviceable even after years of exposure to harsh conditions, eliminating the need for premature replacement and reducing lifecycle costs.
XCMG is committed to sustainable manufacturing practices, and the 800374122 bushing reflects this through its use of recyclable materials and energy‑efficient production processes.
The bushing’s long service life, typically exceeding 10,000 hours in normal operating conditions, reduces material waste and the environmental impact associated with frequent replacements.
By maintaining joint integrity and preventing component failures, the bushing also helps prevent fluid leaks and secondary damage, supporting environmental stewardship and regulatory compliance.
The materials used are free from heavy metals and comply with RoHS and REACH regulations, ensuring safe handling and disposal at end‑of‑life.
Choosing genuine XCMG suspension and linkage components supports responsible equipment management while delivering superior operational reliability and performance.
The bushing’s robust, precision‑engineered design allows for reliable long‑term service, minimising resource consumption and waste generation.
The 800374122 bushing is stocked in XCMG’s regional distribution centres across North America, Europe, Asia, and Australia, ensuring rapid availability to support your maintenance schedules and minimise downtime.
Each bushing is individually packaged in protective anti‑corrosion bags and bulk‑packed in cartons to prevent damage and surface degradation during transit and warehousing.
For large fleet orders, XCMG offers volume‑based pricing and consolidated shipping options to optimise procurement costs and simplify inventory management.
Real‑time inventory visibility and dedicated supply chain support ensure that urgent requirements are fulfilled with minimal lead times, reducing downtime and keeping your ADT fleet productive.
The robust packaging protects the bushing from corrosion and physical damage during storage, preserving its condition until installation.
With XCMG’s global aftermarket network, you can rely on consistent product quality and availability to keep your fleet moving and productive.
Every 800374122 bushing is manufactured in an ISO 9001 and ISO 14001 certified facility with full material traceability from raw material to finished product.
Incoming raw materials are tested for chemical composition, hardness, and wear resistance to ensure they meet the required specifications.
During production, critical dimensions such as inner diameter, outer diameter, and overall length are continuously monitored using automated measurement systems, and a 100% dimensional inspection is performed on every finished bushing.
After machining, each bushing undergoes visual inspection, surface finish verification, and hardness testing (where applicable) to ensure it meets the required quality standards.
Sample units from each production batch are subjected to wear testing, load testing, and corrosion testing to validate long‑term durability and performance.
Only bushings that pass all quality checks are released, ensuring that you receive a reliable, high‑performance suspension and linkage component.
Aftermarket bushings often use inferior materials, imprecise dimensions, or poor surface finish that lead to premature wear, scoring, and costly joint damage.
The genuine 800374122 is engineered to XCMG’s exacting standards, ensuring correct fit, reliable wear protection, and long‑lasting durability for optimal suspension and linkage protection.
Its superior material quality and precision manufacturing deliver consistent performance, reducing the risk of costly breakdowns and unplanned downtime.
Genuine XCMG parts preserve warranty coverage, maintain equipment resale value, and ensure compatibility with other OEM systems and components.
Backed by XCMG’s global quality standards and technical support, you can trust the performance and reliability of this bushing.
Choose genuine XCMG for uncompromising wear protection in the toughest operating conditions.
The XCMG 800374122 Bushing is an essential suspension and linkage component for any articulated dump truck, ensuring reliable wear protection, smooth articulation, and long service life.
Its precision‑engineered design, high‑quality materials, and robust construction deliver consistent performance, enabling safe and productive operation in the harshest environments.
By safeguarding suspension and linkage systems, this bushing reduces downtime, lowers maintenance costs, and extends machine service life.
Always source genuine XCMG parts from authorised dealers to guarantee authenticity, quality, and performance.
Choose the 800374122 bushing for dependable wear protection and lasting operational peace of mind.
Partner with XCMG – your trusted source for heavy equipment suspension and linkage components that deliver real value.
OEM 800374122 – XCMG Bushing – the definitive wear protection component for your ADT’s suspension and linkage systems. Engineered for durability, designed for simplicity, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
