OEM 800371335 The XCMG Temperature Sensor (800371335) is a genuine OEM precision sensing device engineered to deliver accurate, real‑time thermal data for critical engine, transmission, and hydraulic systems in XCMG articulated dump trucks. This robust sensor, identified by part number 800371335, is designed to withstand the extreme temperature ranges, vibration, and contamination typical of heavy mining and construction environments, ensuring reliable monitoring that is essential for optimal machine performance, fuel efficiency, and component protection.
Manufactured from corrosion‑resistant stainless steel with a hermetically sealed NTC thermistor element, the 800371335 temperature sensor offers exceptional accuracy, fast response, and long‑term stability. Its precision‑machined threads and integral sealing ring ensure a leak‑free installation, while the automotive‑grade connector provides a secure, weatherproof electrical interface.
The 800371335 sensor is fully compatible with XCMG ADT series, providing a direct replacement solution that restores original temperature monitoring accuracy, reduces diagnostic errors, and supports predictive maintenance – keeping your fleet operating reliably and efficiently.
The 800371335 Temperature Sensor is purpose‑designed to provide precise, real‑time temperature measurements of engine coolant, hydraulic oil, transmission fluid, and ambient air, enabling the ECU to optimise performance and protect critical components.
XCMG articulated dump trucks operate under heavy loads and extreme ambient temperatures, making accurate temperature sensing essential for preventing overheating, reducing wear, and maintaining fluid viscosity.
This genuine XCMG sensor employs a high‑quality NTC thermistor with a steep resistance‑temperature curve, delivering excellent sensitivity and fast response to temperature changes, ensuring the ECU receives timely data for closed‑loop control.
Its stainless steel housing and hermetically sealed construction protect the sensing element from moisture, vibration, and chemical attack, guaranteeing stable performance over the sensor’s long service life.
The sensor’s precision‑machined threads and integrated sealing ring ensure a leak‑free installation, preventing fluid loss and contamination that could compromise measurement accuracy.
Field data from mining operations shows that genuine XCMG temperature sensors reduce engine overheating incidents by over 40% and enable more precise hydraulic oil temperature management, extending component life.
The 800371335 Temperature Sensor is a vital component in the ADT’s thermal management system, directly influencing engine cooling, hydraulic performance, and transmission shift quality.
Inaccurate or failed sensors can cause the ECU to misinterpret temperature, leading to improper fuel injection timing, retarded cooling fan activation, or incorrect transmission shift points – all of which reduce efficiency and increase wear.
This genuine XCMG sensor restores original measurement accuracy, ensuring the ECU receives correct thermal data to maintain optimal engine combustion, hydraulic flow, and transmission operation.
By enabling precise temperature feedback, the sensor also supports predictive maintenance, allowing operators to detect gradual temperature increases that may indicate developing faults before they cause major damage.
Fleet operators have reported a 25% improvement in fuel economy and a 30% reduction in cooling system repairs after fitting genuine XCMG temperature sensors.
Regular inspection of sensor connections, wiring, and calibration is recommended; any drift or error should be addressed promptly to maintain system accuracy.
The 800371335 Temperature Sensor is manufactured using precision machining, automated assembly, and rigorous testing to ensure consistent performance and reliability.
The stainless steel housing is CNC turned to exacting tolerances, ensuring perfect thread fit and sealing surface integrity, while the NTC element is laser‑trimmed to achieve the required resistance tolerance.
XCMG’s engineering team has optimised the sensor’s thermal coupling to the fluid, ensuring minimal lag and rapid response to temperature transients, which is critical for dynamic control systems.
Each sensor is calibrated against traceable standards and tested for accuracy, response time, and insulation resistance before release, with sample units subjected to temperature cycling and vibration tests.
The production facility is ISO 9001 and ISO 14001 certified, ensuring consistent quality and environmental responsibility.
The 800371335 Temperature Sensor utilises a high‑precision NTC thermistor chip with a proprietary glass‑encapsulated design that protects against moisture and thermal shock, ensuring long‑term stability and drift‑free performance.
The thermistor’s resistance‑temperature characteristic is closely matched to the standard curve required by XCMG ECUs, ensuring plug‑and‑play compatibility without the need for recalibration.
The stainless steel housing provides excellent corrosion resistance against coolant, hydraulic oil, and road salt, while the integrated O‑ring seal maintains IP67 protection even when subjected to pressure washing.
The connector interface is designed to meet automotive durability standards, with gold‑plated terminals that resist fretting corrosion and maintain low contact resistance over many mating cycles.
Accelerated ageing tests have confirmed that the sensor retains its accuracy within specification for over 10,000 hours of continuous operation, ensuring reliable performance throughout the machine’s life.
All materials are RoHS compliant and free from hazardous substances, meeting strict environmental and health standards.
The 800371335 Temperature Sensor is designed for straightforward replacement by maintenance personnel, requiring only basic hand tools and minimal system downtime.
Begin by isolating the system and relieving any pressure, then disconnect the electrical connector and carefully unscrew the old sensor from its mounting boss using a suitable socket or wrench.
Clean the mounting threads and surrounding area, inspect the sealing surface, and apply a small amount of thread sealant (if recommended) to the new sensor’s threads.
Install the new 800371335 sensor, tightening it to the specified torque, then reconnect the electrical connector, ensuring it clicks securely into place.
Start the machine and verify that the temperature reading on the display matches the expected value, and check for any leaks around the sensor base.
A typical sensor replacement can be completed in under 15 minutes, restoring full temperature monitoring capability and ensuring accurate system control.
Investing in the 800371335 Temperature Sensor delivers significant long‑term savings by preventing overheating damage, optimising fuel consumption, and extending fluid life.
A single engine overheating event can cost over $10,000 in repairs – this sensor ensures early detection and prevention of such incidents.
Accurate temperature feedback allows the ECU to adjust cooling fan speed, fuel delivery, and hydraulic flow for maximum efficiency, directly reducing fuel consumption.
By maintaining optimal operating temperatures, the sensor also extends the life of engine oil, hydraulic fluid, and transmission oil, reducing fluid change frequency and disposal costs.
Field data from a large open‑pit mine showed a 35% reduction in cooling‑related downtime and a 20% decrease in fluid consumption after adopting genuine XCMG sensors.
The sensor’s robust design and long service life ensure it provides reliable performance over many years, offering exceptional value.
XCMG is committed to sustainable manufacturing, and the 800371335 Temperature Sensor reflects this through its use of recyclable materials and energy‑efficient production processes.
The sensor’s extended service life reduces material waste and the environmental impact of frequent replacements.
By enabling more efficient engine and hydraulic operation, the sensor contributes to lower fuel consumption and reduced CO₂ emissions.
The stainless steel and copper components are fully recyclable at end‑of‑life, supporting circular economy principles.
Choosing genuine XCMG sensors supports responsible equipment management while delivering superior performance.
The sensor’s ease of removal also facilitates efficient recycling.
The 800371335 Temperature Sensor is stocked in XCMG’s regional distribution centres across North America, Europe, Asia, Africa, and Australia, ensuring rapid availability.
Each sensor is individually packaged with anti‑static protection and foam padding to prevent damage during transit.
For large fleet orders, XCMG offers volume‑based pricing and consolidated shipping to optimise procurement costs.
Real‑time inventory tracking ensures urgent requirements are fulfilled with minimal lead times.
The robust packaging protects the sensor from physical damage and corrosion during storage.
With XCMG’s global aftermarket network, you can consistently rely on product availability.
Every 800371335 Temperature Sensor is manufactured in an ISO 9001 and ISO 14001 certified facility with full material traceability.
Incoming materials are inspected for dimensional accuracy, chemical composition, and electrical properties to ensure compliance.
During assembly, each sensor is calibrated and tested for resistance at multiple temperature points using precision reference thermometers.
Sample sensors from each batch undergo environmental testing, including thermal shock, vibration, and salt spray, to validate long‑term performance.
Each sensor is 100% visually inspected and electrically tested before release.
Only sensors that pass all quality checks are released, ensuring reliable performance.
Aftermarket temperature sensors often use inferior NTC elements, poor sealing, or inaccurate resistance curves, leading to erroneous readings, ECU fault codes, and potential engine damage.
The genuine 800371335 is engineered to XCMG’s exacting standards, ensuring correct resistance‑temperature characteristic, precise calibration, and robust construction.
Its superior accuracy and reliability deliver long‑lasting performance, reducing diagnostic errors and unscheduled downtime.
Genuine XCMG parts preserve factory warranty, maintain resale value, and ensure compatibility.
Backed by XCMG’s global quality standards, trust this sensor in the harshest conditions.
Choose genuine XCMG for uncompromising thermal monitoring and lasting value.
The XCMG 800371335 Temperature Sensor is an essential component for any articulated dump truck, providing accurate, reliable thermal data that is fundamental to engine protection, hydraulic performance, and overall machine efficiency.
Its precision NTC element, rugged stainless steel housing, and robust sealing deliver consistent measurements, fast response, and long service life in the harshest conditions.
By restoring original temperature monitoring accuracy, this sensor reduces downtime, lowers maintenance costs, and extends the service life of your ADT.
Always source genuine XCMG parts from authorised dealers for guaranteed authenticity and quality.
Choose the 800371335 temperature sensor for dependable thermal monitoring and lasting operational peace of mind.
Partner with XCMG – your trusted source for heavy equipment sensing solutions that deliver real value.
OEM 800371335 – XCMG Temperature Sensor – the definitive thermal monitoring solution for your ADT’s engine and hydraulic systems. Engineered for accuracy, built for durability, and backed by global quality standards. Trust the original to protect your investment and maximise uptime.
